Loading...
Loading...
Vehicle, tire, and automotive equipment recalls from NHTSA. Check if your car, truck, or motorcycle has safety recalls.
Suspension Forks Recalled by Giant Bicycle NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE CONTACT: Ken Giles December 20, 1996 (301) 504-7052 Release # 97-051 CPSC and Giant Bicycle Announce Suspension Fork Recall WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Giant Bicycle Inc. of Rancho Dominguez, Calif., is announcing a voluntary recall of 8,500 CFM-3 mountain bike suspension forks. The fork crown can separate from the legs, causing riders to lose control of the mountain bike and fall. Giant has received nine reports of alleged injuries, including cuts, bruises, and broken bones. The silver steel forks have black decals, which read "GIANT ZORBERS" on the front of the suspension fork legs. Authorized Giant Bicycle dealers sold the forks as original equipment on 1993 model year Giant ALM-1, ATX-780, and CFM-3 mountain bikes nationwide from September 1992 to June 1994 for $650 to $1,000. Giant Bicycle dealers also sold the forks as replacement parts and after-market equipment during the same time period for up to $150. Consumers who own recalled forks should stop using their bicycle immediately and take it to any authorized Giant Bicycle dealer for a free inspection, and if necessary, free replacement of the suspension fork. Consumers should not attempt to repair the bicycles. For more information or for the location of the nearest Giant Bicycle dealer, consumers should call (800) 874-4268.
ATV Snow Blades Repair by Cycle Country Accessories NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE CONTACT:Ken Giles November 7, 1996 (301) 504-7052 Release # 97-020 CPSC, Cycle Country Accessories Announce Fix for ATV Snow Blades WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Cycle Country Accessories Corporation is announcing the recall and free retrofit of their snow blades used on all terrain vehicles (ATVs). The snow blades, available in kits manufactured prior to June 1991, used a solid lift link to raise the snow blade. Under certain conditions, this solid lift link may cause the snow blade's lift lever to swing back, striking the operator's knee. In June 1991, Cycle Country Accessories changed the design using a chain link to lift the snow blade to reserve the solid link as a tool-box accessory for special applications. Cycle Country Accessories is aware of three reports of the lift levers with the solid link striking the ATV operator's knee. The snow blade attachment is an ATV add-on kit, which includes a plow blade and the related hardware. When attached to an ATV, the snow blade can be used for plowing snow, gravel, or other light plowing duties. Cycle Country Accessories distributed the plow blade kits with the solid lift link from 1982 to 1991. Consumers who purchased a Cycle Country snow blade kit for their ATV before or during 1991 can get a free chain link by contacting the ATV dealer who sold them the snow blade kit. They can also call Cycle Country toll-free at (800) 841-2222.
Yard and Garden Tractor Recalled by TORO NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE CONTACT: Ken Giles September 25, 1996 (301) 504-7052 Release # 96-190 CPSC and TORO Announce Yard and Garden Tractor Recall WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), The Toro Company of Bloomington, Minn., is voluntarily recalling approximately 6,500 TORO Wheel Horse Yard and Garden Tractors as well as Ford and New Holland brand LS 25 and LS 45 Gear Yard Tractors. The tractors' brakes may wear out prematurely, eventually leading to brake failure. As a result, consumers could be injured if they lose control of the tractors. Toro has received reports of two consumers who each broke a foot after losing control of their tractors. This recall and repair program affects TORO model 72040 tractors with serial numbers ranging from 4900001 to 5999999; Ford or New Holland model LS 25 Gear tractors with serial numbers from T4A0001 to T4A1201, and T5A0001 to T5A0617; and Ford or New Holland model LS 45 Gear tractors with serial numbers from T4C0001 to T4C0581, and from T5C0001 to T5C0168. The model and serial numbers are located on the fender underneath the seat. TORO and New Holland dealers sold the six-speed riding tractors nationwide under the names "TORO," "Ford," and "New Holland" from January 1994 to May 1996 for about $2,000 each. Consumers who own recalled TORO tractors should contact the nearest TORO Service Dealer to have the brakes modified at no charge. For information on how to locate a TORO Service Dealer or for more information about this recall, consumers should call Toro at (800) 348-2424 from 7:30 a.m. to 4:30 p.m. Central Time. Consumers who own recalled Ford or New Holland brand LS 25 or LS 45 Gear tractors should contact the nearest New Holland Service Dealer. For information on how to contact a New Holland Dealer, consumers should consult the owners assistance page in their operators manual for the name or number of their closest New Holland branch. If the manual has been misplaced, consumers should look in the yellow pages under "Tractors" for the nearest New Holland dealer. This recall involves tractors purchased before May 1996. The brakes on tractors purchased after May 1996 were modified prior to sale. Consumers who are unsure whether their tractor was modified should contact the nearest appropriate brand dealer for a free inspection.
