Loading...
Loading...
All product recalls associated with HEIL.
Total Recalls
12
Past Year
5
Class I (Serious)
0
Most Recent
Oct 2025
Data from FDA, USDA, CPSC, and NHTSA public records. Recall counts vary by company size, industry, and reporting practices. Always check official sources for current information.
The Heil Co. (Heil) is recalling certain 2023-2025 side loader garbage trucks equipped with certain Agility Fuel Solutions CNG Fuel Systems, using part number 10300466. The manual cylinder valves may develop stress corrosion cracks in the bottom plugged port, causing a leak.
The Heil Co. (Heil) is recalling certain 2021-2022 front end loader garbage trucks. The vertical welds on the automatic front loader (AFL) arm may be missing, causing the arm to crack and fall.
The Heil Co. (Heil) is recalling certain 2024 front end loader garbage trucks. The fuel shutoff solenoid may fail, resulting in an engine stall while driving.
The Heil Co. (Heil) is recalling certain 2018-2020 front end loader garbage trucks. Excessive vibrations may cause the front head hydraulic tubes to leak.
The Heil Co. (Heil) is recalling certain 2020-2023 Side Loader garbage trucks. The battery support bracket may break and damage the battery case, possibly resulting in a battery rupture.
Entrans International LLC (Entrans) is recalling certain 2017-2020 Heil AJB9-1040 Hybrid trailers. Cracks may develop in the front and rear areas of the frame.
Heil Environmental (Heil) is recalling certain 2014-2016 Rear Loader, Side Loader, Front End Loader and Rolloff Body/Hoist garbage trucks. The hydraulic oil tank brackets may crack, causing the oil tank to detach from the chassis frame rails and leak hydraulic oil.
Burch Tank and Truck (Burch) is recalling certain 2017 Heil Cargo tank trailers, equipped with MPA/MTA suspensions and Meritor EX225 brakes. The brake caliper bolts on these axles may not be properly torqued which can allow the caliper to detach from the mounting flange.
Heil Company (Heil) is recalling certain model year 2014-2016 Petroleum, Crude, Dry Bulk and Flatbed trailers manufactured January 1, 2014, to June 18, 2016. These trailers are equipped with certain Bendix SR5 spring brake valves which may have been improperly machined which could cause a delay of application of the spring brakes while parking.
Heil Company (Heil) is recalling certain model year 2000-2014 Petroleum Pull Trailers manufactured August 29, 2000, to September 12, 2014. On the affected trailers, the cables of the secondary coupling system may fail to keep the trailer connected to the tow vehicle if the pintle hitch connection should fail.
HEIL IS RECALLING CERTAIN 2004 THROUGH 2010 DURAPACK AND MULTIPACK REFUSE COLLECTION VEHICLE AUTOMATED SIDE LOADERS WITH PYTHON LIFTS UTILIZING PROGRAMMABLE LOGIC CONTROL (PLC) TO ACTIVATE GRABBER CLOSE AND LIFT FUNCTIONS. CARBON CAN BUILD UP ON INTERNAL RELAYS WITHIN THE PLC AND THIS CAN CAUSE A BRIDGING OR INADVERTENT CIRCUIT COMPLETION DUE TO VIBRATION.
HEIL IS RECALLING CERTAIN MODEL YEAR 2006-2009 RAPID RAIL AND CP PYTHON BODIES GARBAGE TRUCKS WITH BOLT-ON REAR HINGE ASSEMBLIES. AFFECTED BODIES ARE THOSE WHICH HAVE A BOLT ON REAR HINGE ASSEMBLY BUT DO NOT HAVE STRUCTURAL GUSSETS TO REINFORCE THE Z-PLATE. CRACKING CAN OCCUR IN THE Z-PLATE AREA AND A FAILURE CAN RESULT WHEN THE BODY IS IN THE RAISED POSITION DURING WASTE UNLOADING PROCEDURES.