Loading...
Loading...
All product recalls affecting Georgia.
Includes nationwide recalls (tagged “Nationwide”) and recalls with Georgia in the distribution area.
Baby Pacifiers Continues Recalled by La Cibeles NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE June 1976 Release # 76-041 CPSC Recall Of Baby Pacifiers Continues WASHINGTON, D.C. -- The U.S. Consumer Product Safety Commission in cooperation with La Cibeles, Inc., of Union City, New Jersey, has again announced that approximately 38,000 baby pacifiers which may pose a substantial product hazard may still be in the hands of consumers. This is the second public notification to be made in cooperation with La Cibeles, Inc., in an attempt to remove this potential hazard from the marketplace. The pacifiers known as Chupetes are marketed in four series marked "Fauna," "Flower," "Texas," and "Navy." They are imported from Spain and are usually sold in plastic and cardboard casings with pictures on the backing and the name of the series in large letters on the top. The pacifier sells for about 45 cents ($.45). Approximately 130,000 of the original 168,000 have been returned to La Cibeles since February 1976. The Commission learned of the hazard through the death of a five-month-old boy in New York in mid-February. The plastic shield caught in the child's throat and death was caused by complications ensuing from asphyxia. The pacifiers are approximately two inches long with a one-inch soft rubber nipple and a flexible plastic saucer-shaped shield at the base of the nipple approximately one-and-one-half inches in diameter. The handle of the pacifier is in the shape of either an animal head, a flower, a baby with a cowboy hat or a baby with a sailor cap. The shield is marked Wade in Spain" in small molded letters. They are usually displayed for sale on a large cardboard sign with markings similar to those on the package. The word "Chupete" appears on the display. The pacifiers have been distributed in New York, New Jersey, Connecticut, Maryland, Florida and Puerto Rico. Consumers who suspect they may have purchased one of these pacifiers should immediately remove it from the child's possession and return it to the place of purchase for a refund. For further information, consumers should call the Consumer Product Safety Commission's toll-free hotline at 800/638-2772. This press release is available in Spanish through the Office of Public Affairs.
Arc Welders Recalled NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE July 16, 1976 Release # 76-043 CPSC Announces Recall Of 250,000 Arc Welders Due To Shock Hazard WASHINGTON, D.C. (July 16) -- The U.S. Consumer Product Safety Commission today announced the recall of 250,000 electric arc welders made by Western Manufacturing and Supply Company of Kearny, Nebraska, since 1950. The welders, sold by mail order for from $9.95 to $14.95 each, may pose a substantial hazard in the form of electric shock and skin burns. The recall is a requirement of an order issued pursuant to a consent agreement accepted by the Commission under Section 15 of the Consumer Product Safety Act. Western Manufacturing and Supply Company, also known a Midway Sales, Inc., has discontinued production of the welders and has stopped all sale of the units, known as Midway Electric Arc Welders, that were made without electrical isolation. The CPSC found that the construction of the unit allowed the power supply voltage to reach the electrodes directly in a way that could result in a shock for anyone coming in contact with the electrodes or a piece of metal in contact with the electrodes. In addition, the welder's metal housing lacked thermal insulation, posing a threat of severe skin burns. The welder instructions also stated that fuses with a 30 ampere capacity should be substituted for 15 or 20 ampere household fuses in circuit to which the welder was attached. The welder unit was sold with an assortment of electrodes, an eye shield and printed materials. The name Midway appears on the face plate. Model numbers include DD, D, E, F, DS, and K. Consumers who have these welders should mail them directly to Western Manufacturing and Supply Company, 1400 West 22nd Street, Kearny, Nebraska 68847, Attention : Mr. P. Beshore, with a note indicating the consumer's return address and cost for postage. A full refund for the welder will be returned to the consumer along with the cost of postage.
