Sewing Machines (Bernina) – Quality Check (1978)
Hazard assessment based on recall description.
This AI-generated summary is provided for general informational purposes only and is derived from publicly available recall notices. It supplements but does not replace official agency classifications or safety instructions.
Check Your Product
According to the U.S. Consumer Product Safety Commission (CPSC)
Product
Bernina Sewing Machines
Brand
Bernina
Lot Codes / Batch Numbers
Not specified in CPSC notice. Check official source for details.
Bernina is recalling Bernina Sewing Machines. Based on CPSC recall notice.
Summary derived from CPSC notice
Limited information available. Missing: hazard details, remedy information, UPC codes.
Reason for Recall
As stated by CPSC
June 28, 1978 Release # 78-056 Sewing Machine Quality Assurance Program Announced WASHINGTON, D.C. (June 28)-- Bernina Sewing Machines of Switzerland, in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced a voluntary corrective action program involving the Type 213 foot pedals of Bernina sewing machines manufactured between late 1969 and January, 1976. Sewing machine owners will be notified directly by the company and sent an easy- to-install kit, free of charge, to remedy the problem. The foot pedal (or speed regulator) of the sewing machine may overheat if a switch within the pedal remains in a "closed" position. This may increase the possibility of a short circuit or fire in the pedal. As a safety precaution, owners are urged to unplug the machine when not in use and to avoid placing foreign objects on or near the foot pedal. According to Bernina, no injuries have been reported in connection with the sewing machines sold with this foot pedal. To correct the overheating problem, Bernina is offering a thermally activated switch for all the Type 213 black foot pedals. This number is stamped on the bottom of the foot pedal. (Those pedals stamped with a blue "T" already contain the thermally activated switch.) Bernina is identifying and contacting the owners of these sewing machines by letter to advise them that the thermally activated switch should be installed without delay. In addition, Bernina retailers will assist any consumer having difficulty in replacing the switch and have posted in-store notices explaining the problem. Consumers with the Type 213 foot pedals should contact their local Bernina retailer or any of Bernina's four American distributors if they have not been notified by the company or if they have questions concerning the recall program. The four American distributors are: Larson Bernina Corporation, 2017 E. 38th Street, Minneapolis, MN 55407; Swiss-Bernina Inc., 534 W. Chestnut Street, Hinsdale, IL 60521; Bernina Sewing Machine Company, Inc., 70 Orchard Drive, North Salt Lake, UT 84054; and Bernina Distributors, Inc., 2401 S. Hill Street, Los Angeles, CA 90007
Recommended Action
Per CPSC guidance
The CPSC advises consumers to stop using the product. Contact the manufacturer or return the product to the place of purchase.
Verify this information on the official source
For complete details and official instructions, check the U.S. Consumer Product Safety Commission (CPSC) directly.
View official CPSC recall noticePage updated: Jan 6, 2026