BLT Series Luminaires (Lithonia Lighting) – Injury Risk (2016)

Check Your Product

According to the U.S. Consumer Product Safety Commission (CPSC)

Product Images

Source: U.S. Consumer Product Safety Commission

1/3

2/3

3/3

Reason for Recall

As stated by CPSC

This recall involves Lithonia Lighting BLT series luminaires intended for use in indoor, commercial applications, such as office buildings, schools and stores. The low-profile, recessed LED luminaire is a metal light fixture in a white finish with a rounded or square plastic lens. The fixtures measure about 1, 2 or 4 feet long and 1, 1.5 or 2 feet wide. Only non-sensor luminaires with a manufacture date from October 2015 through August 2016 are included in this recall. Lithonia Lighting, the model and date of manufacture can be found on a label attached to the fixture's housing and on the product packaging. The date code on the fixture's housing's label is in a MM/DD/YY format. The date code on the packaging is in a YYYY/MM/DD format.

Recommended Action

Per CPSC guidance

Consumers should remove the lens and contact Lithonia Lighting to receive a free repair kit to secure the original lens. Consumers should prevent people from going into the immediate area under the fixtures until the lenses are removed or the luminaires are repaired. A video showing proper lens removal and installation of the repair kit is available at the firm's website at www.lithonia.com/bltvideo