Scholly Fiberoptic Gmbh Robert-Bosch-Str. 1-3 Denzlingen Germany Recalls

All product recalls associated with Scholly Fiberoptic Gmbh Robert-Bosch-Str. 1-3 Denzlingen Germany.

Get alerts for this brand

Recall Summary

Total Recalls

11

Past Year

0

Class I (Serious)

0

Most Recent

Jun 2023

Data from FDA, USDA, CPSC, and NHTSA public records. Recall counts vary by company size, industry, and reporting practices. Always check official sources for current information.

Showing 1–11 of 11 recalls

UroLift Visual Obturator (Scholly Fiberoptic) – Weld Defect (2023)

There is an improperly performed weld between the cone of the sheath lock and tube of the obturator; mechanical load capacity is impaired, and fracture of the welded joint may occur. Contamination can occur in this capillary gap, which is not covered by the reprocessing validations performed.

FDAJun 23, 2023Nationwide• Scholly Fiberoptic Gmbh Robert-Bosch-Str. 1-3 Denzlingen Germany

Medical Intelligence Medizintechnik Gmbh Robert-bosch-str. 8 Schwabmunchen Germany: IGuide System, software versions: 2.2.0, 2.2.1, 2.2.2 ...

Sometimes, although the HexaPOD has reached the target position, the Constant Correlation Check (CCC) can be too sensitive and iGUIDE may incorrectly demand a verification scan.

FDAJul 18, 2019Nationwide• Medical Intelligence Medizintechnik Gmbh Robert-bosch-str. 8 Schwabmunchen Germany

ROBERT BOSCH HDP5 FUEL PUMP FLANGE Equipment Recall: FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

Fire/Burn Risk

Robert Bosch LLC (Bosch) has submitted a Defect Information Report based upon decisions made by Ford Motor Company and General Motors to conduct recalls (numbers 18V392 and 18V358 respectively) to inspect and replace certain Robert Bosch HDP5 High Pressure Fuel Pump Assemblies, part numbers 0261520518 and 0261520515. Welds between the pump housing and the mounting flange may fracture, possibly causing a fuel leak.

NHTSAJun 19, 2018Nationwide• ROBERT BOSCH

Bosch Hammer Drills (Robert Bosch) – injury risk (2008)

The recalled hammer drill is blue with "BOSCH" printed on the side. The model number 1191VSR can be located on the product nameplate mounted on the side of the motor. The product's packaging will be marked as 1191VSRK (the "K" indicates that the hammer drill was packaged with a case in a kit). Only drills with a serial number that begins with "7" are included in the recall.

CPSCJun 12, 2008Nationwide• Robert Bosch Tool Corp., of Mount Prospect, Ill.

Skil Circular Saws (Bosch) – Laceration Hazard (2007)

Laceration Risk

The recall involves Skil® brand circular saws with model numbers 5650, 5700, 5750 and 5755. The model number and date code are printed on the nameplate located on the front of the saw. The recall includes the following date codes: 28101 - 29231 38101 - 39231 48101 - 49231 58101 - 59231 68101 - 69231 No other models or date codes are included in this recall.

CPSCAug 15, 2007Nationwide• Robert Bosch Tool Corp., of Mount Prospect, Ill.

Vermont American Masonry Drill Bits (Bosch) – safety warning (2006)

Laceration Risk

The drill bits are 1/4 inch by 13 inches long, 5/16 inch by 13 inches long, 3/8 inch by 13 inches long, and 1/2 inch by 13 inches long. They were sold separately as accessories under the "Vermont American" brand name under catalog numbers: 14044, 14045, 14046, and 14048.

CPSCJun 9, 2006Nationwide• Robert Bosch Tool Corp., Mt. Prospect, Ill.

Vermont American Abrasive Cut-Off Wheels (Robert Bosch) – Safety Label Missing (2006)

Fire/Burn Risk

The wheels have a black, abrasive exterior; a red circular label on the interior; and are used to clean, slot, nick and cut metal. The wheels were sold under the "Vermont American" brand name had the following catalog numbers, diameters and blade thickness: Item # Diameter Blade Thickness 28026 6-1/2" 1/8" 28027 7"-7-1/4" 1/8" 28028 8" 1/8" 28030 10" 1/8" 28032 12" 1/8" 28033 14" 1/8"

CPSCJun 9, 2006Nationwide• Robert Bosch Tool Corp., Mt. Prospect, Ill.

BOSCH Circular Saws – Potential Malfunction (2005)

The recalled circular saws include the BOSCH CS10, CS20 and CS20-XC models, which can be identified on the product nameplate mounted on the top of the motor housing. The recalled models do not have an asterisk (*) in the serial number box. The circular saw uses a 7¼-inch blade and has a blue handle and motor enclosure, and a metal guarding system. The name "BOSCH" is printed on the blade guard.

CPSCMay 18, 2005Nationwide• Robert Bosch Tool Corp., of Mount Prospect, Ill.

