Fuel Sentry Controls (Fuel Gard) – Device Warning (1979)
Hazard assessment based on recall description.
This AI-generated summary is provided for general informational purposes only and is derived from publicly available recall notices. It supplements but does not replace official agency classifications or safety instructions.
Check Your Product
According to the U.S. Consumer Product Safety Commission (CPSC)
Product
Activators Fuel Sentry thermostat controls
Brand
Fuel Gard
Lot Codes / Batch Numbers
Not specified in CPSC notice. Check official source for details.
Fuel Gard is recalling Activators Fuel Sentry thermostat controls. The hazard is: Fire & Fire-Related Burn. Based on CPSC recall notice.
Summary derived from CPSC notice
The following details were not provided by CPSC: remedy information, UPC codes.
Reason for Recall
As stated by CPSC
Energy-Saving Devices Warned NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE October 15, 1979 Release # 79-058 Consumers Warned On Dangerous Energy-Saving Devices WASHINGTON, D.C. (Oct. 15) -- Citing the critical need for consumers to save energy safely, the U.S. Consumer Product Safety Commission today warned consumers to stop using two types of faulty energy-saving devices which regulate home thermostats. Approximately 20,000 "Automatic Day/Night" thermostat controls were manufactured by the Fuel Sentry Corporation of Mt. Vernon, New York. An additional 19,500 "Home Energy Saver" thermostat controls were manufactured by the Fuel Gard Corporation of Glastonbury, Connecticut. Both types of potentially hazardous devices consist of a small rectangular heater and an electric timer. The heaters were designed to be mounted on the wall beneath the thermostat and connected to the electrical timer which plugs into a household socket. At predesignated times, the heater warms the thermostat, causing it to shut off the home furnace. The heaters were manufactured with integral carbon resistors which may overheat and start fires. The defective heaters have caused at least 17 instances of sparking or flaming since July, 1977. In two instances, the adhesive backing of the heater melted, causing the heater to fall to the floor onto combustible materials. No injuries have been reported. CPSC staff believes the timers can be used safely with other appliances. The thermostat controls were sold nationwide in hardware and department stores for retail prices ranging from $20 to $25 Some of the Fuel Gard units were given away for promotional purposes. Details Of Fuel Sentry Alert The potentially hazardous Fuel Sentry heaters were manufactured between September, 1976 and August, 1977, and between November, 1977 and May, 1978. They are labeled "Activator" on the front and display a date code on the back which falls within the following ranges: 396 through 526; 017 through 327; 437 through 527; and 018 through 218. In addition, only "Activators" containing a brown-colored carbon resistor (visible through the key-hole slot in the back) are potentially hazardous. Units with resistors of another color are believed to be safe, even though they may carry one of the date codes listed above. Fuel Sentry announced a recall of their product in 1978, but fewer than half the units were returned by consumers. The company since has filed for bankruptcy and is no longer repairing the devices. Owners of affected Fuel Sentry thermostat controls should return the products to their retailers, many of whom are offering refunds or replacements. Owners of Fuel Sentry units who cannot obtain a refund or replacement unit from retailers should contact CPSC's toll-free Hotline at 800/638-2772. Fuel Gard Alert The Fuel Gard heaters were manufactured with a simulated wood finish and were labeled "Fuel Gard" in raised lettering. CPSC staff is working to develop a corrective program with Fuel Gard to enable consumers to return defective units; details will be announced in a subsequent press release. Save Energy Safely CPSC staff warns consumers that energy-conservation devices which are improperly installed, designed or manufactured can result not only in fire hazards, but also in carbon monoxide poisoning, electrical shocks or explosions. CPSC staff will continue to monitor the marketplace to detect defective products which should be recalled, but urges consumers to be alert to the potential safety problems of devices such as furnace vent dampers, flue gas recirculators, clothes dryer exhaust diverters and other modifications to existing energy equipment and appliances.
Reported concern (CPSC)
Fire & Fire-Related Burn
Recommended Action
Per CPSC guidance
The CPSC advises consumers to stop using the product. Contact the manufacturer or return the product to the place of purchase.
Verify this information on the official source
For complete details and official instructions, check the U.S. Consumer Product Safety Commission (CPSC) directly.
View official CPSC recall noticePage updated: Jan 6, 2026