Loading...
Loading...
All product recalls affecting Alabama.
Includes nationwide recalls (tagged “Nationwide”) and recalls with Alabama in the distribution area.
GE HealthCare has become aware that complete electrical safety testing was not conducted during manufacturing of certain Giraffe and Panda iRes Warmers. There are multiple electrical safety protections included in the product design. However, because the electrical safety testing in manufacturing was incomplete for these devices, there is the potential for leakage current to exceed IEC 60601 limits.
Ford Motor Company (Ford) is recalling certain 2023-2024 Transit vehicles. The steering column intermediate shaft may have been secured to the steering gear pinion shaft with an incorrect bolt, which can result in the separation of steering components and cause a loss of steering control.
Ford Motor Company (Ford) is recalling certain 2024 Mustang vehicles. The rear suspension knuckles may have a casting defect that causes them to fail, which can result in a loss of vehicle handling and steering control.
Failed Impurities/Degradation Specifications: Product failed impurity specifications at the 18-month stability testing.
Due to customer complaints and out of box failures, the firm is conducting a voluntary recall as a result of product failures (cracks and over-molding separation of the sterilizable internal defibrillation paddles.
This recall involves Samsung Electric Slide-In Ranges with the model numbers below. The model number is located on the ranges on the inside upper left corner of the oven door or inside the storage bin located on the bottom of the oven. Recalled Model Numbers NE58K9430SS/AA NE58N9430SG/AA NE58R9431SG/AA NE58R9431SS/AA NE58R9431ST/AA NE58F9500SS/AA NE58K9500SG/AA NE58F9710WS/AA NE58K9850WS/AA NE58K9850WG/AA NE58K9852WG/AA NE58H9950WS/AA NE58R9311SS/AA NE63T8111SG/AA NE63T8111SS/AA NE63T8311SG/AA NE63T8311SS/AA NE63BG8315SSAA NE63CB831512AA NE63BB851112AA NE63T8511SG/AA NE63T8511SS/AA NE63T8511ST/AA NE63A8711QN/AA NE63BB871112AA NE63T8711SG/AA NE63T8711SS/AA NE63T8711ST/AA NE63T8751SG/AA NE63T8751SS/AA
The National Institute of Standards and Technology (NIST) has identified in the National Vulnerability Database (NVD) that NexGen Healthcare Mirth Connect, prior to version 4.4.1, has a potential vulnerability allowing the deserialization of untrusted data (CVE-2023-43208). Mirth products may have been installed and configured with your ViewPoint / ViewPoint 6 system by GE HealthCare. This vulnerability could allow a malicious actor to access the system and potentially manipulate patient data.
Potential for product leakage from the Spin Lock Connector on the distal end of the device due to the migration of excess solvent during the assembly process.
Mislabeled: Incorrect sleeve in the packaging. The outer packaging is labeled as a standard neck sleeve, however, the product within the box is a -6mm neck sleeve, and vice versa. The neck of the sleeve can be identified by the device etching as either STD or -6
a. A small number of Fusion Pro 24 units were released with an incorrectly placed Interlock device. As a result, the system can be operated with the front-loading door in an open position. b. Fails to comply with Class 2 designation, indicated in Part 6 of Laser Product Report. An incorrectly placed Interlock device can allow Class 4 laser radiation fields during operation.
A half-threaded bolt was included in the LTE kits instead of the correct full-threaded bolt.
Chrysler (FCA US, LLC) is recalling certain 2024 Jeep Wrangler vehicles. The vehicles are equipped with incorrect tail lights that may be obstructed by the spare tire. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."
General Motors, LLC (GM) is recalling certain 2023-2024 Cadillac LYRIQ all-wheel drive vehicles. The anti-lock brake system (ABS) may activate unexpectedly and release brake pressure in the vehicle's service brake system.
BMW of North America, LLC. (BMW) is recalling certain 540d xDrive vehicles that were previously repaired under recall number 22V-614. The exhaust gas recirculation (EGR) cooler may leak internally, causing coolant to mix with diesel engine soot, which could result in smoldering particles and a melting intake manifold.
This recall involves SMEG-branded, retro style refrigerators with freezer, with model numbers starting with FAB38U. The special-order refrigerators measure about 28 inches wide, 30 inches deep and 80 inches high, and were sold in black, cream, pastel blue, pastel green, red and white, with either left-opening or right-opening doors with handles. The refrigerators have three adjustable glass shelves and two drawers. The bottom freezer has a separate door and three drawers. "SMEG" is on the front of the refrigerator, and "Made in Italy", the model, and serial numbers that begin with 2781 are printed on a white label inside of the refrigerator's top door.
Chrysler (FCA US, LLC) is recalling certain 2024 Jeep Grand Cherokee L vehicles. The child seat tether welds on the second-row seat back frame may be insufficient, which can reduce the seat's ability to properly restrain a child during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 225, "Child Restraint Anchorage Systems."
General Motors, LLC (GM) is recalling certain Buick Envision all-weather floor mats with part number 85647097, that may have been installed in certain 2024 Buick Envision vehicles. The accelerator pedal may become trapped under the floor mat, which can result in unintended acceleration.
Firm has developed a software correction (Revision D.00) outside the US to mitigate product problems that pose a risk of hemodynamic instability and failure of transmission of clinical data in Cardiosave Hybrid and Cardiosave Rescue Intra-Aortic Balloon Pump devices.
Machines equipped with BPM3 Blood Pressure Modules (Blood pressure monitor TM-2917B with firmware version S005) will not record Blood Pressure measurements and does not alarm if the cuff tubing is kinked close to the cuff.
This recall involves one production batch of Finger-Ease Guitar String Lubricant. The product is a clear aerosol spray sold in a white-color steel can with a black cap. The product measures about 1.5 inches long, 1.5 inches wide and 6 inches tall, and weighs about 4.5 ounces. The product has a picture of a brown guitar with the words "Tone Finger Ease Guitar String Lubricant" in brown, black and red lettering. There is a red horizontal stripe on the can. Printed on the can is "Manufactured by Chem-Pak, Inc.", and the production batch code is printed in black ink on the bottom of the steel container with model number 220B and lot code 106824.