July 16 1976 Release # 76-043 WASHINGTON, D.C. (July 16) -- The U.S. Consumer Product Safety Commission today announced the recall of 250,000 electric arc welders made by Western Manufacturing and Supply Company of Kearny, Nebraska, since 1950. The welders, sold by mail order for from $9.95 to $14.95 each, may pose a substantial hazard in the form of electric shock and skin burns. The recall is a requirement of an order issued pursuant to a consent agreement accepted by the Commission under Section 15 of the Consumer Product Safety Act. Western Manufacturing and Supply Company, also known a Midway Sales, Inc., has discontinued production of the welders and has stopped all sale of the units, known as Midway Electric Arc Welders, that were made without electrical isolation. The CPSC found that the construction of the unit allowed the power supply voltage to reach the electrodes directly in a way that could result in a shock for anyone coming in contact with the electrodes or a piece of metal in contact with the electrodes. In addition, the welder's metal housing lacked thermal insulation, posing a threat of severe skin burns. The welder instructions also stated that fuses with a 30 ampere capacity should be substituted for 15 or 20 ampere household fuses in circuit to which the welder was attached. The welder unit was sold with an assortment of electrodes, an eye shield and printed materials. The name Midway appears on the face plate. Model numbers include DD, D, E, F, DS, and K. Consumers who have these welders should mail them directly to Western Manufacturing and Supply Company, 1400 West 22nd Street, Kearny, Nebraska 68847, Attention : Mr. P. Beshore, with a note indicating the consumer's return address and cost for postage. A full refund for the welder will be returned to the consumer along with the cost of postage
Cotton Sportswear Tops Recalled by Jerold Men's Shops NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE May 19, 1976 Release # 76-034 CPSC Provisionally Accepts Consent Agreement With Jerold Men's Shops, Inc., Brookline, Massachusetts WASHINGTON, D.C. (May 19) -- The U.S. Consumer Product Safety Commission announced today it has provisionally accepted a consent agreement with Jerold Men's Shops, Inc., Brookline, Massachusetts, a corporation doing business as Adam and Eve (retail shops), and Jerold Rutberg individually and as an officer of the corporation. The consenting parties are ordered to notify all customers who may have purchased cotton sportswear tops in their stores, distributed by Michael Miles/Peter Sinclair in styles MP 408, MP 409, MP 410, MP 425, and MP 426, and MP 454, that the garments do not comply with the Standard for the Flammability of Clothing Textiles (CS 191-53) and may be dangerously flammable. The recall involves adult unisex shirts which were sold during the late summer and fall of 1974. The garments, described as cotton pullovers in a variety of styles, colors and designs, retailed for $14-$16. The Adam and Eve shops which carried these tops are located in the Boston, Massachusetts area. Consumers who think they may have any of these garments should return them to the store where purchased. Under the terms of the provisional consent agreement, the consenting parties will be posting signs in each of the retail outlets which carried the sportswear tops advising consumers of the recall. In addition, the stores will enclose in the monthly billing statements to charge account customers an illustration of the garments being recalled accompanied by a warning as to the potential flammability hazard. This same information will be included in newspaper advertisements having the greatest circulation for each store location, The consenting parties have the option of either replacing the non-complying garments with those in compliance or refunding the purchase price. This agreement is for settlement purposes only and does not constitute an admission by the company that it has violated the law. Any violation of this consent agreement by the respondents could result in the assessment of substantial civil penalties. The complaint and consent order will remain on the public record for 60 days through July 18, 1976, during which time any interested person may submit comments to the Office of the Secretary, U.S. Consumer Product Safety Commission, Washington, D.C. 20207. After considering any comments, the Commission may accept the agreement or withdraw its provisional acceptance. For additional information about this consent order, contact the bureau of Compliance, U.S. Consumer Product Safety Commission, Washington, D.C. 20207.
Cotton Sportswear Tops Recalled by May Department Stores NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE May 19, 1976 Release # 76-032 CPSC Provisionally Accepts Consent Agreement With May Department Stores Company, Washington, D.C. WASHINGTON, D.C. (May 19) -- The U.S. Consumer Product Safety Commission announced today it has provisionally accepted a consent agreement with the May Department Stores Company and Arthur Emma individually and as an officer of the corporation. The consenting parties are ordered to notify all customers who may have purchased cotton sportswear tops in G. Fox and Co., a retail division of the May Company, distributed by Michael Miles/Peter Sinclair in styles MP 408, MP 409, MP 410, MP 425, MP 426, and MP 454, that the garments do not comply with the Standard for the Flammability of Clothing Textiles (CS 191-53) and may be dangerously flammable. The recall involves adult unisex shirts which were sold during the late summer and fall of 1974. The garments, described as cotton pullovers in a variety of styles, colors and designs retailed for $14 - $16. The G. Fox stores which carried these tops are all located in the Hartford, Connecticut area. Consumers who think they may have any of these garments should return them to the G. Fox store where purchased. Under the terms of the provisional consent agreement the consenting parties will be posting signs in each of the G. Fox Company stores which carried the sportswear tops advising consumers of the recall. In addition the stores will enclose in the monthly billing statements to charge account customers an illustration of the garments being recalled accompanied by a warning as to the potential flammability hazard. This same information will be included in newspaper advertisements having the greatest circulation for each store location. The consenting parties have the option of either replacing the non-complying garments with those in compliance or refunding the purchase price. This agreement is for settlement purposes only and does not constitute an admission by the company that it has violated the law. Any violation of this consent agreement by the respondents could result in the assessment of substantial civil penalties. The complaint and consent order will remain on the public record for 60 days through July 18, 1976 during which time any interested person may submit comments to the Office of the Secretary, U.S. Consumer Product Safety Commission, Washington, D.C. 20207. After considering any comments, the Commission may accept the agreement or withdraw its provisional acceptance. For additional information about this consent order, contact the Bureau of Compliance, U.S. Consumer Product Safety Commission, Washington, D.C. 20207.