Carbon Fiber Mountain Bike Fork Recalled by Girvin NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE CONTACT: Media Relations July 18, 1996 (301) 504-7908 Release # 96-168 CPSC and Girvin Incorporated Announce Carbon Fiber Mountain Bike Fork Recall WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Girvin Incorporated of Woonsocket, R.I., is voluntarily recalling 120 Thermoplastic Carbon Fiber Girvin CL Suspension Forks with legs manufactured by Applied Fiber Systems (AFS). The mountain bike forks may crack or separate, causing a rider to lose control of the bicycle and fall. Girvin Incorporated has received four reports of forks breaking. CPSC is not aware of any injuries associated with the forks. The lightweight, black forks have white "Girvin" decals on each leg and yellow drop-outs. The recalled forks have serial numbers between 039297 and 040478 stamped on the bottom of the top fork link, the metal piece connecting the legs at the top of the fork. Authorized Girvin dealers sold the Girvin CL forks nationwide from March 1996 through June 1996 as after-market equipment for $599. Consumers who own bicycles with the defective Girvin CL Suspension Forks should stop using the bicycles immediately and call Girvin Incorporated Technical Services at (800) 447-3824, extension 316. Girvin Incorporated will give consumers a free set of aluminum legs until replacement carbon fiber legs are available.
Bicycle Recalled by Performance NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE CONTACT: Media Relations May 8, 1996 (301) 504-7908 Release # 96-120 CPSC and Performance Inc. Announce Bicycle Recall WASHINGTON, D.C. - In cooperation with the U.S Consumer Product Safety Commission (CPSC), Performance Inc. of Chapel Hill, N.C., is voluntarily recalling about 5,000 bicycles with defective seat posts manufactured by Polygon Industries Corp. of Taiwan, R.O.C. The seat posts have a clamp bolt under them, which can break or fracture. Riders could be seriously injured by losing control of a bicycle with a broken seat post. Performance has received five reports of the seat posts failing, resulting in minor injuries, including cuts and bruises. Performance bicycles, models X203, X204, M603, M604, M704, and M705, are equipped with a defective PM-215 seat post. Performance bicycle stores and the Performance mail order catalog sold the bicycles nationwide from March 1993 through April 1996 for between $300 and $500, depending on the model. Consumers should stop using the bicycles immediately and call Performance's Technical Department at (800) 553-8324 or return the bicycles to the nearest Performance Bicycle Shop, where the seat post clamp bolt will be replaced free-of-charge.
Snowmobile Recalled by Polaris NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE CONTACT: Media Relations May 1, 1996 (301) 504-7908 Release # 96-116 CPSC and Polaris Announce Snowmobile Recall WASHINGTON, D.C. - In cooperation with the U. S. Consumer Product Safety Commission (CPSC), Polaris Industries Partners L.P. of Minneapolis, Minn., is announcing the voluntary recall of 19,327 Polaris snowmobiles. On some snowmobiles, the handlebars were not completely welded to the steering posts. If the handlebars break, a driver could lose control of the snowmobile and cause an accident or crash. Polaris is aware of three snowmobile accidents resulting from the handlebars breaking due to an incomplete weld. One driver received a minor injury. In January, Polaris initiated this recall by contacting consumers directly through letters and Polaris service bulletin number SB96-05. This recall affects the following 1996 model year Polaris snowmobiles: Model name Model Number XLT Touring model numbers 0963357 and E963357 Classic model number 0963865 500 SKS model numbers 0962564 and E962564 500 EFI model number 0963774 500 EFI RMK model number 0962974 Trail model number 0962761 Classic Touring model numbers 0963365 and E963365 500 (Carb) model number 0962764 500 RMK model number 0962964 500 EFI SKS model number 0962574 Trail Tourin model numbers 0962262 and E962262 440 model number 0962760 The recalled snowmobiles have serial numbers within the following ranges: 2623600 through 2633599; 2649419 through 2650441; 2673200 through 2687804; 2696969 through 2698569; 2833600 through 2833640; and 2619488. The serial number is located on the right side of the tunnel where drivers place their right foot. Polaris dealers sold the snowmobiles nationwide from March 1995 through April 1996 for suggested retail prices between $5,000 and $7,000 each, depending on the model. Consumers who own these snowmobiles should stop using them immediately and return them to any authorized Polaris dealer for inspection, unless they have already responded to the letter they received regarding this and had their snowmobile inspected. If necessary, the handlebars will be replaced at no charge. For the location of the nearest Polaris dealer, consumers should call (800) POLARIS. CPSC urges consumers who own Polaris snowmobiles to participate in this retrofit program as part of their regular, post-season snowmobile maintenance procedures.
