DeWALT Industrial Tool Company, of Towson, Md. Recalls

All product recalls associated with DeWALT Industrial Tool Company, of Towson, Md..

Get alerts for this brand

Recall Summary

Total Recalls

8

Past Year

0

Class I (Serious)

0

Most Recent

Feb 2019

Data from FDA, USDA, CPSC, and NHTSA public records. Recall counts vary by company size, industry, and reporting practices. Always check official sources for current information.

Showing 1–8 of 8 recalls

Drills (DeWALT) – shock hazard (2019)

This recall involves the DeWALT DWD110 and DWD112 3/8-inch variable speed reversing drills. The drills are yellow with black accents and have a power cable connected at one end. Only drills with date codes 2017-37-FY through 2018-22-FY are affected. If the drill is marked with an "X" after the date code it has already been inspected and is not affected. The model number is located on a label on the right side of the drill. The date code is etched into the body of the drill below the label. Consumers whose drill does not have a date code, or who cannot locate the date code should contact the company. Product Name UPC DeWALT DWD110 885911037518 DeWALT DWD112 885911057319

CPSCFeb 5, 2019Nationwide• DeWALT Industrial Tool Company, of Towson, Md.

Cordless Brad Nailers (DEWALT) - Injury Hazard (2008)

This recall involves the DEWALT DC608 18-Volt Cordless 2" 18-Gauge Straight Brad Nailer with date codes 200728 through 200821. "DC608" is located on the right side of the magazine. The date code can be found on the underside of the handle, once the battery pack is removed. Units stamped with an "M" following the date code are not included in this recall.

CPSCAug 5, 2008Nationwide• DEWALT Industrial Tool Co., of Towson, Md.

DEWALT Table Saws – Laceration Risk (2008)

Laceration Risk

This recall involves the 10-inch DEWALT jobsite table saw model number DW744. Date codes included in the recall are 200715 through 200740. The table saws are yellow and black. The model number and date code are located on the name plate on the front of the saw. Table saws with an "X" stamped on the name plate by the date code are not included in this recall.

CPSCApr 29, 2008Nationwide• DEWALT Industrial Tool Co., of Towson, Md.

Cordless Drills (DEWALT) – Fire Risk (2007)

Fire/Burn Risk

This recall involves DEWALT individual cordless drills listed below: Model Number Description Date Codes DC920 Heavy-Duty XRP™ 1/2" (13mm) 18 Volt Cordless Drill/Driver 200723 through 200742 DC930 Heavy-Duty XRP™ 1/2" (13mm) 14.4 Volt Cordless Drill/Driver 200625 through 200746 DC935 Heavy-Duty XRP™ 1/2" (13mm) 14.4 Volt Cordless Hammerdrill/Drill/Driver 200627 through 200746 DC936 Heavy-Duty XRP™ 1/2" (13mm) 14.4 Volt Cordless Hammerdrill/Drill/Driver 200635 through 200746 DC940 Heavy-Duty XRP™ 1/2" (13mm) 12 Volt Cordless Drill/Driver 200635 through 200746 The model number is printed on a sticker on the side of the unit. The date code is embossed on the bottom of the unit. Units stamped with an "M" following the date code have been repaired and are not included in this recall. The packaging of repaired drills has a green dot sticker near the UPC label.

CPSCDec 20, 2007Nationwide• DEWALT Industrial Tool Company, of Towson, Md.

Portable Generators (DEWALT) – Electric Shock Risk (2007)

The recall involves DEWALT DG2900 2900-watt gasoline-powered generators with date codes 200150 through 200635. The generators are black and yellow. "DEWALT" and "DG2900" are printed on the generator. The date code is stamped on the right side of the unit on the black plastic covering the rear of the control panel. Units with an "R" stamped on the name plate are not affected by this recall.

CPSCJan 4, 2007Nationwide• DEWALT Industrial Tool Co., of Towson, Md.

Reciprocating Saws (DEWALT) – Fire Hazard (2006)

Fire/Burn Risk

This recall involves cordless DEWALT DC305 model reciprocating saws with date codes 200601-49 through 200640-49. They are yellow and black and about 18 inches long. The model number is located on the name plate on the side of the housing and the date code is located under the handle where the battery is inserted.

CPSCDec 21, 2006Nationwide• DEWALT Industrial Tool Co., of Towson, Md.

Cut-Out Tools (DEWALT) – Shock Hazard (2006)

Laceration Risk

These DEWALT cut-out tools are yellow and black, and have model number DW660 written on their nameplate, which is located on the body of the unit. The recalled tools were manufactured between January 2006 and September 2006, and have date codes ranging from 200601 to 200639. The date code also is located on the tool's nameplate. Units with a "V" stamped on the nameplate are not included in this recall.

CPSCDec 21, 2006Nationwide• DEWALT Industrial Tool Co., of Towson, Md.

DeWalt Framing and Circular Saws – Laceration Risk (2006)

Laceration Risk

This recall involves DeWalt DW378G and DW378GT 7 ¼-inch framing saws with date codes 200301-49 through 200637-49. The model numbers for the framing saws are located on the side of the housing. The date code is located either on the name plate or under the handle near the power cord exit. Circular saws involved in this recall have model number DC300 with date codes 200601-49 through 200637-49. The model number on the circular saw is located on the name plate on the top of the motor housing. The date code on the circular saw is located on the underside of the motor housing. Framing saws marked with a "V" on the underside of the handle near the cord set and circular saws marked with a "V" on the underside of the motor housing or under the handle where the battery is inserted have already been repaired and are not involved in this recall.

CPSCNov 8, 2006Nationwide• DeWalt Industrial Tool Co., of Towson, Md.

Stay Informed

DeWALT Industrial Tool Company, of Towson, Md. Recalls

Recall Summary

Drills (DeWALT) – shock hazard (2019)

Cordless Brad Nailers (DEWALT) - Injury Hazard (2008)

DEWALT Table Saws – Laceration Risk (2008)

Cordless Drills (DEWALT) – Fire Risk (2007)

Portable Generators (DEWALT) – Electric Shock Risk (2007)

Reciprocating Saws (DEWALT) – Fire Hazard (2006)

Cut-Out Tools (DEWALT) – Shock Hazard (2006)

DeWalt Framing and Circular Saws – Laceration Risk (2006)