Philips North America, LLC EasyDiagnost Eleva DRF, model no. 706050 - Product Usage: X-ray system, diagnostic, general-purpose. Recall
Check Your Product
According to the U.S. Food and Drug Administration (FDA)
Product
EasyDiagnost Eleva DRF, model no. 706050 - Product Usage: X-ray system, diagnostic, general-purpose.
Brand
Philips North America, LLC
Lot Codes / Batch Numbers
Not specified in FDA notice. Check official source for details.
Products Sold
Serial Numbers SN16000004 SN17000018 SN17000020 SN17000025 SN17000026 SN18000002 SN18000004 SN18000005 SN16000002 SN16000006 SN16000011 SN16000013 SN16000017 SN16000022 SN16000025 SN16000028 SN16000029 SN16000030 SN16000031 SN16000036 SN16000037 SN16000039 SN16000041 SN16000042 SN16000043 SN16000044 SN16000045 SN16000048 SN16000054 SN16000056 SN17000001 SN17000006 SN17000008 SN17000015 SN17000017 SN17000019 SN17000021 SN17000023 SN17000027 SN17000028 SN17000029 SN17000031 SN17000032 SN17000033 SN17000034 SN17000035 SN17000036 SN17000037 SN17000038 SN18000001 SN18000003 SN18000009
Philips North America, LLC is recalling EasyDiagnost Eleva DRF, model no. 706050 - Product Usage: X-ray system, diagnostic, general-purpose. due to Thermo switches in the main power supply for the system may be incorrectly installed, resulting in a malfunction.. Based on FDA medical device recall database.
Summary derived from FDA notice
Reason for Recall
As stated by FDA
Thermo switches in the main power supply for the system may be incorrectly installed, resulting in a malfunction.
Recommended Action
Per FDA guidance
The firm distributed Urgent Field Safety Notice letters to affected customers on 6/2/2020. Customers were informed that the thermos switches may be incorrectly installed which results in a malfunction. If the transformer overheats due to a failure and the thermos switch is not activated, the device may begin to generate smoke. Customers were advised by the firm that they can use the system according to the IFU (Instruction for Use). The user should pay attention to whether it smells of smoke in the room. If this is the case, immediately shut down the system according to IFU or (if present) use emergency off switch in room, remove patient, stop using the system for further examinations and contact customer service. Philips plans to perform an On-Site check of the SPDU thermo contact at affected systems, which will eliminate these issues. Should you need to communicate with Philips with regard to this program, please reference Field Change Order 70600103. If you need any further information or support concerning this issue, please contact your local Philips representative.
Verify this information on the official source
For complete details and official instructions, check the U.S. Food and Drug Administration (FDA) directly.
View official FDA recall noticePage updated: Jan 10, 2026