Loading...
Loading...
All product recalls associated with BRAUNABILITY.
Total Recalls
112
Past Year
36
Class I (Serious)
3
Most Recent
Oct 2025
Data from FDA, USDA, CPSC, and NHTSA public records. Recall counts vary by company size, industry, and reporting practices. Always check official sources for current information.
On July 20, 2018 Braun Corporation (Braun) filed a recall for certain 2017-2018 BraunAbility Dodge Side Entry Vans with a manual in-floor wheelchair ramp built on Dodge RT minivan chassis. The brake lines may not be connected to the corresponding ports on the hydraulic control unit, causing reduced performance of the electronic stability control (ESC) system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 135, "Light Vehicle Brake Systems," and 126, "Electronic Stability Control Systems." On August 21, 2018, Braun expanded this recall to include an additional 31,165 vehicles. Included in this update are 2012-2016 BraunAbility Dodge Side Entry Vans and 2012-2018 Chrysler Town and Country Side Entry Vans.
Braun Corporation (Braun) is recalling certain model year 2016 BraunAbility MXV wheelchair accessible conversion vehicles built on Ford Explorer chassis. If the driver or front passenger seat is moved to its most rearward position, the seat position sensor may be dislodged, preventing the air bag control unit from accurately calculating the frontal air bag deployment force needed in the event of a crash.
Braun Corporation (Braun) is recalling certain model year 2016 MXV vehicles manufactured February 8, 2016, to June 23, 2016 and built on a Ford Explorer chassis. The passenger seat electrical harness may be incorrectly routed and can be crushed between the seat structure and the seat riser manufactured as part of the wheelchair accessible conversion.
Braun Corporation (Braun) is recalling certain model year 2013-2015 Braun-modified Chrysler and Dodge vehicles manufactured December 19, 2012, to May 5, 2015. The affected vehicles have certification labels that may have incorrect gross vehicle weight rating (GVWR) information, and front and rear gross axle weight rating (GAWR) information printed on the Certification labels. As such, these vehicles fail to comply with the requirements of 49 CFR Part 567, "Certification."
Braun is recalling certain model year 2008-2013 Vision Rear Entry mobility conversion vehicles built on Dodge and Chrysler minivan chassis from December 20, 2012, through March 21, 2013. The track bar mount assemblies were not properly welded during manufacturing. One or more welds are missing from the track bar which could result in separation from the rear axle.
Braun is recalling certain model year 2011-2013 Rampvan vehicles manufactured from May 8, 2012, through January 3, 2013. Braun Rampvans are Toyota Sienna minivans that have been modified for special use. The Braun-specific toe pan panel comes in close proximity to the accelerator pedal lever. There could be an interference of the toe panel pan and the accelerator pedal lever.
Braun is recalling certain model year 2012 Entervan vehicles equipped with aftermarket seat covers, part numbers E51815K-D90-11 and E51817K-11, manufactured from February 28, 2012, through September 21, 2012. The seat covers may have been incorrectly installed with the driver seat cover on the passenger seat and vice versa and will have an 'SRS AIRBAG' label located on the inboard seat bolster.
BRAUN IS RECALLING CERTAIN CENTURY-2 AND VISTA-2 WHEELCHAIR LIFTS MANUFACTURED FROM NOVEMBER 20, 2006, THROUGH SEPTEMBER 10, 2010, INSTALLED AS AFTERMARKET EQUIPMENT ON VARIOUS VANS AND TRANSIT BUSES. ON OCTOBER 8, 2012, BRAUN FILED AN AMENDED DEFECT INFORMATION REPORT TO INCLUDE MODEL YEAR 2008 THROUGH 2011 BRAUN-MODIFIED FORD E-350 PARATRANSIT VANS. OVER TIME AND WITH FREQUENT USE, THE ROLL STOP LATCHES ON THE OUTER BARRIER MAY BECOME BENT OR MISALIGNED.
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2008 AND 2009 DODGE GRAND CARAVAN AND CHRYSLER TOWN & COUNTRY PASSENGER VEHICLES MANUFACTURED FROM FEBRUARY 2007 THROUGH SEPTEMBER 2009. SOME OF THE VEHICLES MAY HAVE BEEN BUILT WITH AN IMPROPERLY ROUTED WIRE HARNESS THAT MAY HAVE A CONDITION WHERE THE LOWER SLIDING DOOR HINGE BRACKET CAN MAKE CONTACT AND WEAR THROUGH THE WIRE INSULATION.