Mountain Bike Suspension Fork Recalled by Answer Products NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 Note: Telephone Number Change, email address addition. FOR IMMEDIATE RELEASE CPSC Consumer Hotline: (800) 638-2772 Originally issued April 30, 1996; Last Revised September 16, 2009 CPSC CONTACT: (301) 504-7908 Release # 96-114 CPSC, Answer Products Announce Mountain Bike Suspension Fork Recall WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Answer Products Inc. of Valencia, Calif., is voluntarily recalling 69,000 Manitou Mach 5 mountain bike suspension forks. The forks can crack and break, causing the front wheel to separate from the bicycle. As a result, riders could lose control of the bicycle and fall. Answer Products has received 49 reports of the forks cracking. Five consumers sustained injuries including cuts, bruises, and scrapes. The recalled forks have both the Manitou and Mach 5 logos on the sides of the lower legs. The fork's serial number is located on the back of the lower part of the fork leg. Mach 5 forks with serial numbers less than 5100086500 have outer leg castings that should be replaced. Forks with serial numbers between 5100086500 and 5100149464 should be professionally inspected by an authorized Answer Products retailer. If necessary, Answer Products will replace castings at no charge to the consumer. Bicycle dealers worldwide have sold the Mach 5 forks as original equipment on over 27,000 Trek, Fisher, Diamondback, Marin, Mongoose and other high-end bicycles. Bicycle dealers also sold over 41,000 forks as after-market equipment for $270 to $380. Consumers who own recalled forks should stop using them immediately and contact Answer Products, Inc. at 888.MTN.DISC (888.686.3472) 8:00 a.m. - 4:30 p.m. Central Time or at manitoutech@hayesbicycle.com for instructions on returning the forks. Consumers can also return the fork to the store where purchased for free replacement. Mach 5 forks with red dots on the inside of the drop out have been inspected and are not subject to this recall, regardless of serial number. All Mach 5 forks with serial numbers greater than 5100149464 do not need further inspection and are not subject to this notice. Media inquires should be directed to Roger Gauvin, Answer Marketing Manager at (805) 294-4134.
December 21, 1995 Release # 96-052 WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), MAVIC, S.A., of France, and it's distribution facilities in West Chester, Pa., is recalling 1,303 Cosmic brand bicycle wheels for road bikes. The front wheel hub may fracture and cause the spokes to come loose, and as a result the rider could lose control of the bicycle and fall.MAVIC is recalling 1,126 front wheels sold between December 19, 1994 and June 29, 1995, with serial numbers 275 94 000 through 365 94 000 and 001 95 000 through 179 95 000. The company also is recalling 177 rear wheels sold from March through June 1995 with serial numbers between 048 95 000 and 075 95 999. The serial number is located on the wheel rim. Bicycle specialty stores sold the front wheels for $339 and the rear wheels for $449 nationwide.Consumers should stop using the recalled wheels immediately and return them to the store where purchased for free repair. Consumers who already have had their wheels repaired under this recall need not take further action. Consumers with questions about this recall can call MAVIC at (800) 548-2945 or write the company at 207 Carter Drive, West Chester, Penn. 19382.CPSC is not aware of any incidents involving these bicycle wheels
December 18, 1995 Release # 96-045 WASHINGTON, D.C. - CPSC, Raleigh USA, of Kent, Wash., is recalling approximately 300 Technium MT 400 bicycle frames and 24 Technium FT 500 bicycle frames. The bicycle frames can fracture in the front at the headlug, and as a result, riders could be injured or killed if they are thrown from the bicycles. Raleigh USA is aware of two incidents in which frames have cracked or broken, causing injuries ranging from cuts and bruises to broken bones.The Model MT 400 bicycles, measuring 16.5 inches from the center of the bottom bracket to the seat, are red and black. The Model FT 500 bicycles, measuring 16.5 inches from the center of the bottom of the frame to the seat, are black and white. Authorized Raleigh Dealers and bicycle shops nationwide sold the bicycles between January and December 1993, for approximately $500 to $700.Consumers should check their bicycle's serial number, located on the bottom bracket of the bicycle frame. Consumers who own Raleigh Model MT 400 or FT 500 bicycles with serial numbers that have a number 3 as the sixth digit from the left should call Raleigh USA at (800) 222-5577. Raleigh will provide consumers the name of the nearest authorized Raleigh dealer, who will replace the frame free of charge. Raleigh may also be contacted via the Internet at raleighbik@aol.com
