Siemens Medical Solutions USA, Inc SOMATOM Confidence with software syngo.CT VB20 Model #10590100 Recall
Check Your Product
According to the U.S. Food and Drug Administration (FDA)
Product
SOMATOM Confidence with software syngo.CT VB20 Model #10590100
Brand
Siemens Medical Solutions USA, Inc
Lot Codes / Batch Numbers
Not specified in FDA notice. Check official source for details.
Products Sold
Serial Numbers: 100172 100091 100112 100362 100278 100158 100143 100129 100237 100238 100191 100356 100425 100216 100307 100325 100328 100329 100326 100239 100213 100070 100062 100072 100022 100107 100241 100157 100055 100340 100347 100137 100267 100190 100252 100438 100197 100092 100202 100313 100311 100043 100136 100189 100283 100156 100079 100049 100056 100147 100262 100018 100240 100117 100097 100274 100242 100099 100383 100059 100289 100312 100174 100073 100016 100182 100146 100058 100175 100292 100090 100271 100463 100257 100273 100067 100160 100218 100367 100087 100309 100284 100207 100405 100261 100025 100338 100272 100053 100019 100421 100280 100357 100220 100214 100393 100394 100140 100085 100279 100254 100353 100298 100379
Siemens Medical Solutions USA, Inc is recalling SOMATOM Confidence with software syngo.CT VB20 Model #10590100 due to software syngo.CT VB20 in the installed base, with or without syngo.CT software versions VB20_SP1, SP2, SP3, or SP4, may result in workflow interrupt. Based on FDA medical device recall database.
Summary derived from FDA notice
Reason for Recall
As stated by FDA
software syngo.CT VB20 in the installed base, with or without syngo.CT software versions VB20_SP1, SP2, SP3, or SP4, may result in workflow interruptions resulting in the delay in diagnosis, the necessity for patient rescans, and/or the need for additional contrast media may occur
Recommended Action
Per FDA guidance
Siemens Medical Solutions USA, Inc. initiated a Customer Safety Advisory Notice (CSAN) to customers via CT021/21/S on 8/30/2021. The CSAN informs the customer of the issues health risk, the new software update version VB20_SP5 to eliminate the root causes of these problems. The software update will be distributed free of charge via CT020/21/S and CT071/21/S (update is dependent on the current software version) to all affected customers. Action to take: Siemens Healthineers has developed software update syngo.CT VB20 SP5. This new software contains workflow improvements and solutions to the previously described software issues. Please ask your local service organization if you are interested in more detailed information about the content of the software update. The new software, VB20_SP5, will be provided free of charge and will be distributed via Update CT020/21/S or CT071/20/S. Update CT071/20/S is only necessary if the system is being updated from software version VB20, VB20_SP1, or VB20_SP2 directly to VB20_SP5. Following the corrective action process CAPA, the cause of identified product issues has been eliminated and a recurrence of the identified issues is prevented. This update will be performed remotely. The remote software updates process will require approximately 45 minutes for completion and is completely automatic; however, please make sure the system and power are stable before and during the process, please do not switch off the system during the update process. Siemens highly recommends starting the installation when the scanner will not be in use or when the necessary time for the update to be completed can be scheduled. If you have any questions, please contact our service organization at at 1-800-888-7436. Please review, understand, and confirm acknowledgement of the information and instructions outlined in this Urgent Safety Advisory Notice. By signing this document, you are acknowledging that you have read and understand the content therein
Verify this information on the official source
For complete details and official instructions, check the U.S. Food and Drug Administration (FDA) directly.
View official FDA recall noticePage updated: Jan 10, 2026