Loading...
Loading...
All product recalls associated with ELGIN.
Total Recalls
16
Past Year
0
Class I (Serious)
0
Most Recent
Sep 2024
Data from FDA, USDA, CPSC, and NHTSA public records. Recall counts vary by company size, industry, and reporting practices. Always check official sources for current information.
Elgin Sweeper Company, Inc. (Elgin Sweeper) is recalling certain 2023-2024 Broom Badger street sweepers. The fuel system may allow the tank to be overfilled, which can cause a fuel leak.
Fontaine Modification (Fontaine) is recalling certain Fontaine-modified 2020-2023 Elgin Crosswind 1 and Elgin Whirlwind 1 sweepers built on Peterbilt 220 chassis. The engine air compressor stainless steel braided supply line may rub through the oil suction tube running from the Variable Power Divider (VPD) sump to the hydrostatic pump, causing the pump to fail.
Elgin Sweeper Company, Inc. (Elgin Sweeper) is recalling certain 2018-2022 RegenX vehicles. The fan assembly mounting bolts may have been improperly tightened.
Elgin Sweeper Company Inc. (Elgin) is recalling certain 2015-2018 Elgin Broom Bear, Crosswind, Eagle, Road Wizard, and Whirl Wind street sweepers. The T-fitting installed on the air brake system may fail, causing air to leak, potentially resulting in the parking brake applying unexpectedly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 106, "Brake Hoses."
Elgin Sweeper Company Inc. (Elgin) is recalling certain 2017 Crosswind street sweepers. Debris may collect under the cab area and contact the exhaust system.
Elgin Sweeper Company Inc. (Elgin) is recalling certain 2016-2017 Eagle-F, Broom Bear-H, and Road Wizard street sweepers. The main broom flap support end cap may detach from the sweeper.
Elgin Sweeper Company Inc. (Elgin) is recalling certain model year 2009-2015 Megawind MX vehicles manufactured January 1, 2009, to February 4, 2015. The affected street sweepers have boom mounting pins that may lose their retaining pins, allowing the mounting pins to move out of position and the boom to move.
Elgin Sweeper Company Inc. (Elgin) is recalling certain model year 2014 Elgin Eagle 4MF, and Road Wizard 4MW street sweepers manufactured October 3, 2014, to November 26, 2014. Due to the routing, the battery and the alternator wires may conduct higher current than designed, resulting in wire failure and charging system loss.
Elgin Sweeper Company Inc. (Elgin) is recalling certain model year 2012-2014 Broom Badger sweeper trucks manufactured March 1, 2013, to October 1, 2014. The affected vehicles are equipped with a modification hydraulic oil cooler fan wiring harness. The oil cooler fan may fail and cause overheating.
Elgin Sweeper Company (Elgin) is recalling certain model year 2013 Pelican street sweepers equipped with IMMI-brand L9 seat belt buckles. When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 209, "Seat Belt Assemblies."
Elgin Sweeper Company Inc. (Elgin) is recalling certain model year 2006-2012 Crosswind J Alternative Fuel street sweepers, serial numbers J3285, J3260D, J3261D, J3300D, J3367, J3368D, J3370D, J3385D, J3424D, J3426D, J3453D, J3472D, and J3513D. Extended use of the auxiliary hydraulic pump may cause it to overheat and fail.
This recall involves 28 different models of ceiling flush-mounted light fixtures manufactured between June 1, 2010 through November 25, 2010 with a diameter ranging from 7.5" to 13". All affected fixtures have a round base or canopy affixed to the ceiling and a dome- or cylindrical-shaped cover. The recalled fixtures have a variety of finishes including metal and/or clear or frosted glass and contain one, two or three light bulbs. Canopies are a range of colors including white, bronze, brass (gold) and nickel. Most models have a nib in the center of the dome cover in the same color as the canopy. Although the manufacturer's name, the fixture model number and production date can be found on a printed label on the ceiling-side of the fixture's metal canopy, consumers are advised not to remove the metal canopy from the ceiling in order to access this label.
ELGIN SWEEPER IS RECALLING CERTAIN MODEL YEAR MODEL 2010-2011 MEGAWIND SWEEPERS WITH TIER- III JOHN DEERE AUXILIARY ENGINES MANUFACTURED FROM FEBRUARY 2010 THROUGH APRIL 2011. UNDER HEAVY OPERATING CONDITIONS AND HIGH AUXILIARY ENGINE SPEED, THE FANS MAY FAIL AND THE FAN BLADES COULD SEPARATE FROM THE BASE OF THE FAN AND THE BLADES OR DEBRIS FROM THE BLADES COULD LEAVE THE FAN HOUSING.
ELGIN SWEEPER IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2010 BROOM BEAR STREET SWEEPERS, MOUNTED IN INTERNATIONAL 4300 CHASSIS ONLY, MANUFACTURED FROM MAY 2007 THROUGH MARCH 2010. THE CHASSIS SUSPENSION REAR CONTROL ARMS AND TOWER MAY NOT HAVE BEEN PROPERLY WELDED TO SPECIFICATION.
The recall includes Performax model number 90206 and Wilton model number 34570 10-inch sliding miter saws with date code/serial numbers ranging from W062505 to W070405. The model, date code/serial numbers are printed on a black label on the motor housing of the saw.
The recall involves all Wilton-brand, 10-inch Compound Mitre Saws, including models with the Laser Line feature with model numbers 99164 and 99192. The model number is written on a black label on the motor housing.