November 17, 1995 Release # 96-025 WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Paragon Racing Products, Inc.of Waconia, Minn., is voluntarily recalling approximately 75,000 4 - and 8-fluid ounce containers of Ground Effects Tire Traction Compound. The product, which contains methyl salicylate, was not packaged with child- resistant closures. The product is toxic and can cause serious injury or death if it is accidentally ingested.The Ground Effects Tire Traction Compound is used by hobbyists on the tires of model racing cars to help provide traction. Approximately 75,000 cans were sold nationwide in hobby supply stores from 1989 to August, 1995. The 4-fluid ounce package sold for approximately $6.50 and the 8-fluid ounce size for $10.50.Consumers should discontinue use of the product and call Paragon Racing Products at (612) 442-6364 to receive a free safety closure. Consumers can also write to Paragon at 340 Industrial Boulevard, Waconia, Minn. 55387.Under the Poison Prevention Packaging Act, products containing more than 5% methyl salicylate are required to be packaged in containers with child-resistant packaging. Paragon Racing Products and CPSC are not aware of any injuries associated with this product
August 16, 1995 Release # 95-155 WASHINGTON, D.C. - CPSC, Specialized Bicycle Components of Morgan Hill, Calif., is recalling 3,585 steel rigid forks on 1995 Stumpjumper mountain bikes and 52,868 handlebars on all models of 1994 Rockhopper mountain bikes. Specialized has received reports of handlebar and front brake failures, which could result in serious injury to bicycle riders.In addition to recalling and replacing the rigid forks on 1995 Stumpjumpers, Specialized is recalling and replacing all YC-A125PB handlebars, which were originally equipped on the following 1994 Rockhopper models: Rockhopper, Rockhopper Sport, Rockhopper GX, Rockhopper FS, Rockhopper Comp, and Rockhopper Comp FS. Specialized has received over 10 reports of injuries associated with broken handlebars.Authorized retailers sold mountain bikes with these recalled parts nationwide. Specialized is supplying authorized retailers with replacement parts for the rigid forks and handlebars.Consumers with 1995 Stumpjumper mountain bikes or 1994 models of Rockhopper mountain bikes should stop using their bikes immediately and bring them back to their authorized dealer for an inspection and fork or handlebar replacement free-of-charge. Consumers with questions about this recall can call Specialized Bicycle Components toll-free at (800) 214-1467. Direct media inquiries to Reed Pike, Quality Control manager, at (408)779-6229 ext. 2576
May 17, 1995 Release # 95-122 WASHINGTON, DC - CPSC, GT Bicycles Inc. of Santa Ana, Calif., is announcing an inspection and repair program for the forks on all 1995 GT "Aggressor" model bicycles. This inspection program affects approximately 4,000 bicycles, which are equipped with forks made by Polygon Industries, Inc. of Taiwan, R.O.C. The forks could break during use causing the rider to lose control of the bicycle and fall.CPSC is aware of 13 incidents in which bolts in the bicycles loosened, causing the bicycle forks to break. Although no serious injuries have been reported, the potential for injury is significant.One thousand GT-authorized retailers sold the bicycles nationwide between October 1994 and March 1995 for about $400.00. The bicycles, which have either a bright blue or candy red finish with "Aggressor" written on the frame, sold in adult sizes from 14 1/2 inches to 22 inches.CPSC and GT Bicycles are instructing consumers to stop using their 1995 GT "Aggressor" bikes and bring them to any authorized GT Bicycles dealer for a free inspection. Dealers will inspect the bicycles, tighten any loose bolts, and replace damaged forks at no cost to the consumer.For more information, consumers can call GT Bicycles at (800) 743-3248. Media inquiries should be directed to either Aaron Raines or Bill Galloway at the same telephone number
December 1, 1994 Release # 95-031 WASHINGTON, D.C. - As part of its ongoing investigation of injuries associated with mountain bikes, the U.S. Consumer Product Safety Commission (CPSC) and the following three companies are announcing the recall or retrofit of about 186,700 mountain bike seat posts. The seat posts have clamp bolts under the seat which may break or fracture, depending on the make and model, resulting in loss of bicycle control and serious injury to the rider.Since the summer of 1994, the companies and CPSC have received at least 25 reported incidents of seat post breakage, resulting in 17 claimed injuries.The following companies are participating in this recall: COMPANY MAKE/MODEL DISTRIBUTION DATES PROBLEM SpecializedBicycleComponentsMorgan Hill, CA(800) 214-1468 Polygon PM-215Delta DP127;and DP510 8/93-11/94130,000 units Cracking or fracturing of the seat post clamp bolt. Cannondale Corp.Georgetown, Conn.800-BIKEUSA Polygon PM-215 1994;1994 1/2;1995 models42,753 units Cracking or fracturing of the seat of the seat bolt. Fisher BicycleA Divison ofthe TrekBicycle Corp.Waterloo, Wis.800-879-8735 Polygon PM-215on Advance andRangitoto - GaryFisher models 8/93-12/9314,000 units Cracking or fracturing of the seat of the seat bolt. CPSC and the companies urge consumers to stop using bicycles that have these model seat posts and immediately contact the manufacturer or a local authorized dealer. Owners of recalled seat posts will receive instructions to take their bikes to the place of purchase for a FREE repair and replacment seat post clamp bolt assembly
