Loading...
Loading...
All product recalls associated with Okla Homer Smith.
Total Recalls
1000
Past Year
1000
Class I (Serious)
127
Most Recent
Jan 2026
Data from FDA, USDA, CPSC, and NHTSA public records. Recall counts vary by company size, industry, and reporting practices. Always check official sources for current information.
Crib Teething Rails Recalled by Okla Homer Smith Furniture NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE July 13, 1978 Release # 78-063 Crib Teething Rails Recalled WASHINGTON, D.C. (July 13) -- Okla Homer Smith Furniture Manufacturing Co., Inc., Ft. Smith, Ark., in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced a recall and replacement program for plastic teething rails on about 70,000-80,000 full-sized baby cribs made by the company. The cribs have been sold under about 180 model numbers by numerous department and baby furniture stores across the country, including Sears, Roebuck and Co., and Montgomery Ward. A spokesman for the furniture company said the plastic teething rails may become brittle and pose a potential hazard of cracking when chewed. Broken pieces could be swallowed by a teething infant, become lodged in the windpipe or perhaps injure a baby in other ways. The cribs with the teething rails being recalled can be identified by the label, "OKLA HOMER SMITH FURNITURE MANUFACTURING CO., INC.," on the inside of the headboard near the bottom, and a numerical manufacturing date for the period June 1976 through December 1976, ink-stamped underneath the headboard. Only cribs made in the June-December 1976 timeframe carry the potentially defective teething rails. Since the model numbers are too voluminous to list here, it is important that consumers look for the manufacturer's label and the manufacture date to see if they own one of the cribs. All of the cribs are wooden, and almost all of the teething rails are white, with about one percent being red. The cribs ranged in price from $50-$100. New rail covers can be obtained free-of-charge by contacting the retailer, or Okla Homer Smith at P.O. Box 1148, Ft. Smith, Ark. 72902. Consumers should be prepared to provide their names, addresses, whether the cribs are single - or double-drop-side units, and whether teething rails are present on the end panels. Since the teething rails can crack at any time, anyone owning one of the cribs is entitled to free replacement rail covers even if the teething apparatus currently does not show signs of brittleness.
Pellet Pistols Repaired by Crosman Arms NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE March 2, 1978 Release # 78-015 Repair Program For Hazardous Pellet Pistols Announced WASHINGTON, D.C. (Mar. 2) -- The Consumer Product Safety Commission (CPSC), in cooperation with Crosman Arms, a division of the Coleman Company, Inc. announced today that certain single shot, pump-up pellet pistols may discharge accidentally due to inadequately tightened screws. Approximately 35,000 Model 1377 "American Classic" and Model 1322 "Medalist" pistols are suspect. They were distributed during 1977 and through January, 1978 and may have an improperly installed screw. These pistols operate normally at first but, repetitive use may cause the grip frame to loosen. If this occurs, there are three possible consequences: The pistol cannot be cocked and is inoperative unless manually held together. It can be cocked, but may discharge with the safety on. It can be cocked and may discharge without the trigger being pulled. To prevent this from happening, Crosman advises owners of the pistols to take their pistols to any Crosman authorized service center. A list of those service centers was provided with each pistol. The pistols should not be used until examined by a Crosman representative. All Model 1377 and 1322 pistols should be examined. Models produced after January, 1978 DO NOT contain the defect and are identified by an "R" stamped on the pistols and on the outside of the pistol carton. The service will be performed at no cost to the customer. For more information or for the name of the nearest service center, contact Crosman Arms, 980 Turk Hill Road, Fairport, New York 14450. Telephone (716) 223-6000.
