Loading...
Loading...
All product recalls associated with DIAMOND COACH.
Total Recalls
10
Past Year
1
Class I (Serious)
0
Most Recent
Dec 2025
Data from FDA, USDA, CPSC, and NHTSA public records. Recall counts vary by company size, industry, and reporting practices. Always check official sources for current information.
Diamond Coach Corporation (Diamond Coach) is recalling certain 2025 VIP buses equipped with QRT-Deluxe and QRT-Max wheelchair restraints. The retractors may not lock, preventing the wheelchair from being properly secured.
Diamond Coach Corporation (Diamond Coach) is recalling certain 2023-2024 VIP 2200 transit buses, equipped with certain GO-ES Space Saver Foldaway Seats. The recliner mechanism may not engage when the seat back is fully reclined. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 210, "Seat Belt Assembly Anchorages."
Diamond Coach Corporation (Diamond Coach) is recalling one 2017 VIP 2800 vehicle equipped with an ASA Electronics Voyager monitor used to display the back-up camera image. This display may unexpectedly revert back to the factory default settings which may cause the camera image to be reversed.
Diamond Coach Corporation (Diamond Coach) is recalling certain 2018 Transit MPV/VTUM and 2018 PT 2000 transit buses equipped with Freedman GO-ES Foldaway Seats. When the back seat cushion is rotated from the stowed position to the upright position, the seat cushion may not remain locked into place when under load, such as in a crash or a sudden stop. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 207, "Seating Systems," and number 210, "Seat Belt Assembly Anchorages."
Diamond Coach Corporation (Diamond) is recalling certain model year 2006-2011 VIP and PT 2000, 2200, 2500, 2800, 3200, and 3201 transit buses manufactured January 1, 2006, to December 31, 2011, and equipped with certain Ricon model S2010 and S5510 wheelchair lifts. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.
Diamond Coach Corporation (Diamond) is recalling certain model year 2006-2011 VIP and PT 2000, 2200, 2500, 2800, 3200, and 3201 transit buses manufactured January 1, 2006, to December 31, 2011, equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation. The platform side plate of the affected wheelchair lifts may crack.
DIAMOND COACH CORPORATION (DIAMOND COACH) IS RECALLING CERTAIN MODEL YEAR 2008-2010 PT AND VIP BUSES EQUIPPED WITH BRAUN CENTURY-2 AND VISTA-2 WHEELCHAIR LIFTS. OVER TIME, AND WITH FREQUENT USE, THE ROLL STOP LATCHES ON THE WHEELCHAIR LIFTS OUTER BARRIER MAY BECOME BENT OR MISALIGNED.
DIAMOND COACH IS RECALLING CERTAIN MODEL YEAR 2006-2010 BUSES MANUFACTURED FROM JANUARY 1, 2006 THROUGH DECEMBER 31, 2010, AND EQUIPPED WITH CARRIER GENV EM-1 EVAPORATOR UNITS. DUE TO TIME, TEMPERATURE, AND/OR VIBRATION, THE FUSE MAY LOOSEN IN THE FUSE HOLDER RESULTING IN HIGH RESISTANCE AND ARCING.
DIAMOND COACH HAS NOTIFIED NHTSA ABOUT A DEFECT IN CERTAIN MODEL YEAR 2007-2009 VIP COACHES FITTED WITH RICON PUBLIC USE LIFTS MANUFACTURED BETWEEN DECEMBER 1, 2007 TO DECEMBER 18, 2009. THE RESTRAINT BELT ON THESE LIFTS WAS DESIGNED TO PREVENT THE LIFT FROM MOVING, UNLESS THE TONGUE OF THE BELT IS FULLY ENGAGED AND LATCHED IN THE BUCKLE. RICON HAS DISCOVERED, HOWEVER, THAT IT IS POSSIBLE FOR THE OPERATOR TO INSERT THE BELT TONGUE INTO THE BUCKLE WITHOUT FULLY ENGAGING THE LATCHING MECHANISM. IN THIS CASE, THE RESTRAINT BELT WOULD APPEAR TO BE LATCHED, AND THE OPERATOR COULD RUN THE LIFT. IF THE RESTRAINT BELT TONGUE IS NOT FULLY ENGAGED INTO THE RESTRAINT BELT BUCKLE, AND LATCHED, THE LIFT MAY OPERATE WITH AN OCCUPANT ON THE PLATFORM.
DIAMOND COACH HAS NOTIFIED NHTSA ABOUT A DEFECT IN CERTAIN MODEL YEAR 2009 VIP MODEL COACHES MANUFACTURED BETWEEN MAY 1 AND DECEMBER 1, 2009, EQUIPPED WITH CERTAIN RICON S SERIES AND K SERIES L-MODEL WHEELCHAIR LIFTS, DUE TO A PROBLEM IN THE SOFTWARE THAT CONTROLS THE LIFT'S "UP" FUNCTION. IF THE "UP" SWITCH IS RELEASED BEFORE THE FLOOR LEVEL LIMIT SWITCH IS ACTIVATED, THE LIFT MAY CONTINUE ITS UPWARD TRAVEL FOR APPROXIMATELY 1 SECOND BEFORE STOPPING. THE CONTINUED UPWARD TRAVEL MAY OVERRUN THE FLOOR LEVEL CUT OFF POINT.