June 30, 1994 Release # 94-101 PRODUCT: About 39,000 model 10201 and 10301 Lawn-Boy walk- behind lawn mowers purchased before January 1, 1994. PROBLEM: In certain conditions, the lawn mower's blade may not stop within three seconds after the mower is stopped, as is required by a 1982 federal standard. This results in an increased risk of injury to users or bystanders.WHAT TO DO: Contact a local Lawn-Boy service dealer to have the brake adjusted at no charge. For more information, customers can contact Lawn-Boy at (800) 526-6937.WASHINGTON, DC -- CPSC, The Toro Company of Bloomington, Minn. is voluntarily recalling certain 1993 and 1994 Lawn-Boy walk-behind lawn mowers. The mower's blade may not stop within three seconds after the mower is stopped, as is required by a 1982 federal standard. This results in an increased risk of injury to users or bystanders.The recall/repair program affects the following "Silver Series" mowers: Model # Serial # Range 10201 3949964-4939085 10301 3930644-4938617 The model number is located between the handles on the mower housing. This recall only affects mowers purchased before January 1, 1994. Mowers purchased after this date meet the standard.Customers who own one of these models should contact their Lawn-Boy service center to have the brake adjusted at no charge. For information on how to locate a Lawn-Boy service center, or for questions about this program, call Lawn-Boy at (800) 526-6937.The Toro Company has received no reports of injuries associated with this condition
AUGUST 30, 1993 Release # 93-105 PRODUCT: Approximately 7,900 16-inch model B-1601 Zenital sidewalk bicycles with training wheels. The bicycles, labeled with the name Zenital were imported from China and sold at swap meets in southern California, Arizona, and Texas between September 1992 and April 1993. PROBLEM: The bicycles have handbrakes but no footbrakes and lack handlebar stem insertion marks. Federal regulations require the bicycles be equipped with both handbrakes and footbrakes and handlebar stem insertion marks. Sidewalk bicycles with handbrakes, but no footbrakes, may present a risk of injury to young children who might not be able to stop the bicycles using handbrakes. WHAT TO DO: Consumers with these bicycles should contact Zenital, 10135 Rose Avenue, El Monte, CA 91731 or on 1-800-888-3558 to arrange for the bicycle to be modified for free at a local bicycle dealer. WASHINGTON, DC -- CPSC, Zenital, Inc. of El Monte, CA is voluntarily recalling about 7,900 16-inch model B-1601, Zenital sidewalk bicycles with training wheels. The bicycles are equipped with handbrakes, but no footbrakes and lack handlebar stem insertion marks. Federal regulations do not permit sidewalk bicycles to be equipped with handbrakes only and all bicycles must have handlebar stem insertion marks. Sidewalk bicycles with handbrakes, but without footbrakes, may present a significant risk of injury to young children who might not be able to stop the bicycles using handbrakes only. The handlebar stem insertion mark is required to place the stem at the proper depth in the head tube of the bicycle. The bicycles, labeled with the name Zenital were imported from China and sold at swap meets in southern California, Arizona, and Texas between September 1992 and April 1993. The bikes sold for approximately $30.00 each. The potentially hazardous bicycles were identified during a joint surveillance program conducted by CPSC and the U.S. Customs Service at the Port of Los Angeles. Consumers who have these bicycles should write to Zenital, Inc., 10135 Rose Avenue, El Monte, CA 91731, or they may call the firm at 1-800-888-3558 to arrange for the bicycle to be modified for free at a local bicycle dealer. Zenital, Inc. will have the dealers replace the rear wheel with a coaster brake and stamp the handlebar stem with a properly placed permanent minimum insertion mark. Neither CPSC nor the Zenital, Inc. is aware of any injuries involving this product. This voluntary recall is being conducted to prevent possible of injuries. Consumers with questions about this recall may contact Zenital, Inc. at 1-800-888-3558. CPSC is announcing this replacement program as part of its mission to protect the public from unreasonable risks of injury and death associated with consumer products. The Commission's objective is to reduce the estimated 28.6 million injuries and 21,700 deaths associated each year with the 15,000 different types of consumer products under CPSC's jurisdiction
