T2 Electrical Voltage Testers (Fluke) – safety concern (1999)

Check Your Product

According to the U.S. Consumer Product Safety Commission (CPSC)

Reason for Recall

As stated by CPSC

Electrical Testers Recalled by Fluke NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE November 9, 1999 Release # 00-014 Company Phone Number: (800) 753-8646 CPSC Consumer Hotline: (800) 638-2772 CPSC Media Contact: Ken Giles, (301) 504-7052 CPSC, Fluke Corp. Announce Second Recall of Electrical Testers WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Fluke Corp., of Everett, Wash., is voluntarily recalling about 58,000 model T-2 hand-held electrical voltage and continuity testers. The batteries in the tester could fail to maintain proper contact due to corrosion within the battery compartment, causing the device to lose power. Consumers testing electrical sources could fail to be warned of the presence of live current if the tester is not powered, posing a risk of shock, electrocution, and thermal burns. Fluke conducted a previous recall in November 1998 on T2 Electrical Testers because of a different electrical connection problem. Even if consumers had their testers repaired previously, their testers are part of this new recall and need to be repaired again. Fluke is aware of two incidents involving these testers where consumers received a mild electric shock. These testers measure 24 to 600 volts alternating current (VAC), and 6 to 220 volts direct current (VDC). "Fluke" and "T2" are written on the front of the unit. The tester body is yellow and black, and measures about 6.25 inches long by 1.75 inches wide and 1.25 inches thick. The wire leads are black and have one black and one red probe. Recalled units have a serial number lower than 74165430. The serial number is located on the back of the unit above the wire leads. Home centers, hardware stores and industrial distributors nationwide sold these testers between December 1997 and September 1999 for about $45. Consumers should stop using these voltage and continuity testers immediately, and contact Fluke to obtain a free repair kit or arrange to send your unit to Fluke for repair. For information on returning your unit to Fluke or obtaining a repair kit, consumers should call Fluke toll-free at (800) 753-8646 between between 5 a.m. and 4 p.m. PT Monday through Friday. Consumers can access Fluke's web site at www.fluke.com/whatsnew/ProductNotices/notices_99-10-01.asp.

Recommended Action

Per CPSC guidance

The CPSC advises consumers to stop using the product. Contact the manufacturer or return the product to the place of purchase.