Loading...
Loading...
All product recalls associated with YAMAHA.
Total Recalls
74
Past Year
3
Class I (Serious)
0
Most Recent
Nov 2025
Data from FDA, USDA, CPSC, and NHTSA public records. Recall counts vary by company size, industry, and reporting practices. Always check official sources for current information.
Yamaha Motor Corporation , USA (Yamaha) is recalling certain model year 2014-2016 WR250R motorcycles manufactured August 1, 2013, to June 1, 2016. Due to an incorrect assembly process, the clutch push lever oil seal may crack, allowing engine oil to leak out.
Yamaha Motor Corporation (Yamaha) is recalling certain model year 2015-2016 YZF-R3 F/G motorcycles manufactured January 1, 2015, to April 15, 2016. The clutch pressure plate bearing may break due to an insufficient load rating, causing the clutch to not disengage and preventing the transmission from shifting properly.
Yamaha Motor Corporation, USA (Yamaha) is recalling certain model year 2015-2016 Yamaha YZF-R3 F/G motorcycles manufactured January 1, 2015, to April 15, 2016. Due to an oil pump problem, the oil pressure in these motorcycles may not be properly regulated. As a result, the oil pump drive gear may fail and cause the engine to seize from lack of oil supply.
Yamaha Motor Corporation, USA (Yamaha) is recalling certain model year 2015 YZFR1, YZFR1C, YZFR1MF and YZFR1MFC motorcycles manufactured August 1, 2014, to June 1, 2015. The affected motorcycles have transmission gears that may fail.
Yamaha Motor Corporation, USA (Yamaha) is recalling certain model year 2015 YZFR3 motorcycles manufactured January 1, 2015, to August 31, 2015. The affected motorcycles may have an incorrectly manufactured upper triple clamp (handle crown) that may crack while riding.
This recall involves the 2015 SRViper L-TX (Model name SR10LSFO) and the 2015 SRViper M-TX 162 LE (Model name SR10M62LFO) snowmobiles. The recalled snowmobiles are blue and orange. The model name is on the left and right side of the fuel tank cowling. SRViper and Yamaha are printed on the side of the snowmobiles. The vehicle identification number (VIN) is stamped on the frame (tunnel) near the right foot well. The letter F in the 10th position of the VIN indicates that the unit was made in the 2015 model year.
Yamaha Motor Corporation, USA (Yamaha) is recalling certain model year 2008-2011 WR250X motorcycles manufactured June 1, 2008, to June 1, 2011 and 2008-2015 WR250R motorcycles manufactured June 1, 2008, to June 1, 2015. In the affected motorcycles, the insulation on the stator coil, a component of the alternator, may become damaged and short circuit to due insufficient heat resistance.
Yamaha Motor Corporation, USA (Yamaha) is recalling certain model year 2015 YZFR1M motorcycles manufactured January 19, 2015, to March 23, 2015. The affected motorcycles may have been built with an improperly manufactured rear shock absorber. The nut on the damper rod for these shock absorbers may loosen, resulting in a loss of damping and the possible disassembling of the shock.
This recall involves 2015 model YXC700DF (Viking VI), YXC700DHFH (Viking VI Hunter), YXC700PF (Viking VI EPS) and YXC700PHFH (Viking VI EPS Hunter) side x side vehicles. Model numbers can be found on the owner's manual. The letter F in the 10th position of the Vehicle Identification Number (VIN) indicates that the vehicle is 2015 model. The VIN is stamped on the frame behind the left rear wheel. The "Viking VI" model name is printed on the left side of the front hood. The vehicles come in Realtree (multicolor), hunter green, red and steel blue.
Yamaha Motor Corporation, USA (Yamaha) is recalling certain model year 2015 FJ-09 (FJ09F/FC), FZ-09 (FZ09F/FC), FZ6R (FZ6RF/FC), Super Tenere (XTZ12F/FC), Super Tenere ES (XTZ12EF/EFC), and R6 (YZF-R6) motorcycles manufactured September 1, 2014, to November 17, 2014. The affected motorcycles may have an incorrectly manufactured shift cam segment stopper, having a sharp edge on the inside of the bend instead of a smooth radius. As a result, the stopper can crack and possibly fracture at this sharp edge.