January 3, 1978 Release # 78-001 Decorative Christmas Light Bulbs Recalled WASHINGTON, DC (Jan. 3) -- Le Gran Imports, Long Beach, California, and the U.S. Consumer Product Safety Commission (CPSC) today announced that Le Gran Imports is voluntarily withdrawing from sale certain imported Christmas light replacement bulbs which were made in Taiwan. The Commission staff discovered a defect in some of the bulbs which could create a fire or shock hazard when electrical current is first applied. The defect is a thin strand of wire approximately l/4" in length or longer, which may protrude from the side of the bulb base or from the solder tip at the base of the bulb. Consumers who may have purchased these replacement bulbs are urged to immediately inspect them to see if a thin strand of wire is protruding from the side of the bulb base or from the solder tip at the base of the bulb. If a protruding wire is present, the bulb is defective and should not be used. The consumer should return the defective bulbs to the place of purchase for exchange or refund. The bulbs subject to the defect are identified on the package as Item No. LC-7005P size 7 l/2. The words "Christmas Lamps" and the name "Le Gran Imports" also appear on the package. The bulbs, sold five to a package, retailed for approximately $.75¢ or less and were sold nationwide. Le Gran Imports and the Commission warn that other distributors may have imported these same bulbs from Taiwan and may be selling them under different brand names. The consumer is cautioned to inspect all such replacement light bulbs before installing them in decorative lighting fixtures
December 21, 1977 Release # 77-128 WASHINGTON, D.C. (Dec. 21) -- Market Research Imports (MRI), Incline Village, Nevada, and the U.S. Consumer Product Safety Commission today announced that MRI is voluntarily withdrawing from sale certain imported Christmas light replacement bulbs which were made in Taiwan. MRI discovered a defect in some of the bulbs which could cause them to shatter with explosive force when electrical current is first applied. The defect is a thin strand of wire approximately l/8" to l/4" in length, which may protrude from the solder tip at the base of the bulb. Consumers who may have purchased these replacement bulbs are urged to immediately inspect them to see if a thin strand of wire is protruding from the solder tip at the base of the bulb. If a protruding wire is present, the bulb is defective. The defect may be safely removed by simply snipping off the protruding wire at the solder tip with a pair of. scissors or pliars with cutting edges. The consumer may also elect to return the defective bulbs to the place of purchase for exchange or refund. Two models of bulbs are subject to the defect, and are identified on the package as Item No. LC-9004 size 9 l/4, and Item No. LC-7004 size 7 l/2. The words "Replacement Bulbs" and the letters "MRI" also appear on the package. The bulbs, sold four to a package, retailed for approximately $1.00 or less and were sold nationwide. MRI and the Commission warn that other distributors may have imported these same bulbs from Taiwan and may be selling them under different brand names. The consumer is cautioned to inspect all such replacement light bulbs before installing them in decorative lighting fixtures
October 25, 1977 Release # 77-111 WASHINGTON, DC (Oct. 25) -- The U.S. Consumer Product Safety Commission (CPSC), in cooperation with the Crosman Arms Company, a division of The Coleman Company, Inc., announced today the possibility of an inoperative safety in certain BB repeater pistols marketed under the Crosman name. About 25,000 model number 454 repeater pistols were manufactured and distributed nationwide during 1977 for recreational shooting. In a portion of these, an improper dimension on a receiver cover raises the possibility of the pistol discharging when the trigger is pulled with the safety engaged. The company is trying to locate the pistols involved in order to make modifications to eliminate the possible problem at no cost to the consumer. The pistols are identified as Crosman model 454, 16-shot, semi-automatic .177-caliber CO2 powered BB pistols. Suspect pistols can be identified by the first three digits of the serial number. The digits are 477, 577, 677, 777, or 877. The serial number is located on the left side of the pistol just below the name Crosman. Pistols bearing these serial numbers but with an "R" stamped on the right-hand side of the casting under the grip or below the barrel on the front of the receiver have been inspected by Crosman and do NOT contain the possible malfunction. Owners of the pistols are requested to take the pistol to the nearest authorized service center listed on a brochure which was included with the pistol when purchased. Owners may also write the Crosman Arms Company, 980 Turk Hill Road, Fairport, New York 14450 or call the Crosman service department at (716)223-6000
October 21, 1977 Release # 77-110 WASHINGTON, D.C. (Oct. 21) -- The U.S. Consumer Product Safety Commission (CPSC) today warned consumers of a possible serious shock hazard from certain portable, immersible electric water heaters manufactured by the Ambory Corp., of Hazel Park, Mich. One of these heaters was reportedly involved in the recent electrocution of a 17-year-old girl in Little Fork, Minn. Sold to heat water in and around the home, the heaters are constructed of an exposed resistive heating element contained within a perforated metal case which permits water to contact the heating mechanism. This element is powered by electrical current from a standard electrical outlet. Potential for serious shock injuries, possibly resulting in electrocution, exists when water contacts the powered heating element. The four heaters in question are the "Ambory Special," "Jiffy, Jr. ," "Jiffy, Sr.," and "Ram." Distributed nationwide, they are sold primarily in hardware stores and tack shops. CPSC estimates that approximately 50,000 of the immersible water heaters are currently in consumers' hands. On October 20, the Commission authorized its staff to proceed against the Ambory Corp.9 to remove this alleged hazard from the marketplace. CPSC urges consumers to take extreme caution if they use one of these heaters. All four models are sold with instructions warning users not to touch the water container or the water itself while the heater is "on." Consumers are also directed to turn off the heater and unplug it before testing the water temperature. Anyone aware of any shock or electrocution incidents associated with an Ambory immersible electric water heater is urged to immediately call CPSC's toll-free Hotline at 800/638-2772