July 27, 1993 Release # 93-097 PRODUCT: Almost 14,000 men's and women's 20-, 24-, and 26- inch Huffy bicycles distributed under the "Huffy" or "Sears Free Spirit" trademark. The affected bicycles were manufactured and distributed nationwide between February 1993 and March 1993. Affected models are listed on the attached news release. PROBLEM: Affected bicycles have a defect that may cause the plastic hand brake levers to break during use. If the lever breaks, the rider could fail to stop and fall from the bicycle. The bicycles also fail to meet the Federal Bicycle Standard that requires the hand brake levers to withstand a force up to 100 pounds. WHAT TO DO: Consumers who have an affected model should call the Huffy Bicycle Company at 888-366-3828 for free replacement brake levers. Consumers who do not wish to replace the levers themselves can ask for the location of the nearest Huffy Bicycle Company Authorized Service Center where the bicycle can be taken for a free inspection and brake lever replacement. Consumers should discontinue using affected bicycles until brake levers are replaced. WASHINGTON, DC -- CPSC, Huffy Bicycle Company, a division of Huffy Corporation, Dayton, OH is voluntarily recalling approximately 14,000 men's and women's 20-inch, 25-inch and 26-inch bicycles, manufactured and distributed nationwide between February 17, 1993 and March 15, 1993. During routine testing, Huffy found some of the bicycles' plastic hand brake levers contained a defect that may cause the levers to break during use. If the brake lever breaks, the rider could fail to stop and risk potential injury. The Federal Bicycle Standard requires that hand brake levers withstand a force up to 100 pounds. The bicycle models that have the defective levers bear either the "Huffy" or the "Sears Free Spirit" trademark. Models that may contain defective brake levers are identified by the model number and date of manufacture listed below. The date of manufacture code and model number are embossed into the crank housing of each bicycle. MODELS THAT MAY CONTAIN DEFECTIVE BRAKE LEVERS Model Model Numbers,Size and Name K4522 24" Z24 K4532 24" Mont Claire K4562 24" Night Heat K4572 24" Highland K4583 24" Sledge Hammer K6613 26" Expedition K6662 26" Titanium <td valign="middle" headers="Model"> K6672 26" Titanium 14642 24" Wild Slide 14652 24" Wild Slide 16653 26" Fastback 23583 20" Sledge Hammer 24253 24" Laurel Bay 24522 24" Mudslinger 24523 24" Snake River 24532 24" Double Take 24533 24" Pasadena 24563 24" Swamp Water 24603 24" Mojave Gulch 24612 24" Regatta 24613 24" Mojave Gulch 24623 24" Megaforce 24643 24" Z18 24653 24" Z18 26223 26" Silhouette 26622 26" Mojave Gulch 26623 26" Mojave Gulch 26632 26" Mojave Gulch 26643 26" Fire Mountain 26671 26" Stalker LX 26683 26" Thunder Ridge 26693 <td valign="middle" headers="Model Numbers, Size and Name"> 26" Thunder Ridge 34213 24" Essence 34253 24" Tropic Bay 34533 24" Street Heat 34563 24" Jack Hammer 34583 24" Shock Treatment 34603 24" Dirt Thrower 34613 24" Regatta 36612 26" Destroyer 36632 26" Mojave Ridge 36683 24" Sledge Hammer 44523 24" Force One 45533 24" Paradise 45543 24" Bull Run 44613 24" Regatta 44653 24" Z-18 44663 24" Tidal Water 46523 26" Cherokee 46533 26" Cherokee 46643 26" Snake Rock 46672 26" Key West 54602 24" Mt. Storm 54613 24" Mt. Storm 56563 26" America 56573 26" America 56603 </td> 26" Mt. Storm 56613 26" Mt. Storm 74533 24" Wild River 74623 24" Ultra Force 76683EF 26" Thunder Ridge 76693J 26" Thunder Ridge 76693EF 26" Thunder Ridge 84612 24" Key Largo 84623 24" Stomper 2 86203 26" Cross II 86213 26" Cross II 24583 24" Sledge Hammer 16643 26" Fastback 24233 24" Beverly Hills 26233 26" Silhouette 26603 26" Rock Trail 26613 26" Rock Trail 86623 26" Sandy Creek 86633 26" Sandy Creek 86673 26" Black Bear Date of manufacture codes that contain the defective brake levers are: 90483, 90493, 90503, 90533, 90543, 90553, 90563, 90573, 90603, 90613, 90623, 90633, 90643, 90673, 90683, 90693, 90703, 90713, and 90743. Some of the bicycles with the above date codes and model numbers were tested by Huffy and determined to have complying brake levers. These models have an American flag approval label with the "Huffy" name on a black background located high on the seat mast. Consumers who have both a bicycle model and a date of manufacture code date listed above and no American flag approval label on the bicycle should Call Huffy Bicycle Company at 888-366-3828 to receive replacement brake levers free of charge. Consumers who do not wish to replace the levers themselves can ask for the location of the nearest Huffy Bicycle Company Authorized Service Center where the bicycle can be taken for free inspection and brake lever replacement. Consumers should discontinue using affected bicycles until brake levers are replaced.Neither CPSC nor Huffy Bicycle Company is aware of any injuries involving these bicycles; this recall is being conducted to prevent the possibility of injury. The potentially hazardous bicycles were reported to CPSC by Huffy Bicycle Company. CPSC is announcing this replacement program as part of its mission to protect the public from unreasonable risk of injury and death associated with consumer products. The Commission's objective is to reduce the estimated 28.6 million injuries and 21,700 deaths associated each year with the 15,000 different types of consumer products under CPSC's jurisdiction