Cotton Sportswear Tops Recalled by Garb-Age NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE May 19, 1976 Release # 76-033 CPSC Provisionally Accepts Consent Agreement With Garb-Age, Inc., Iowa City, Iowa WASHINGTON, D.C. (May 19) -- The U.S. Consumer Product Safety Commission announced today it has provisionally accepted a consent agreement with Garb-Age, Inc., Iowa City, Iowa, a chain of retail stores, and Timothy A. Peterson individually and as an officer of the corporation. Under the terms of the agreement the Corporation and Peterson are ordered to notify all customers who may have purchased cotton sportswear tops in their stores, distributed by Michael Miles/Peter Sinclair in styles MP 408, MP 409, MP 410, MP 425, MP 426 and MP 454, that the garments do not comply with the Standard for the Flammability of Clothing Textiles (CS 191-53) and may be dangerously flammable. The recall involves adult unisex shirts which were sold during the late summer and fall of 1974. The garments, described as cotton pullovers in a variety of styles, colors and designs, retailed for $14-$16. The Garb-Age stores which carried these tops are located in Iowa City, Iowa; Des Moines, Iowa; Davenport, Iowa; Cedar Rapids, Iowa; Overland Park, Kansas; and Lawrence, Kansas. Consumers who think they may have any of these garments should return them to the Garb-Age store where purchased. According to the provisional agreement Garb-Age will be posting signs in each of its retail stores which carried the sportswear tops advising consumers of the recall. In addition, the stores will enclose in the monthly billing statements to charge account customers an illustration of the garment being recalled accompanied by a warning as to the potential flammability hazard. This same information will be included in newspaper advertisements having the greatest circulation for each store location. Garb-Age has the option of either replacing the non-complying garments with those in compliance or refunding the purchase price. This agreement is for settlement purposes only and does not constitute an admission by the company that it has violated the law. Any violation of this consent agreement by Garb-Age, Inc., could result in the assessment of substantial civil penalties. The complaint and consent order will remain on the public record for 60 days through July 18, 1976, during which time any interested person may submit comments to the Office of the Secretary, U.S. Consumer Product Safety Commission, Washington, D.C. 20207. After considering any comments, the Commission may accept the agreement or withdraw its provisional acceptance. For additional information about this consent order, contact the Bureau of Compliance, U.S. Consumer Product Safety Commission, Washington, D.C. 20207.
Greensboro Stops Sale Children's Sleepwear NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE April 22, 1976 Release # 76-027 CPSC Accepts Provisional Consent Agreement With Greensboro, N.C., Textile Firm WASHINGTON, D.C. (April 22) -- The U. S. Consumer Product Safety Commission today announced it has accepted a provisional consent agreement that prohibits Greensboro Manufacturing Company from marketing children's sleepwear that fails to meet the standards of the Flammable Fabrics Act. Greensboro Manufacturing Company of 1900 E. Bessemer Street, Greensboro, North Carolina, is a subsidiary of GENESCO, Inc., of Nashville, Tennessee. According to the consent agreement the North Carolina manufacturer shipped to one of its customers children's sleepwear items that had flammability labels attached in inconspicuous places. Greensboro recalled the garments involved, style 1915, and the returned garments were replaced or credit given to the retailer. The sleepwear items were girls' gowns, size 0-6X, manufactured between July 29, 1972, and July 28, 1973, and retailed for about $2 each. At the time the enforcement proceeding began, a standard (DOC FF 3-71) under the Flammable Fabrics Act established a desired level of flame resistance and items that did not meet the goal required cautionary labels readily visible to warn consumers that products may be flammable. A consent agreement does not constitute an admission that the company has violated a law, but it provides for a settlement. Any violation of the consent agreement by the Company or its controlling officer could result in the assessment of substantial civil penalties. The complaint and consent order will be available for review for 60 days through June 21, 1976, during which time any interested person may submit comments to the Office of the Secretary, U.S. Consumer Product Safety Commission, Washington, D.C. 20207. After considering any comments, the Commission may accept the agreement or withdraw its provisional acceptance. For additional information about the order, contact the Bureau of Compliance, U.S. Consumer Product Safety Commission, Washington, D.C. 20207.