October 3, 1977 Release # 77-103 WASHINGTON, D.C. (Oct. 3) -- The U.S. Consumer Product Safety Commission (CPSC) in cooperation with the Kentucky Department of Human Resources and the American Printing House for the Blind, today announced the recall of 12 products which have excessive Lead content their paint. The products were produced and distributed nationwide by the American Printing House for the Blind in Louisville, Kentucky, and are intended for use by blind children. these products are not normally found on retail shelves, but are sold by mail order to consumers, school systems, and government agencies. A regulation under the Federal Hazardous Substances Act establishes a 0.5% permissible level for lead in paint to reduce risk of lead poisoning to children who may ingest paint chips or peelings. No injuries or illnesses have been reported associated with the products now being recalled. The products currently under recall are: l-0301 Biological Modelsl-0332 Land Forml-0340 Mitchell Form Setsl-0357 Sports Field fitl-0371 Shape Boardl-0382 Textured Blocksl-0372 Puzzle Form Board Kitl-0872 Sound Matching Board 11l-0108 Large U.S. Mapl-0109 Small U.S. Mapl-0329 Fractional Partsl-0359 Stokes Place Holder Persons who have these products should return them to the place of purchase for replacement or a full refund
September 2, 1977 Release # 77-096 WASHINGI'ON, D.C. (Sept. 2) -- The U.S. Consumer Product Safety Commission (CPSC) has culminated a major regulatory proceeding by issuing a final ban on lead-containing paint and on toys and furniture coated with such paint. This action was taken to reduce the risk of lead poisoning in children who may ingest paint chips or peelings. Until now, the maximum level of lead allowed in consumer paints has been 0.5 percent. CPSC has lowered this amount to 0.06 percent, a level conforming with the maximum permissible under the Lead-Based Paint Poisoning Prevention Act. This Act, administered primarily by the Department of Housing and Urban Development, prohibits application of lead-based paint to housing constructed or rehabilitated with federal assistance. Exempted from the new ban are mirrors backed with lead-containing paint which are part of articles of furniture, as well as artists' paints and related materials. Also exempted, provided they bear specified cautionary labeling, are certain agricultural and industrial coatings, touch-up coatings for appliances and lawn and garden equipment, graphic arts coatings, and certain coatings for powered model aircraft. This ban under the Consumer Product Safety Act will take effect 180 days after publication September 1 in the Federal Register and will apply to products manufactured on and after that date
Refrigerator Repaired by Amana Amana Refrigeration, Inc., Amana, Iowatoday announced voluntary corrective action program involving approximately 240,000 Amana side-by-side refrigerator/freezers manufactured between February 1969 and September 1974. Those refrigerator/freezers to be repaired are Amana model numbers SR 17, SR 19, SR 22, SR 25, SD 19, SD 22, and SD 25. The units can be further identified by checking the serial numbers on the serial plate located behind the removable black grill at the front of the refrigerator/freezer. Those serial numbers beginning with the letters S, E, B, L, A, or C are affected by this program. These refrigerator/freezers contain a hinge wire assembly in both of the doors which powers the heaters to the butter keeper and the anti-sweat device. The hinge wire may wear from frequent door openings causing contact between the bare wire and the inside of the door. There is a possibility that someone contacting or grasping both of the doors at the same time will be severely shocked. Forty-one shock incidents have been reported to the Commission. Amana is identifying and contacting owners of these refrigerator/freezers by letter in order to advise that modifications to eliminate this potential hazard should be made by the owner without delay. Until the written instructions are received consumers owning this product are advised to contact Amana through its toll-free number 800/553-6333 or write directly to Amana at: Amana Refrigeration Inc., Amana, Iowa 52204. In the event that Amana can not be reached, consumers are advised to contact the U.S. Consumer Product Safety Comnission's toll-free HOTLINE at 800/638-2772. Important Information About The Safety Of Your Side-By-Side Refrigerator Dear Amana Owner: Amana products have earned an excellent reputation for quality and safety. This comes in part through continued testing and monitoring of performance both in our plants and in the homes of our customers. However, some of the units, we have discovered, have had the wiring installed incorrectly. You may have one of these units. Excessive wear in these units can result in the electrical wires wearing out in the freezer or refrigerator door. Should this happen in either door, you may receive a severe electrical shock if you touch both door handles at the same time. The units involved were produced from February 1969 through September 1974, models beginning with the letters SR or SD. These are further identified by the letters S, E, B, L, A or C preceding the serial numbers. Our records indicate that you have one of these units. Please take the following steps at once. You should have no reluctance to perform these steps as they do not pose any hazard whatsoever. If you take these steps, you will eliminate any possibility of the shock hazard described above. In taking these steps, refer to the illustration. Disconnecting Hinge Wires 1. Remove Black Grille. 2. Unplug each plug. 3. Install Black plugs enclosed. 4. Add safety sticker to each wire. 5. Replace black grille.
