Philips Medical Systems North America Co. Phillips ALLURA XPER FD20 The intended uses of the Allura XPER X-ray systems involved with this report are angiographic X-ray systems with a solid state x-ray imaging device for cardiovascular and vascular diagnostic and interventional procedures. Recall
Check Your Product
According to the U.S. Food and Drug Administration (FDA)
Product
ALLURA XPER FD20 The intended uses of the Allura XPER X-ray systems involved with this report are angiographic X-ray systems with a solid state x-ray imaging device for cardiovascular and vascular diagnostic and interventional procedures.
Brand
Philips Medical Systems North America Co. Phillips
Lot Codes / Batch Numbers
Site numbers: 41443700, 41444446, 41444463, 41445125, 41445246, 41445254, 41445255, 41445256, 41445336, 41445427, 41445434, 41445578, 41445804, 41446150, 41586608, 41792527, 42063953, 42066520, 42225697, 42478916, 42635423, 42635426, 42812038, 42892018, 42892474, 42919054, 43082276, 43120325, 43165011, 43209312, 43209348, 43263118, 43340698, 43392727, 43420965, 43421081, 43433587, 43443629, 43445198, 43594036, 43594037, 43622121, 43704085, 43721256, 43973609, 43973613, 44004308, 44004309, 44038398, and 43592438.
Products Sold
Site numbers: 41443700, 41444446, 41444463, 41445125, 41445246, 41445254, 41445255, 41445256, 41445336, 41445427, 41445434, 41445578, 41445804, 41446150, 41586608, 41792527, 42063953, 42066520, 42225697, 42478916, 42635423, 42635426, 42812038, 42892018, 42892474, 42919054, 43082276, 43120325, 43165011, 43209312, 43209348, 43263118, 43340698, 43392727, 43420965, 43421081, 43433587, 43443629, 43445198, 43594036, 43594037, 43622121, 43704085, 43721256, 43973609, 43973613, 44004308, 44004309, 44038398, and 43592438.
Philips Medical Systems North America Co. Phillips is recalling ALLURA XPER FD20 The intended uses of the Allura XPER X-ray systems involved with this report are an due to The Printed Circuit Board (PCB) in the Main-cabinet. Further investigation revealed that a manufacturing error in the PCB is responsible for the reli. Based on FDA medical device recall database.
Summary derived from FDA notice
Reason for Recall
As stated by FDA
The Printed Circuit Board (PCB) in the Main-cabinet. Further investigation revealed that a manufacturing error in the PCB is responsible for the reliability issue. As a result, the complete system may shut down and not re-start.
Recommended Action
Per FDA guidance
Philips began mailing out an URGENT-Device Correction letter on May 26, 2009. Philips sent out a second URGENT-Device Correction letter dated June 4, 2009, to all consignees. The letter identified the product, the problem, and the action to be taken by the consignee. Consignees were advised to contact their local Philips representative immediately if their system completely shut down and would not restart. A mandatory Field Change Order 72200144 was issued for replacement of the Printed Circuit Board (PCB) in the Allura XPER FD system. A mandatory Field Change Order FCO 70800091 was issued for replacement of the Printed Circuit Board (PCB) in the MultiDiagnost Eleva with FD system. The consignees were to be contacted by their Philips Representative for implementation of the corrective action. The firm's Field Engineer would replace the power tray of the systems. If the consignees needed any further information or support concerning this issue, they were to contact the call Center at 800-722-9377, # 5 and reference FCO 72200144 or FCO 70800091 with any questions.
Verify this information on the official source
For complete details and official instructions, check the U.S. Food and Drug Administration (FDA) directly.
View official FDA recall noticePage updated: Jan 10, 2026