Dual Sensor Smoke Alarms (Kidde) – potential failure (2018)

Check Your Product

According to the U.S. Consumer Product Safety Commission (CPSC)

Product Images

Source: U.S. Consumer Product Safety Commission

1/3

2/3

3/3

Reason for Recall

As stated by CPSC

This recall involves models PI2010 and PI9010 of Kidde dual sensor (photoelectric and ionization) smoke alarms. "KIDDE" is printed on the front center of the smoke alarm. The model number and date code are printed on the back of the alarm. Model Date Code PI9010 (DC/battery powered) 2016 Sep. 10 through 2017 Oct. 13 PI2010 (AC/hardwired) 2016 Sep. 10 through 2017 Oct. 13

Recommended Action

Per CPSC guidance

Consumers should remove the alarm from the wall/ceiling and visually inspect it through the opening on the side of the alarm for the presence of a yellow cap. Consumers should not attempt to take apart the alarm, open the casing, or otherwise remove the yellow cap themselves. If a yellow cap is present, the consumer should immediately contact Kidde to receive instructions and request a free replacement smoke alarm. They should remove and discard the recalled smoke alarm only after they receive and install the replacement alarm. If no yellow cap is present, consumers should reinstall the smoke alarm and no further action is needed.