Automatic Baseball Pitching Machines Warning NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE July 21, 1977 Release # 77-078 Warning Issued On Automatic Baseball Pitching Machines WASHINGTON, D.C. (July 21) -- The Consumer Product Safety Commission (CPSC) today issued an urgent warning to purchasers and users of certain automatic baseball pitching machines of the potential for severe bodily injury which the machines present. The machines are labeled as follows: "Blazer (Champ)," the "Professional," "Range, " "Pro-Trainer (Olympia)," and/or the "Dudley Automatic Pitching Machine." They were manufactured by Commercial Mechanisms, Inc., of Spring Park, Minnesota, and Kansas City, Missouri. The Commission has two reports of permanent and severe brain damage resulting from these machines. There are about 18 other injuries including brain concussions, severe lacerations and severe facial disfigurement. The Commission has authorized its staff to prepare the necessary papers for filing a complaint in U.S. District Court seeking recall of the machines and a declaration that they are an imminent hazard. About 5,000 of these machines have been distributed throughout the United States to schools, colleges, clubs, recreation departments, and other athletic organizations. They were manufactured from 1963 to 1975. The Commission is asking consumers who have access to or know the location of a machine to call tie U.S. Consumer Product Safety Commission's toll-free hotline 800/638-2772. The pitching machines have rotary pitching arms propelled by a gasoline engine or electric motor which powers a gear, pulley and tension spring mechanism. The revolving pitching arm which has no guard retains sufficient energy to "pitch" even though the machines are unplugged or disconnected. This energy can release the pitching arm after only slight vibration of the machine. The downward rotation of the pitching arm at high velocity has resulted in serious injuries to persons in its path. The pitching arm may also separate from the machine during operation, becoming an uncontrolled and potentially lethal missile. The machines may also fire pitches erratically in unintended directions. Consumers are alerted to follow these important safety precautions: Avoid placing any portion of the body within the arc or path through which the pitching arm revolves, unless the machine is disconnected from its power source and the coil spring is disengaged from the spring holder. Disengage the coil spring from the spring holder after use, and lock the machine in a location that will restrict unauthorized or unsupervised access. If the machine must be moved, disconnect the machine from its power source and disengage the coil spring from the spring holder before moving. Never store the pitching machine with the pitching arm in the 10:00 o'clock position. An Example of A Pitching Machine With An Unguarded Arm (Blazer "Little Champ" Model) Guardless
Air Humidifiers Recalled by Air Comfort NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE June 3, 1977 Release # 77-054 Recall Of Air Humidifiers Announced WASHINGTON, D.C. (June 3) -- The U.S. Consumer Product Safety Commission (CPSC), and the Air Comfort Division of the McGraw-Edison Company, Albion, Michigan, today announced the voluntary recall of one model of a console air humidifier, and one model of a combination air cleaner/humidifier. The recall involves inspecting the fan speed control. The 6,002 units of the suspect models were produced between July 1974 and July 1975. Some of these units contain a speed control which could short circuit and, under certain circumstances, could smoke or burn. The console humidifier is identified by type number 9Al5GA, serial numbers L9000001 through L9002502, and L9003501 through L9005500. The combination air cleaner/humidifier is type number 9A16RA, serial numbers L9025501 through L9025823 and L9026100 through L9027000. The identifying type and serial numbers are displayed on a rating plate located on the lower right hand corner of the rear panel of the units. McGraw-Edison has instituted a certified mail notification program aimed at reaching all dealers, distributors and known consumers of these products. This press release is issued in the interest of consumer safety to notify persons who could not be reached otherwise through customer records. The Company asks that owners of suspect models not use the products until the fan speed control is checked by factory authorized personnel. Consumers are advised to disconnect their humidifiers by unplugging the electric supply line cord from the wall socket. Free inspection and repair will be made by authorized representatives. Consumers are asked to notify the dealer where the suspect humidifiers were purchased in order to initiate the inspection and repair process, if repairs prove necessary.