September 9, 1992 Release # 92-134 PRODUCT: Santa Fe Trading, Inc.'s 12-inch and 16-inch BMX sidewalk bicycles. PROBLEM: Both bicycles are equipped with only handbrakes; the 16-inch bicycle is also free-wheeling, which means the wheels operate independently of the pedal motion. Under Federal requirements, sidewalk bicycles may not be free-wheeling and may not have handbrakes only. WHAT TO DO: Consumers with these bicycles should contact the retail store where the bike was purchased and arrange for repairs which will bring the bikes into compliance. In lieu of repairs, consumers may also request a refund of the purchase price. WASHINGTON, DC -- In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Santa Fe Trading, Inc., Houston, TX is voluntarily recalling its 12- and 16- inch BMX sidewalk bicycles. Both bicycles are equipped only with hand-brakes and the 16-inch bicycle is also free-wheeling which means the wheels operate independently of the pedal motion. Under Federal requirements, sidewalk bicycles (bicycles with a seat height less than 25 inches in the highest adjustable position) may not be free-wheeling and may not have handbrakes only. Sidewalk bicycles that fail to meet these requirements present a significant risk of injury to a young child who might not be able to stop the bicycle with a handbrake. The sidewalk bicycles being recalled are: Name of the Product: 12-inch Sidewalk Bicycle Brand Name/Model #: BMX/901 Country of Origin: Taiwan Number of Units Sold: 146 Dates of Sale: May 27, 1992 - June 10, 1992 Distribution: Texas, Oklahoma, and Louisiana How Discovered: CPSC/Customs Surveillance Program at the Port of Houston Retail Price: Approximately $40.00 Name of the Product: 16-inch Sidewalk Bicycle Brand Name: BMX [no model number] Country of Origin: China Number of Units Sold: 172 Dates of Sale: April - June 1992 Distribution: Texas, Oklahoma How Discovered: Follow-Up CPSC Inspection Retail Price: Approximately $60.00 Consumers who have these bicycles should contact the retail store where the bicycle was purchased to arrange for repairs which will bring these bicycles into compliance. The handbrakes will also be removed from the 12-inch bicycle. The 16-inch bicycle will be retrofitted with a new seat post to raise the seat so that the bicycle will no longer be a "sidewalk" bicycle capable of being ridden by small children unable to use handbrakes. In lieu of these repairs, consumers may also request a refund of the purchase price. Neither CPSC nor the company is aware of any injuries involving these bicycles. This voluntary recall is being conducted to prevent the possibility of injury. Santa Fe Trading, Inc., is out of business, and therefore cannot be contacted about this recall. Consumers can only deal with the retail store where they bought the product.CPSC is announcing this recall as part of its mission to protect the public from unreasonable risks of injury and death associated with consumer products. The Commission's objective is to reduce the estimated 28.5 million injuries and 21,600 deaths associated each year with the 15,000 different types of consumer products under CPSC's jurisdiction
OCTOBER 8, 1991 Release # 92-004 Schwinn Xr-5 Exercisers Still Need Safety Modification Washington, DC -- Together with the U.S. Consumer Product Safety Commission (CPSC), Schwinn Bicycle Company of Chicago, IL is urging consumers who own a Schwinn XR-5 exerciser, manufactured between 1971 and 1977, to take part in a voluntary safety program if that unit was not modified in response to a previous safety notification involving 171,000 units in 1984. The response rate to the earlier program was low; Schwinn subsequently received 10 additional reports of injury, bringing the total number injured to 30. The reports received by Schwinn indicate that unsupervised children and infants have been injured when their fingers or toes got caught in the rear sprocket-chain juncture point on the left side of the XR-5 exerciser, resulting in amputation or other personal injury. There have also been reports of injuries occurring at the front sprocket-chain juncture point on the right side of unmodified units. As the manufacturer of this product, Schwinn is concerned about any type of injury allegedly associated with its products. As a result, Schwinn Bicycle Company is again offering to install or provide, at no charge, a Chainguard Retro Fit Kit that should help prevent potential harm to unsupervised children. If you own an XR-5, make sure small children do not play on or around your XR-5 unit. As indicated in the unit's owner's manual, when the unit is not in use, tighten the tension control knob located on the control panel so the pedals cannot be turned by small children, or place the unit in a locked or secure room. If you own an XR-5 unit which has not been modified, you should immediately make arrangements with your local authorized Schwinn dealer for installation of an XR-5 Chainguard Retro Fit Kit (part #90518). Installation will be done at no charge to the consumer. If you are unable to bring in your XR-5 unit, call Schwinn's Consumer Relations Department at 1-800-633-0231, and they will send you a Chainguard Retro Fit