Skil Table Saw Model 3400 (Bosch) – Safety Concern (2004)

Laceration Risk

Only Skil® table saws with model number 3400 printed on the front side of the table base with the date codes listed below are included in the recall. Date codes are printed on the upper right corner of the table base and include 2002 date codes 28501-28831, 2003 codes 38101-39231 and 2004 codes 48101-48811. The table saw holds a 10-inch blade and is made of metal tabletop with a red plastic base.

CPSCDec 6, 2004Nationwide• Robert Bosch Tool Corporation, of Mount Prospect, Ill.

Abrasive Cut-Off Wheels (Bosch) – Performance Risk (2004)

Laceration Risk

The wheels were sold under the "BOSCH" brand name under the following catalog numbers: Catalog Number Description 2610917994 12-inch type 1 abrasive cut off wheel intended for cutting stainless steel in stationary machines 2610917996 12-inch type 1 abrasive cut off wheel intended for metal cutting in portable machines with 1-inch arbor 2610917998 12-inch type 1 abrasive cut off wheel intended for metal cutting in portable machines with 1-inch arbor 2610918000 12-inch type 1 abrasive cut off wheel intended for concrete/masonry in portable machines with 1-inch arbor 2610918002 12-inch type 1 abrasive cut off wheel intended for concrete/masonry in portable machines with 20mm arbor 2610918004 12-inch type 1 abrasive cut off wheel intended for asphalt/green concrete for portable machines with 1" arbor 2610918006 12-inch type 1 abrasive cut off wheel intended for asphalt/green concrete for portable machines with 20mm arbor 2610918009 3-1/16-inch AL Oxide metal cutting wheel, 3/8-inch arbor 2610918010 4-1/16-inch AL Oxide metal cutting wheel, 3/8-inch arbor 2610918011 2-1/2-inch by .045-inch AL Oxide metal cutting wheel, 3/8-inch arbor 2610918012 2-1/2-inch by .045-inch AL Oxide metal cutting wheel, 1/4-inch arbor 2610918013 3-inch by .045-inch AL Oxide metal cutting wheel, 3/8-inch arbor 2610918014 3-inch by .045-inch AL Oxide metal cutting wheel, 1/4-inch arbor 2610918015 4-inch by .045-inch AL Oxide metal cutting wheel, 3/8-inch arbor 2610918016 4-inch by .045-inch AL Oxide metal cutting wheel, 1/4-inch arbor 2610918017 4-inch by .045-inch AL Oxide metal cutting wheel, 5/8-inch arbor The recalled 12-inch-diameter wheels can be identified by a stamped expiration date in the metal center ring of "V 6/2007" or before. Expiration date "V 7/2007" and after are not included in this recall. The smaller wheels (2-1/2-inch to 4-inch diameter) under this recall will state "Made in Bulgaria." The replacement smaller wheels will state "made in Canada," and are not affected by this recall.

CPSCNov 15, 2004Nationwide• Robert Bosch Tool Corp., of Mt. Prospect, Ill.

Skil Warrior Drill Chargers – Electrical Concern (2003)

These chargers were sold with or as accessories for Skil Warrior drills. The drills are black with red trim. Red lettering on the drills reads, "SKIL." The chargers have their volt size written in red lettering. The recall includes 9.6-volt, 12-volt, 14.4-volt and 18-volt chargers. The chargers were included with tool model numbers 2375, 2380, 2475, 2480, 2482, 2580, 2582 and 2882. Chargers also were sold separately with model numbers 92950, 92970, 92980 and 92990 with part number 2610995852. The model and part numbers are written on labels found on the back of the plug or on the side of the chargers.

CPSCFeb 14, 2003Nationwide• Robert Bosch Tool Corp., of Chicago, Ill.

Stay Informed

Scholly Fiberoptic Gmbh Robert-Bosch-Str. 1-3 Denzlingen Germany Recalls

Recall Summary

UroLift Visual Obturator (Scholly Fiberoptic) – Weld Defect (2023)

Medical Intelligence Medizintechnik Gmbh Robert-bosch-str. 8 Schwabmunchen Germany: IGuide System, software versions: 2.2.0, 2.2.1, 2.2.2 ...

ROBERT BOSCH HDP5 FUEL PUMP FLANGE Equipment Recall: FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

Bosch Hammer Drills (Robert Bosch) – injury risk (2008)

Skil Circular Saws (Bosch) – Laceration Hazard (2007)

Vermont American Masonry Drill Bits (Bosch) – safety warning (2006)

Vermont American Abrasive Cut-Off Wheels (Robert Bosch) – Safety Label Missing (2006)

BOSCH Circular Saws – Potential Malfunction (2005)

Skil Table Saw Model 3400 (Bosch) – Safety Concern (2004)

Abrasive Cut-Off Wheels (Bosch) – Performance Risk (2004)

Skil Warrior Drill Chargers – Electrical Concern (2003)