Electric Defroster Recalled by Chadwick-Miller NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE March 1, 1977 Release # 77-018 CPSC And Chadwick-Miller, Inc., Announce Electric Defroster Recall WASHINGTON, D.C. (March 1) -- The U.S. Consumer Product Safety Commission (CPSC) today announced that Chadwick-Miller, Inc., Canton, Massachusetts, has voluntarily stopped sale and distribution and is recalling their electrical refrigerator defrosters. Engineering tests conducted by the Commission indicate that the product contains several possible defects capable of causing electric shock to users and/or ignition of the cord. One minor burn injury associated with this defroster has been reported to the Commission. The majority of the units were sold through mail order companies including Holiday Gifts, Foster & Gallagher, White Industries, Hanover House, Sunset House, Jay Norris and Foster Trent and retailed for approximately $5.99. Approximately 23,600 units have been sold over the last two years. The small, portable refrigerator defroster consists of a sheathed heating element housed inside a circular aluminum cage, approximately 6 l/4 inches in diameter and 3 inches deep with a 5-inch black plastic handle. The gold warning label is located on the handle stating: "Warning: Refrigerator must be checked every 2 or 3 minutes while defroster is in use. Do Not place defroster on or near plastic surfaces." The unit sits on three black plastic legs. A separate 4-foot cord set is included. The packaging box is labeled with the name Chadwick and the Model No. 73359. Consumers are urged to immediately cease use of the product. To obtain a full refund for the unit, including postage costs, mail the product to the mail order company where purchased. Consumers should not send the unit directly to Chadwick-Miller, Inc. Recall information on this product is available by calling the Consumer Product Safety Cammission's toll-free Hotline at 800/638-2772, or by contacting Chadwick-Miller, Pequot Industrial Park, 300 Turnpike Street, Canton, Massachusetts 02021, 617/828-8300.
Candles With Lead-Core Wicks Warn NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE December 10, 1976 Release # 76-086 CPSC Warns Of Potential Risk Associated With Certain Candles With Lead-Core Wicks WASHINGTON, D.C. (Dec. 10) -- The U.S. Consumer Product Safety Commission today warned consumers and religious groups that they may be subjecting themselves needlessly to airborne lead through use of candles containing lead-core wicks. The amount of lead vapor given off by such candles is small and does not, by itself, present an unreasonable health hazard, but the additional lead may present a problem for persons exposed to other sources of lead poisoning, such as older housing with lead-based paint, or in urban neighborhoods with high concentrations of automobile exhaust. The hazards of lead-poisoning are well documented, particularly in infants and young children where brain damage may result. In December 1973, the Health Research Group, a Washington, D.C.,-based public interest group, submitted a petition but at that time, the Commission found that the risk of illness was not sufficient to declare lead-wick candles an imminent hazard and ban them as the petition requested. In view of the known harmful effects of lead ingestion and the growing concern over amounts of lead in the environment from a variety of sources, the continued use of lead-core wicks in candles may be unwise. After the petition, the majority of the industry responded with a commitment to discontinue the use of lead-core wick as soon as a satisfactory substitute could be found and within the year, lead-wick candles were virtually off the market and the sole known producer of lead-core wicking discontinued its production and distribution. The Commission commends this action by the industry. However, it has recently come to the Commission's attention that three firms are producing lead-core wicking and that it is being purchased for use in candles. One firm has decided to cease production and sale of the wicking. Two other firms are continuing to produce lead-core wicking. The remaining two are the Queens Braidworks, Inc., Middle Village, Queens, New York; and the American Wick Company, North Bergen, New Jersey. The primary use for this new wicking appears to be in glass container candles and votive lights used by churches. Votive lights are in some cases burned perpetually and in large numbers. Since candles with lead wicks may continue to be available to consumers, the Commission is considering various options, including a labeling requirement so that all such candles can be identified as containing lead wicks. In the meantime, consumers can easily identify candles with lead-core wicking by a close examination of the candle wick. The lead wire running through the center can be exposed by peeling back the surrounding cotton braid. In view of the ready availability of adequate substitutes for lead wicks in candles, the Commission wishes to remind consumers and candle manufacturers of the needless, potentially harmful effects associated with their continued use.