Galaxy Carpet Mills Stops Sale Carpets/Rugs NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE April 22, 1976 Release # 76-026 CPSC Announces Provisional Consent Agreement With Galaxy Carpet Mills, Inc., Of Illinois WASHINGTON, D.C. (Apr. 22) -- The U.S. Consumer Product Safety Commission today announced it has provisionally accepted a consent agreement prohibiting Galaxy Carpet Mills, Inc., from marketing carpets or rugs that fail to meet standards under the Flammable Fabrics Act. The agreement stated that Galaxy of Elk Grove Village, Illinois, had produced between late 1972 and early 1973 carpet and rugs with foam backing in two styles, Polara and Laredo, that had failed tests under the Standard for Surface Flammability of Carpets and Rugs (DOC FF l-70). The Laredo carpet included 12,178 square yards in '"mist green" and "autumn leaves" color and included rolls numbered 25607 and 23763; and 5,735 yards of "exotic red" dyelot 30118, including roll number 70366. The Polara carpet included colors "oriental red" dyelot 33976, involving about 3,000 square yards, including roll number 40858, and "peacock" dyelot 37687, involving 3,288 yards including roll number 45863. A consent agreement does not constitute an admission that the company had violated a law but provides for a settlement. Any violation of the agreement by the corporation could result in the assessment of substantial civil penalties. Under the consent agreement, the manufacturer is required to notify its customers that samples of the carpets and rugs involved in the order did not pass flammability tests and to recall it for correction or destruction. Under the terms of the order, the company also agrees to stop marketing goods that do not comply with the flammability standards. The complaint and consent agreement will be subject to public review for 60 days through June 21, 1976, during which time any interested person may submit comments to the Office of the Secretary, U.S. Consumer Product Safety Commission, Washington, D.C. 20207. After considering any comments, the Commission may accept the agreement or withdraw its provisional acceptance. For additional information about the order, contact the Bureau of Compliance, U.S. Consumer Product Safety Commission, 5401 Westbard Avenue, Bethesda, Maryland 20207.
Aluminum Baseball Bats Replaced by Manufacturers & Distributors NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE April 13, 1976 Release # 76-024 CPSC Announces Consent Agreement With Manufacturers And Distributors Of Aluminum Baseball Bats WASHINGTON, D.C. (April 13) -- The U.S. Consumer Product Safety Commission announced today approval of a settlement agreement between the Commission's Bureau of Compliance and respondents in the Aluminum Baseball Bats Enforcement Proceeding, CPSC Docket Nos. 75-9, 75-10, 75-11, 75-12, 75-13, and 75-14. The agreement will dispose of enforcement proceedings commenced in November, 1975 against Hillerich & Bradsby Co., Wilson Sporting Goods Co., a division of Pepsico, Inc., Lannon Manufacturing Co., Reynolds Metals Company, Alcoa Sport Products Company, a subsidiary of Alcoa, and Eaton Corporation, manufacturers and distributors of aluminum bats and rubber grip components of the bats. The enforcement proceedings were brought because the Commission staff was of the opinion that an undetermined number of aluminum bats could present a substantial product hazard within the meaning of the Consumer Product Safety Act. The staff charged that the one piece rubber grips and knob could deteriorate and separate from the handle of the bat, causing the bat to be propelled during a swinging motion and having the potential for striking a person in near proximity to the batter. The agreement is entered into for settlement purposes only, and the agreement and the order, notices and news releases agreed upon and to be issued pursuant thereto do not constitute an admission by respondents or a finding by the Commission that the Act or any other law has been violated or that respondents have failed properly to perform or carry out any duty or obligation or that the products which are the subject of the captioned proceedings contain a defect, fail to comply with any consumer product safety rule, create a risk of injury or present or constitute a "substantial product hazard" within the meaning of Section 15 of the Act. The respondents in the subject enforcement proceedings have agreed to a program notifying consumers of the possible risk alleged in the Notices of Enforcement in the proceedings and of the opportunity to receive, free of charge, an update kit with which to affix mechanically a new knob to the bat. Prior to this agreement Jas. D. Easton Inc. had agreed upon a similar program with the Commission. These bats have been sold under the following trade names: "H&B/ Louisville Slugger", "Reynolds", "AJD", "Easton", "Adirondack", "Worth", "Sears", "Sunsmacker", "Wilson", and "Rawlings". Consumers who believe that they have one of the bats should contact the manufacturer by writing Ball Bat Update Program, P.O. Box 11317, Chicago, Illinois 60611.
