Loading...
Loading...
All product recalls associated with BENDIX.
Total Recalls
19
Past Year
4
Class I (Serious)
0
Most Recent
Nov 2025
Data from FDA, USDA, CPSC, and NHTSA public records. Recall counts vary by company size, industry, and reporting practices. Always check official sources for current information.
Mack Trucks, Inc. (Mack) is recalling certain Bendix EC80 Advanced Electronic Control Units (ECU) part numbers K190048 and K163499. Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop working.
Volvo Trucks North America (Volvo Trucks) is recalling certain Bendix EC80 Advanced Electronic Control Units (ECU) part numbers K163499 and K190048. Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop working.
Bendix Commercial Vehicle Systems, LLC (Bendix) is recalling certain Bendix EC80 Advanced Electronic Control Units (ECU) part numbers K219877SC001, K219876SC001, K212565SC001, K168425SC000, K168424SC000, K168128R000, K168122R000, K271501R000, K271500R000, K16849SC000, K168421SC000, K168422SC000, K168423SC000, K209617SC000, K209615SC000, K212562SC000, and K212563SC000. Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop working.
Bendix Commercial Vehicle Systems, LLC (Bendix) is recalling certain Knorr-Bresme 22/24-57 brake chambers, with part number K068622 and K038830N00, sold as replacement parts for certain buses. The brake chamber may have been improperly manufactured, which can result in an air leak.
Bendix Commercial Vehicle Systems, LLC (Bendix) is recalling certain Bendix EC80 Advanced Electronic Control Units (ECU) part numbers K168135, K163400, K168122, K168123, K168128, K168129, K179860, K203871, K220313, K163402, K163124, K168136, K210927, K210928, K210929, K219871, K219872, K219874, K220316, K168124, K194487, K194492, K211945, K211946, K212554, K212555, K250369, K250374, K271500, and K271501. Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop working.
Bendix Commercial Vehicle Systems, LLC (Bendix) is recalling certain Intellipark Park Valve Modules (PVM) with part numbers, K266604R000, K189349, K273523R000 and, K273520R000. The rubber ball seal in the PVM may fracture and cause a leak, which can result in park brake failure or unexpected park brake engagement while driving.
Bendix Commercial Vehicle Systems LLC (Bendix) is recalling certain Intellipark Towing Park Brake Modules (PVM) with part number, K206667R000. The PVM may become stuck and fail to move into the park position when the park switch is activated.
Bendix Commercial Vehicle Systems LLC (Bendix) is recalling certain Foot Brake Valve Assemblies, model Medium-Duty Vehicle Pedal A, with part number G901288. When the brake pedal is fully applied and then released rapidly, the pedal plunger that connects the brake pedal to the brake valve may become disconnected, causing the brakes to fail.
Bendix Commercial Vehicle Systems, LLC (Bendix) is recalling certain Brake Lights, Model DCM-BB and part number 10049991. The connection between the brake pedal and brake light switch may bind, causing the brake lights to illuminate continuously, or fail to illuminate when the brake is applied.
Bendix Commercial Vehicle Systems, LLC (Bendix) is recalling certain Intellipark Dash Electronic Control Units (DECU) with part number K183042R000. The DECU may fail to activate the parking brake, causing the vehicle to unintentionally move.
Bendix Commercial Vehicle Systems, LLC (Bendix) is recalling certain SC-3 Single Check Valves, part number K094964. The retainer may not be properly seated in the retainer groove, causing an air leak within the brake system. As such, these check valves fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."
Bendix Commercial Vehicle Systems, LLC (Bendix) is recalling certain SL-4 Brake Light Pressure switches with part numbers K101993, K101996, K108141, and K108142 manufactured between December 1, 2019 and January 31, 2020. When air pressure is supplied to the brake light switch it may leak, possibly causing the internal electrical contacts to become jammed.
Oshkosh Corporation (Oshkosh) is recalling certain Bendix Pressure Switches, part number 4133101, sold as aftermarket parts. The plastic threads holding the two halves of the pressure switch may strip when the switch is pressurized, resulting in an air leak which, if severe enough, can cause the air system to lose pressure when the brakes are applied. Failure of the front and rear brake switches will also result in a loss of brake light functionality.
Bendix Commercial Vehicle Systems LLC (Bendix) is recalling certain ADB22X Air Disc Brake Calipers sold for use on school buses. The driver side rear brakes may drag.
Bendix Commercial Vehicle Systems LLC (Bendix) is recalling certain SR-5 Trailer Spring Brake Valves manufactured January 1, 2014, to March 4, 2016. These brake valves were improperly machined without a radius on the internal check valve seat, causing a delay of application of the spring brakes while parking.
Bendix Commercial Vehicle Systems LLC (Bendix) is recalling certain TR-3 Inversion Air Brake Valves, part number 101450, manufactured February 6, 2014, to October 15, 2014. The bodies of the affected inversion valves may have incorrect dimensions, possibly causing the brakes to drag and overheat.
BENDIX COMMERCIAL VEHICLE SYSTEMS, LLC (BENDIX) IS RECALLING CERTAIN BRAKE VALVES, TREADLE ASSEMBLIES, AND/OR PLUNGER KITS SOLD AS AFTERMARKET REPLACEMENT EQUIPMENT AND SOLD AND INSTALLED AS ORIGINAL EQUIPMENT TO VARIOUS VEHICLE MANUFACTURERS. THE BRAKE VALVE PLUNGER MAY FRACTURE DURING BRAKE APPLICATION, RESULTING IN REDUCED BRAKE PEDAL ANGLE AND TRAVEL. THIS CONDITION MAY LIMIT THE DRIVERS ABILITY TO DELIVER FULL PRESSURE FROM THE FOOT BRAKE VALVE. THERE IS ALSO A POTENTIAL THAT THE BRAKE PLUNGER COULD BECOME LODGED AND NOT ALLOW RELEASE OF THE SERVICE BRAKES.
BENDIX IS RECALLING CERTAIN ATR-6 TRACTION RELAY VALVES PRODUCED FROM DECEMBER 2, 2010, THROUGH JANUARY 18, 2012. THE VALVES WERE SOLD AS AFTERMARKET SERVICE PARTS AND INSTALLED AS ORIGINAL EQUIPMENT BY VARIOUS VEHICLE MANUFACTURERS. DUE TO A DESIGN MODIFICATION, IN EXTREMELY COLD CONDITIONS, INTERNAL LEAKAGE CAN POTENTIALLY DEVELOP, RESULTING IN PRESSURE BEING DELIVERED TO THE AFFECTED SERVICE BRAKE CIRCUIT.
BENDIX IS RECALLING CERTAIN GUNITE AUTOMATIC SLACK ADJUSTERS MANUFACTURED FROM OCTOBER 15, 2010, THROUGH JANUARY 31, 2011, REPACKAGED AS BENDIX BRAND, PART NUMBERS 974294, 974296, 977142, AND 977143, AND SOLD FOR USE AS AFTERMARKET EQUIPMENT TO PACCAR PARTS DISTRIBUTORS. ONE SLACK ADJUSTER WAS SOLD TO A MACK DISTRIBUTOR. DUE TO AN INCOMPLETE "KNITTING" OF THE IRON AT THE TIME OF CASTING, INADEQUATE STRUCTURAL INTEGRITY OF THE SLACK ADJUSTER HOUSING CAN OCCUR, WHICH COULD CAUSE THE HOUSING TO BREAK AT THE HANDLE UNDER NORMAL OPERATING LOADS.