Cotton Sportswear Tops Recalled by May Department Stores NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE May 19, 1976 Release # 76-032 CPSC Provisionally Accepts Consent Agreement With May Department Stores Company, Washington, D.C. WASHINGTON, D.C. (May 19) -- The U.S. Consumer Product Safety Commission announced today it has provisionally accepted a consent agreement with the May Department Stores Company and Arthur Emma individually and as an officer of the corporation. The consenting parties are ordered to notify all customers who may have purchased cotton sportswear tops in G. Fox and Co., a retail division of the May Company, distributed by Michael Miles/Peter Sinclair in styles MP 408, MP 409, MP 410, MP 425, MP 426, and MP 454, that the garments do not comply with the Standard for the Flammability of Clothing Textiles (CS 191-53) and may be dangerously flammable. The recall involves adult unisex shirts which were sold during the late summer and fall of 1974. The garments, described as cotton pullovers in a variety of styles, colors and designs retailed for $14 - $16. The G. Fox stores which carried these tops are all located in the Hartford, Connecticut area. Consumers who think they may have any of these garments should return them to the G. Fox store where purchased. Under the terms of the provisional consent agreement the consenting parties will be posting signs in each of the G. Fox Company stores which carried the sportswear tops advising consumers of the recall. In addition the stores will enclose in the monthly billing statements to charge account customers an illustration of the garments being recalled accompanied by a warning as to the potential flammability hazard. This same information will be included in newspaper advertisements having the greatest circulation for each store location. The consenting parties have the option of either replacing the non-complying garments with those in compliance or refunding the purchase price. This agreement is for settlement purposes only and does not constitute an admission by the company that it has violated the law. Any violation of this consent agreement by the respondents could result in the assessment of substantial civil penalties. The complaint and consent order will remain on the public record for 60 days through July 18, 1976 during which time any interested person may submit comments to the Office of the Secretary, U.S. Consumer Product Safety Commission, Washington, D.C. 20207. After considering any comments, the Commission may accept the agreement or withdraw its provisional acceptance. For additional information about this consent order, contact the Bureau of Compliance, U.S. Consumer Product Safety Commission, Washington, D.C. 20207.
Galaxy Carpet Mills Stops Sale Carpets/Rugs NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE April 22, 1976 Release # 76-026 CPSC Announces Provisional Consent Agreement With Galaxy Carpet Mills, Inc., Of Illinois WASHINGTON, D.C. (Apr. 22) -- The U.S. Consumer Product Safety Commission today announced it has provisionally accepted a consent agreement prohibiting Galaxy Carpet Mills, Inc., from marketing carpets or rugs that fail to meet standards under the Flammable Fabrics Act. The agreement stated that Galaxy of Elk Grove Village, Illinois, had produced between late 1972 and early 1973 carpet and rugs with foam backing in two styles, Polara and Laredo, that had failed tests under the Standard for Surface Flammability of Carpets and Rugs (DOC FF l-70). The Laredo carpet included 12,178 square yards in '"mist green" and "autumn leaves" color and included rolls numbered 25607 and 23763; and 5,735 yards of "exotic red" dyelot 30118, including roll number 70366. The Polara carpet included colors "oriental red" dyelot 33976, involving about 3,000 square yards, including roll number 40858, and "peacock" dyelot 37687, involving 3,288 yards including roll number 45863. A consent agreement does not constitute an admission that the company had violated a law but provides for a settlement. Any violation of the agreement by the corporation could result in the assessment of substantial civil penalties. Under the consent agreement, the manufacturer is required to notify its customers that samples of the carpets and rugs involved in the order did not pass flammability tests and to recall it for correction or destruction. Under the terms of the order, the company also agrees to stop marketing goods that do not comply with the flammability standards. The complaint and consent agreement will be subject to public review for 60 days through June 21, 1976, during which time any interested person may submit comments to the Office of the Secretary, U.S. Consumer Product Safety Commission, Washington, D.C. 20207. After considering any comments, the Commission may accept the agreement or withdraw its provisional acceptance. For additional information about the order, contact the Bureau of Compliance, U.S. Consumer Product Safety Commission, 5401 Westbard Avenue, Bethesda, Maryland 20207.
