Scuba Diving Air Hoses (A-Plus Marine) – Drowning Risk (2013)
Check Your Product
According to the U.S. Consumer Product Safety Commission (CPSC)
Product
High-pressure scuba diving air hoses
Lot Codes / Batch Numbers
Not specified in CPSC notice. Check official source for details.
Product Images
Source: U.S. Consumer Product Safety Commission
A manufacturer is recalling High-pressure scuba diving air hoses. The hazard is: The diving hose that connects the regulator to the tank's pressure gauge can separate reducing the a. Based on CPSC recall notice.
Summary derived from CPSC notice
The following details were not provided by CPSC: UPC codes.
Reason for Recall
As stated by CPSC
The recalled air hoses are high-pressure scuba air hoses with a black, smooth rubber outer covering. They are about half a centimeter in diameter and 32 or 36 inches long. These hoses connect the regulator to the tank pressure gauge. The phrase "Scuba Diving High Pressure hose I.D. 3/16" (4.76 mm) W.P. 5000 PSI Exceeds SAE 100RT braid with Kevlar fiber from Dupont" is printed in white lettering on the hose's outer covering. The hoses have metal fittings on each end. "CE EN 250 230" is stamped on the female side of the fitting and "12Q1" on the male side.
Reported concern (CPSC)
The diving hose that connects the regulator to the tank's pressure gauge can separate reducing the available air supply to the diver, posing a drowning hazard.
Recommended Action
Per CPSC guidance
Consumers should immediately stop using the hoses and contact A-Plus Marine for a free replacement hose.
Verify this information on the official source
For complete details and official instructions, check the U.S. Consumer Product Safety Commission (CPSC) directly.
View official CPSC recall noticePage updated: Jan 6, 2026