Yamaha Motor Corporation, USA (Yamaha) is recalling certain model year 2013-2015 Yamaha XT250 motorcycles manufactured August 1, 2012, to October 1, 2014. The affected motorcycles contain an air induction pipe and hose which may fail after prolonged periods of high RPM operation. The air induction hose may melt causing hot exhaust gases to leak from the hose.
Yamaha Motor Corporation, USA (Yamaha) is recalling certain model year 2015 FZ07 motorcycles manufactured May 1, 2014, to September 30, 2014. In the affected motorcycles, the positive battery cable may be pinched between the seat base and seat bracket.
Yamaha Motor Corporation, U.S.A. (Yamaha) is recalling certain model year 2014 Yamaha YZF-R6 motorcycles manufactured August 1, 2014, to September 1, 2014. The front and rear wheels of the affected motorcycles may have been manufactured with insufficient hardness.
Yamaha Motor Corporation, USA (Yamaha) is recalling certain model year 2014 Yamaha FZ09 motorcycles manufactured August 1, 2013, to August 29, 2014. The affected motorcycles may have a headlight harness that is too short and when the handlebars are turned fully to the left or right the harness may break near the coupler or coupler may disconnect from the headlight bulb.
Yamaha Motor Corporation USA (Yamaha) is recalling certain model year 2009-2013 YZFR1 motorcycles manufactured October 2008 through August 2013 and 2012-2013 XTZ12 motorcycles manufactured October 2011 through August 2013. In the affected motorcycles, use of the headlight may generate enough heat to cause the bulb connections to expand, resulting in arcing in the headlight bulb socket which could cause the socket to overheat, melt and cause the headlight to malfunction.
Yamaha is recalling certain model year 2011 XC50A (Vino Classic) motorcycles manufactured from April 2011 through August 2011. Due to improper adhesion, the brake shoe linings may separate from the front and rear brake shoes.
Yamaha Motor Company (Yamaha) is recalling certain model year 2014 XVS950CU (Bolt) motorcycles manufactured March 2013 through June 2013. Slack or sag in the wiring harness may allow it to contact the exhaust manifold causing the wires to melt, and possibly short circuit.
Yamaha is recalling certain model year 2009 YW125 (Zuma 125) scooters manufactured between July 2008 and April 2009 due to possible improper clearances in the internal fuel pump components. These improper clearances may cause an inadequate supply of fuel.
YAMAHA IS RECALLING CERTAIN MODEL YEAR 2012 XTZ12B/BC (SUPER TENERE) MOTORCYCLES, MANUFACTURED FROM JUNE 01, 2011, THROUGH AUGUST 31, 2011. DURING THE ASSEMBLY PROCESS, THE FUEL PUMP O]RING MAY HAVE BEEN INSTALLED INCORRECTLY IN ITS GROOVE. IF THE TABS LOCATED AROUND THE INNER CIRCUMFERENCE OF THE O]RING WERE NOT SEATED INTO THE GROOVE PROPERLY DURING PUMP INSTALLATION, THE O]RING SEALING LIP COULD BE PINCHED AND DAMAGED, PREVENTING PROPER SEALING.
YAMAHA IS RECALLING CERTAIN MODEL YEAR 2009-2012 XVS95/CT (V STAR 950/V STAR 950 TOURER) MOTORCYCLES, MANUFACTURED FROM OCTOBER 2008 THROUGH AUGUST 2011, AND MODEL YEAR 2007 XVS1300/CT (V STAR 1300/V STAR TOURER) MOTORCYCLES, MANUFACTURED FROM AUGUST 2006 THROUGH MARCH 2007. THERE MAY NOT BE A PROPER SEAL BETWEEN THE FUEL PIPES FOR THE FUEL INJECTORS AND THE FUEL HOSE THAT CONNECTS THEM DUE TO AN IMPROPERLY MOLDED FUEL HOSE.