Rifle & Pistol Crossbows Recalled by WHAM-O NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE Originally issued April 12, 1976, Revised August 22, 2005 Release # 76-022 Note: Firm is out of business. Do not use these products. Please discard or destroy these products. CPSC And Wham-O Manufacturing Company Warn Of Possible Hazard In Crossbows WASHINGTON, D.C. (Apr. 12) -- The U.S. Consumer Product Safety Commission in cooperation with WHAM-O Manufacturing Company, San Gabriel, California, announced the recall of approximately 15,000 "Power- master" rifle crossbows and pistol crossbows which may pose an unreasonable risk of injury. The recall affects rifle crossbow Model Nos. 106 and 108, and pistol crossbows Model No. 718 which were manufactured between September 1, 1974, and March 25, 1976. These products, which consist of an aluminum bow positioned on a rifle-type or pistol-type mechanism, may contain a latch that was not heat treated. Once the bow has been cocked and the safety released this possible defect could cause the bow to fire prematurely. These products have been sold nationwide and are primarily intended for hunting. The rifle model retails for approximately $60; the pistol version for approximately $40. The firm is out of business and there is no longer any remedy available. Consumers who think they may have one of these products should discard or destroy them. WHAM-O had notified all retailers and distributors of these cross- bows by letter and requested that notices be posted in stores at point of sale advising customers of the possible defect. WHAM-O voluntarily reported the possible defect to the Commission in March 1976. Neither WHAM-O nor the Commission has learned of any injuries associated with the possible defect in these crossbows.
Airflow Mattress Stops manufacturing/importing Mattress NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE February 9, 1976 Release # 76-010 CPSC Provisionally Accepts Consent Agreement With Airflow Mattress, Inc., Brooklyn, New York WASHINGTON, D.C. (Feb. 9) -- The U.S. Consumer Product Safety Commission today announced that it has provisionally accepted a consent agreement prohibiting Airflow Mattress, Inc., Brooklyn, New York, a corporation, and Ralph Levine, individually and as an officer of the corporation, from manufacturing or importing products which fail to meet the requirements of the Flammable Fabrics Act. Specifically the agreement requires Airflow Mattress to conduct all flammability tests specified by the Mattress Standard (FF-4-72); to label each mattress manufactured with a permanent, accessible and legible label containing the appropriate production unit identification; and, to maintain all records required by the Standard and the Commission's regulations. Additionally as part of the provisional consent agreement, Airflow Mattress is to notify all of its customers who have purchased or to whom have been delivered mattresses manufactured by them between June 22, 1973, and December 22, 1973, that they may return these non-complying mattresses to the manufacturer for complete refund or replacement, at the option of the manufacturer, plus an allowance for reasonable costs (the means of transportation to be determined by the manufacturer). The Mattress Standard went into effect on June 22, 1973. However, a six-month "grace period" was provided during which manufacturers could attach warning labels to non-complying mattresses to indicate that they did not meet the Standard in lieu of compliance with the sampling and testing requirements. Since December 22, 1973, all newly manufactured mattresses must be produced in accordance with the sampling and testing requirements of the Standard. This agreement is for settlement purposes only and does not constitute an admission by Airflow Mattress, Inc., that it has violated the law. A future violation of this consent agreement by the company could result in the assessment of substantial civil penalties. The complaint and consent agreement will remain on the public record for 60 days through April 9, 1976, during which time any interested person may submit comments to the Office of the Secretary, U.S. Consumer Product Safety Commission, Washington, D.C. 20207. After considering any comments on the case, the Commission may finally accept the agreement or withdraw its provisional acceptance. For additional information about this consent agreement contact the Bureau of Compliance, U.S. Consumer Product Safety Commission, Washington, D.C. 20207.
Anthrax Contamination In Imported Yarn Warned by Tahki NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE February 6, 1976 Release # 76-009 CPSC Warns About Possible Anthrax Contamination In Imported Yarn WASHINGTON, D.C. (Feb. 6) -- The U.S. Consumer Product Safety Commission in cooperation with Tahki Imports, Ltd., today warned consumers that they have found balls of yarn containing animal wool or hair that may be contaminated with anthrax spores. The yarn, imported from Pakistan and distributed nationwide, utilizes animal and a combination of animal and synthetic materials and retails for between $4 and $7 per ball, and has been imported by Tahki Imports, Ltd., Teaneck, New Jersey, from Safraz Brothers, Lahore, Pakistan. The types of yarn include: 100% camel hair, white goats hair/ camel hair, gray goats hair/camel hair, black goats hair/camel hair, 2-ply wool, goats hair/wool, and rayon/wool. The contaminated balls have a label which says "Tahki Imports, Ltd., imported from Pakistan." According to Commission investigators, the contaminated yarn appeared to have been offered for sale through many retail outlets over the last year. Consumers who own this yarn should seal the yarn or products made from it in an airtight double plastic bag and call a local or state health department for disposal instructions. Consumers should not attempt to sterilize the yarn, incinerate it, or throw it away because of the risk of further contamination. Anthrax is an acute bacterial disease which can be fatal for humans if untreated. It can be transmitted from a product bearing the anthrax spores mainly through skin contact and in rare circumstances through inhalation. Anthrax infection is-not contagious from one person to another. While risk of dangerous human infection is low, the disease can be quite serious. The disease may start with a blister and can develop into a depressed area of dead tissue with a dark crust. Fever and other symptoms may not appear until the disease is severe. This warning is being issued in the interest of the public health and safety and in conjunction with the Center for Disease Control, Atlanta, Georgia. The Commission is continuing its investigations to determine whether the contaminated yarn has been sold to other importers. For further information contact the Consumer Product Safety Commission toll-free hotline at 800/638-2772.