Kit so that you can install it yourself. However, Schwinn recommends that you have your authorized Schwinn dealer make the installation. If you sold or gave away your XR-5 unit, please let the new owner know of this safety program or call 1-800-633-0231 with the name and address of the person who now owns the unit and Schwinn will contact the new owner. For further information, please contact your local authorized Schwinn dealer or call 1-800-633-0231. The U.S. Consumer Product Safety Commission is announcing this modification program as part of its mission to protect the public from unreasonable risks of injury and death associated with consumer products. The Commission's objective is to help reduce the estimated 28.5 million injuries and 21,600 deaths that are associated each year with the 15,000 different types of consumer products under CPSC's jurisdiction
July 8, 1991 Release # 91-092 Scenique Toys, Inc. Recalls Teething Wheel WASHINGTON, DC -- In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Scenique Toys, Inc., San Francisco, CA is voluntarily recalling approximately 1,250 "Teething Wheel" teethers, model number SIL/893. When CPSC tested the Teething Wheel in accordance with regulations under the Federal Hazardous Substances Act, the dumbbell-shaped pieces positioned inside the wheel separated in half, creating small parts that pose a potential choking hazard for young children. The Teething Wheel consists of a white four-inch diameter ring; and four two-inch dumbbell-shaped pieces colored red, blue, green and yellow that are positioned through a clear plastic disk in the middle of the white ring. The clear plastic disk is embossed with the words "MADE IN CHINA." A label on the box reads "Produced By SCENIQUE TOYS INC., 645 Harrison Street, San Francisco, CA, 94107, USA, Made in China." The Teething Wheel, imported by Scenique Toys, Inc., was sold nationwide from February 1990 to July 1990 through various retail stores for an average retail price of $4.99 each. The CPSC and the company are aware of one non-injury incident involving this product. This voluntary recall is being conducted to prevent the possibility of any future injuries. The potentially hazardous Teething Wheel was identified during a follow-up to a consumer complaint made to CPSC. Consumers are urged to take the Teething Wheel away from young children immediately and return it to the store where purchased for a refund or they may mail the product to Scenique Toys, Inc., 645 Harrison Street, San Francisco, CA 94107 for a full refund of the purchase price and shipping costs. For more information about this recall, consumers may call the firm at 415-777-1188. The CPSC's mission is to protect the public from unreasonable risks of injury and death associated with consumer products. The CPSC is the Federal agency responsible for consumer product safety. Some 15,000 different types of consumer products fall within the Commission's jurisdiction and each year these products are involved in an estimated 29 million injuries and 22,000 deaths
May 28, 1991 Release # 91-077 Harco, Inc. Recalls Rescue Truck WASHINGTON, DC -- In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Harco, Inc., Tuscaloosa, AL is voluntarily recalling approximately 1,100 units of the "Rescue Truck" friction toys, model number 8115. When CPSC tested the trucks in accordance with regulations under the Federal Hazardous Substances Act, the truck wheels and rims separated and are small parts that pose a potential choking hazard for young children. The trucks are sold in three styles: a red fire truck, a blue police truck, and a white ambulance. Each vehicle is made of hard plastic and has a bear as the driver whose head nods back and forth when in motion. The trucks have yellow wheels with white rims and the friction on the rear wheels gives the trucks power to move. The license plate on the front bumpers bears the number 8115. The trucks measure four and one-half inches long, three inches wide, and three and one-half inches high. A label on the box reads "1987 Action Toys Co. Ltd. . . . Made in China." The statement "Action Toys, Made in China," is embossed in the bottom of the trucks. The trucks were sold in Alabama, Florida, and Mississippi at Harco Drug Stores from September 1990 to April 1991 for approximately $4.99 each. Neither the CPSC nor the company is aware of any injuries involving this product. This voluntary recall is being conducted to prevent the possibility of injury. Consumers are urged to take these toys away from young children immediately and return them to the store where purchased for a full refund of the purchase price. For more information about this recall, consumers may call the firm at 1-800-477-9138. The CPSC's mission is to protect the public from unreasonable risks of injury and death associated with consumer products. The CPSC is the Federal agency responsible for consumer product safety. Some 15,000 different types of consumer products fall within the Commission's jurisdiction and each year these products are involved in an estimated 29 million injuries and 22,000 deaths