THE BRAUN CORPORATION IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2010 CHRYSLER TOWN & COUNTRY AND DODGE CARAVAN COMMERCIAL ENTERVANS WHICH WERE ALTERED BY BRAUN BETWEEN JANUARY 21, 2009 AND MARCH 19, 2010. DURING CONVERSION, THE CHASSIS WAS RAISED AND THE FLOOR WAS LOWERED TO ACCOMMODATE WHEELCHAIR ACCESSIBILITY FEATURES. IN RAISING THE CHASSIS, THE FUEL FILL PIPE COMES INTO CLOSER PROXIMITY TO THE LEFT REAR TIRE. IN ROUGH OR AGGRESSIVE DRIVING SITUATIONS, THE TIRE MAY INTERMITTENTLY CONTACT THE FUEL FILL PIPE.
January 2, 1996 Release # 96-057 Washington, D.C. - CPSC, Braun Inc. of Lynnfield, Mass., is voluntarily announcing a recall of and replacement filter holder for 5,000 espresso/cappuccino makers, models e20 and e25, type 3058. If the filter holder is pushed past the maximum setting, the filter holder may dislodge under pressure. As a result, it could break the glass coffee carafe and consumers could be cut by broken glass. In addition, consumers could be burned by escaping steam or spilled coffee grounds.Braun has received 16 reports of the filter holder dislodging, which resulted in three injuries, including a cut and burns.The plastic and metal espresso/cappuccino makers have a production code stamped on the bottom of the base. This voluntary corrective action involves espresso/cappuccino makers with production codes "426" through "450." The machine was packaged in a cardboard box labeled in part "Braun Espresso/Cappuccino Maker ... Made in switzerland." Major department stores, kitchen supply stores and various retailers sold the espresso/cappuccino makers nationwide from August 1994 through December 1994 for between $49 and $69.Braun is providing replacement filter holders, revised instruction sheets, and product labels to consumers who own type 3058 espresso/cappuccino makers with production codes "426" through "450." For more information, consumers can call (800) 933-8363, twenty-four hours a day, seven days a week. Consumers should have their espresso/espresso makers available at the time of the call
August 17, 1992 Release # 92-129 Braun Issues Safety Notice Concerning Its Espresso Master E200T And E260T PRODUCT: Braun models E200T and E260T espresso/capuccino makers distributed nationwide from November 1990 through July 1992. PROBLEM: If the espresso/capuccino makers' filter holders are not properly and firmly positioned, they may dislodge under pressure and release steam, coffee grounds, and, under some circumstances, break the glass carafes below. Consumers, as a result may receive burns or other personal injuries. WHAT TO DO: Braun is offering written notices and labels to put on the espresso/capuccino makers. The notices and labels serve as guides for proper positioning of the filter holder handle. For a free notice and label, call 1-800-272-8610. WASHINGTON, DC -- In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Braun, Inc. of Lynnfield, MA, is voluntarily issuing an important safety warning regarding its E200T and E260T four cup espresso/cappuccino makers. If the filter holder is not properly and firmly positioned, it may dislodge under pressure and release steam, coffee grounds, and, under some circumstances, break the glass carafe below. Consumers may receive burns or other personal injuries as a result.CPSC was informed of this potentially unsafe situation by Braun as a result of 52 consumer reports, including 13 injuries. Injuries reported included cuts, scratches, and burns. Models E200T and E260T Braun Espresso Masters were distributed nationwide between November 1990 and July 1992.Written notification of the potential hazard is being sent to consumers who returned warranty registration cards. Retail stores where the products were sold are also being notified. Each consumer will be provided a written notice and label to put on each espresso maker. The company asks that the labels be affixed to the espresso maker as a guide for properpositioning of the filter holder handle to prevent further incidents. The important safety notice and labels may be obtained free by calling 1-800-272-8610.CPSC is announcing this warning as part of its mission to protect the public from unreasonable risks of injury and death associated with consumer products. The Commission's objective is to help reduce the estimated 28.5 million injuries and 21,600 deaths that occur each year from the 15,000 different types of consumer products within CPSC'S jurisdiction