Loading...
Loading...
All product recalls associated with TEREX.
Total Recalls
73
Past Year
1
Class I (Serious)
0
Most Recent
Feb 2025
Data from FDA, USDA, CPSC, and NHTSA public records. Recall counts vary by company size, industry, and reporting practices. Always check official sources for current information.
Terex South Dakota, Inc. (Terex) is recalling certain model year 1997-2013 XT55 and XT60 Aerial Devices mounted on utility trucks. Cracks may develop around the lower boom hinge pin boss at the turntable.
Terex is recalling certain model year 2012-2013 Aerial Devices and Digger Derricks manufactured September 2012 through February 2013. The lock valve cavity in the outrigger cylinder may be machined incorrectly and the seals may be damaged.
Terex South Dakota, Inc. (Terex) is recalling certain model year 1998-2005 OM Aerial Devices used on utility trucks. The leveling arm at the elbow can develop fatigue cracks.
Terex South Dakota, Inc. (Terex) is recalling certain model year 2000-2009 TC, RM, OM-DHL, and XM Aerial Device utility trucks which have boom controls mounted in a console at the truck bed. A seal within the hydraulic rotary manifold may fail causing the aerial device to move inadvertently.
Terex South Dakota, Inc. (Terex) is recalling certain model year 2012 T292, TL, and NT Aerial Devices installed on utility trucks and equipped with a 110 VAC inverters. The Ground Fault Interrupt (GFI) may not offer GFI protection due to the neutral wire being ungrounded in the inverter.
Terex South Dakota, Inc. (Terex) is recalling certain model year 1999-2012 XL4000 Digger Derrick utility trucks. The shims and spacers used to adjust the length of the hydraulic cylinder may give, causing the rod eye and threads to fatigue while lifting loads.
Terex South Dakota, Inc. (Terex) is recalling certain model year 2012 utility trucks with SCM Aerial Devices. The lifting device's leveling arm may flex at the elbow and contact the boom structure. This may cause the leveling arm to break.
TEREX IS RECALLING CERTAIN MODEL YEAR 1997 THROUGH 2009 XT55 AERIAL DEVICES MOUNTED ON TRUCKS. THESE VEHICLES ARE USED TO ELEVATE PERSONNEL TO TRIM TREES AND FOR UTILITY WORK WHILE PARKED IN THE WORK AREA. CRACKS CAN DEVELOP AROUND THE LOWER BOOM HINGE PIN BOSS AT THE TURNTABLE WHICH CAN PROGRESS INTO FAILURE OF THE PLATES IF NOT DETECTED.
TEREX IS RECALLING CERTAIN MODEL YEAR 2000 AND 2001 HR37M AND HR40M UTILITY TRUCKS MANUFACTURED FROM NOVEMBER 2000 THROUGH DECEMBER 2001. THE AERIAL DEVICES INSTALLED ON THESE TRUCKS MAY CONTAIN A LOWER BOOM LIFT CYLINDER WITH DEFECTIVE COMPONENTS. THE MATERIAL USED TO PRODUCE THE CYLINDER ROD ENDS WAS NOT TO SPECIFICATIONS.
TEREX IS RECALLING CERTAIN MODEL YEAR 2009 AND 2010 TCP40 UTILITY TRUCKS MANUFACTURED FROM JANUARY 2009 THROUGH NOVEMBER 2010. A LOWER CONTROL LEVER MAY HAVE A DEFECT THAT ALLOWS UNINTENDED MOVEMENT OF THE BOOM OR BUCKET.
TEREX IS RECALLING CERTAIN MODEL YEAR 2008-2010 AERIAL DEVICE AND DIGGER DERRICK UTILITY VEHICLES MANUFACTURED FROM JUNE, 2008 THROUGH NOVEMBER, 2010. THE LANYARD ANCHORS WERE NOT HEAT TREATED PROPERLY AND MAY FRACTURE.
TEREX TELELECT IS RECALLING CERTAIN MODEL YEAR 1999 THROUGH 2009 TEXOMA 330 AUGER DRILLS WITH TELESCOPING POLESETTER EXTENSION MOUNTED ON TRUCKS. THE VEHICLES INVOLVED UTILIZED A HYDRAULIC CYLINDER TO ARTICULATE THE POLESETTER EXTENSION. THE VEHICLES ARE PRESSURE DIGGERS USED TO DRILL HOLES AND HANDLE POLES. THE EXTENSION CAN HAVE UNINTENDED MOVEMENT UP TO 4 TO 6 INCHES WHEN OTHER FUNCTIONS ARE OPERATED.
TEREX TELELECT IS RECALLING CERTAIN MODEL YEAR 1998 THROUGH 2009 XT60 AERIAL DEVICES MOUNTED ON TRUCKS. THESE VEHICLES ARE USED TO ELEVATE PEOPLE INTO WORK AREAS UP TO 60 FEET IN THE AIR. CRACKS CAN DEVELOP AROUND THE LOWER BOOM HINGE PIN BOSS AT THE TURNTABLE WHICH CAN PROGRESS INTO FAILURE OF THE PLATES IF NOT DETECTED.