Jorges Carpet Mills Stops Sale Carpets NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE February 5, 1976 Release # 76-006 CPSC Announces Provisional Consent Agreement With Jorges Carpet Mills, Inc., Rossville, Georgia WASHINGTON, D.C. (Feb. 5) -- The U.S. Consumer Product Safety Commission today announced a provisional consent agreement that prohibits a Georgia carpet firm from marketing carpet that fails to meet the standards of the Flammable Fabrics Act. The order involves Jorges Carpet Mills, Inc., Rossville, Georgia, which produced a nylon shag carpet with jute back that failed to meet a flammability standard developed in 1971 (IX FF l-70). The carpet was marketed as style 087, "Magic Affair," and produced in varying colors. Sold in 12 foot rolls or as rugs, it made up about one percent of the total production. Customers who may have purchased the "Magic Affair" style carpet should contact the place of business where it was purchased to determine if it is carpet that failed the standard. A consent agreement does not constitute an admission that the company had violated a law but it provides for a settlement. Any violation of this consent agreement by the corporation could result in the assessment of substantial civil penalties. Under the consent order, the company agrees to stop marketing goods that do not comply with the flammability standard and to notify purchasers of substandard goods in order to recall the defective items for correction or destruction. The complaint and consent order will be subject to public review for 60 days through April 5, 1976, during which time any interested party may submit comments to the Office of the Secretary, U.S. Consumer Product Safety Commission, Washington, D.C. 20207. After considering any comments, the Commission may accept the agreement or withdraw its provisional acceptance. For additional information about the order, contact the Bureau of Compliance, U.S. Consumer Product Safety Commission, 5401 Westbard Avenue, Bethesda, Maryland 20207.
Carpets & Rugs Recalled by Hartford Carpet Mills NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE May 19, 1975 Release # 75-040 CPSC Provisionally Accepts Consent Order With Hartford Carpet Mills, Inc. WASHINGTON, D.C. (May 19, 1975) -- The U.S. Consumer Product Safety Commission today provisionally accepted a consent order signed by Hartford Carpet Mills, Inc. requiring that company to recall certain carpets and rugs which fail to meet Federal flammability standards. (DOC F l-70). Non-complying goods were previously pulled from inventory and the distribution chain. The carpets and rugs in style "Carmel", also sold under the names "Sierra" and "Hartley", were manufactured between April 16, 1971, and October, 1971. Also involved in the recall are carpets and rugs in the same style in colors Autumn Bronze and Harvest Beige, manufactured between May 1, 1972, and June 30, 1972. The style "Carmel" carpet is composed of 100 percent nylon pile and has a jute back. It comes in various colors, is shaggy in nature and is sold in varying lengths. A Commission spokesman said that any remaining carpeting and rugs involved in the recall, sold nationwide, are probably in the homes of consumers. Consumers who feel they may have such carpets or rugs in their homes should contact Hartford Carpet Mills, Inc., 2913 Eighth Avenue, Chattanooga, Tennessee 37407 (615-624-0981). The consent order, signed by Hartford Carpet Mills, Inc. and Nolan D. Helms, Officer of the Corporation, requires the company to notify all purchasers and either process the carpets and rugs to bring them into compliance with the standard, or destroy them. By signing the consent agreement, the company also agrees not to violate Federal flammability standards in the future. This action is voluntary and does not constitute an admission of guilt by the company. A violation of the consent order could result in civil penalties up to $5,000 per violation. The complaint and consent order will remain on the public record for comment through July 18, 1975. Interested persons may submit comments to the Office of the Secretary, U.S. Consumer Product Safety Commission, 1750 K Street, N.W., Washington, D. C. 20207. After reviewing any comments, the Commission will decide whether to accept the agreement or withdraw its provisional acceptance. Further information on this consent order may be obtained through the Bureau of Compliance, U.S. Consumer Product Safety Commission, Washington, D.C. 20207.