Child Craft Stationary-Side Cribs (Child Craft) – entrapment risk (2010)
Hazard assessment based on recall description.
This AI-generated summary is provided for general informational purposes only and is derived from publicly available recall notices. It supplements but does not replace official agency classifications or safety instructions.
Check Your Product
According to the U.S. Consumer Product Safety Commission (CPSC)
Product
Child Craft brand "Crib 'N' Double Bed" full size stationary-side cribs with dowel
Brand
Child Craft Industries, Inc. (Child Craft ceased operations in July of 2009 and sold the "Child Craft" name to Foundations Worldwide Inc., of Medina, Ohio) Foundations Worldwide, Inc. neither manufactured nor sold any of the cribs included in this recall.
Lot Codes / Batch Numbers
Not specified in CPSC notice. Check official source for details.
Product Images
Source: U.S. Consumer Product Safety Commission
Child Craft Industries, Inc. (Child Craft ceased operations in July of 2009 and sold the "Child Craft" name to Foundations Worldwide Inc., of Medina, Ohio) Foundations Worldwide, Inc. neither manufactured nor sold any of the cribs included in this recall. is recalling Child Craft brand "Crib 'N' Double Bed" full size stationary-side cribs with dow. The hazard is: The cribs' stationary side can be assembled upside-down but still appear to be assembled correctly. . Based on CPSC recall notice.
Summary derived from CPSC notice
The following details were not provided by CPSC: UPC codes.
Reason for Recall
As stated by CPSC
All Child Craft brand cribs with the foot top dowel (as shown in the photos) including, but not limited to, the following model: Name: Child Craft convertible cribs Model Number F36101. The name "Child Craft" appears on a label on the crib's frame and identifies the place of manufacture as Salem, Indiana or New Salisbury, Indiana. These cribs were manufactured by Child Craft Industries, Inc., which is no longer in business.
Reported concern (CPSC)
The cribs' stationary side can be assembled upside-down but still appear to be assembled correctly. If assembled upside-down, the crib side contains a hazardous five-inch gap at the top of the crib. Infants or toddlers can become entrapped in this gap (as depicted in the photo), which can lead to entrapment, strangulation or other injuries.
Recommended Action
Per CPSC guidance
The CPSC staff urges parents and caregivers to examine these cribs immediately and determine whether they have been assembled properly. The best way to do this is to measure the gap between the front and back sides of the crib and the dowel that runs parallel to the sides. The gap should be no more than two and three eighths inches (2 3/8"), as shown in the images. If the gap is greater than 2 3/8", the side has been installed upside-down and needs to be re-assembled. Another indicator that the side has been installed improperly is the appearance of the barrel nut, as is visible in the image showing an incorrect assembly. The barrel nut should be at the bottom of the side, not the top. If either of these conditions are present, the side of the crib has been installed upside-down and needs to be re-assembled so that the barrel nut is not visible from the top and the gap between the dowel and the side is no greater than two and three eighths inches (2 3/8"). Consumers with these cribs should contact Foundations Worldwide, Inc., to obtain instructions and decals to affix to the stationary sides of the crib to ensure proper assembly in the future.
Verify this information on the official source
For complete details and official instructions, check the U.S. Consumer Product Safety Commission (CPSC) directly.
View official CPSC recall noticePage updated: Jan 6, 2026