Rifle & Pistol Crossbows Recalled by WHAM-O NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE Originally issued April 12, 1976, Revised August 22, 2005 Release # 76-022 Note: Firm is out of business. Do not use these products. Please discard or destroy these products. CPSC And Wham-O Manufacturing Company Warn Of Possible Hazard In Crossbows WASHINGTON, D.C. (Apr. 12) -- The U.S. Consumer Product Safety Commission in cooperation with WHAM-O Manufacturing Company, San Gabriel, California, announced the recall of approximately 15,000 "Power- master" rifle crossbows and pistol crossbows which may pose an unreasonable risk of injury. The recall affects rifle crossbow Model Nos. 106 and 108, and pistol crossbows Model No. 718 which were manufactured between September 1, 1974, and March 25, 1976. These products, which consist of an aluminum bow positioned on a rifle-type or pistol-type mechanism, may contain a latch that was not heat treated. Once the bow has been cocked and the safety released this possible defect could cause the bow to fire prematurely. These products have been sold nationwide and are primarily intended for hunting. The rifle model retails for approximately $60; the pistol version for approximately $40. The firm is out of business and there is no longer any remedy available. Consumers who think they may have one of these products should discard or destroy them. WHAM-O had notified all retailers and distributors of these cross- bows by letter and requested that notices be posted in stores at point of sale advising customers of the possible defect. WHAM-O voluntarily reported the possible defect to the Commission in March 1976. Neither WHAM-O nor the Commission has learned of any injuries associated with the possible defect in these crossbows.
Continental Stops Sale Carpets NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE March 3, 1976 Release # 76-017 CPSC Accepts Provisional Consent Agreement With Continental Industries, Sale Creek, Tennessee WASHINGTON, D.C. (March 3) -- The U.S. Consumer Product Safety Commission today announced it has provisionally accepted a consent agreement prohibiting Continental Industries, Inc., doing business as Modulon Carpets, Sale Creek, Tennessee, and E. M. Hicks, individually and as an officer of the corporation from manufacturing or selling any carpets or rugs which fail to meet the requirements of the Flammable Fabrics Act. Specifically the Commission found that Continental Industries' carpet style "Galveston Bay" did not meet the Standard for the Surface Flammability of Carpets and Rugs (DOC FF l-70). According to a Commission spokesperson, 197 rolls of "Galveston Bay" were manufactured and sold to Montgomery Ward for distribution to its Chicago-area retail stores in the fall of 1972. The carpeting is a nylon pile with a foam back and comes in a variety of colors. Continental Industries, as part of the provisional agreement is to notify all customers who have purchased or to whom have been delivered "Galveston Bay" of its flammability and that it may be returned to the manufacturer to be reworked or destroyed. Persons who may have this carpeting are advised to contact the place of business from which it was purchased for recall information. This agreement is for settlement purposes only and does not constitute and admission by the company that it has violated the law. Any violation of this consent agreement by Continental Industries could result in the assessment of substantial civil penalties. The Standard for the Surface Flammability of Carpets and Rugs went into effect April 16, 1971, and applies to all types of carpets and rugs used as floor covering materials regardless of their method of fabrication or the types of fibers used. Antique, oriental or hide carpeting may be excluded from this particular testing procedure pursuant to conditions established by CPSC. The complaint and consent agreement will remain on the public record for 60 days through May 3, 1976, during which time any interested person may submit comments to the Office of the Secretary, U.S. Consumer Product Safety Commission, Washington, D.C. 20207. After considering any comments, the Commission may accept the agreement or withdraw its provisional acceptance. For additional information about this consent agreement, contact the Bureau of Compliance, U.S. Consumer Product Safety Commission, Washington, D.C.20207.
Venture Stops Sale Carpets & Rugs NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE February 12, 1976 Release # 76-013 CPSC Provisionally Accepts Consent Agreement With Venture Industries, Inc., Atlanta, Ga. WASHINGTON, D.C. ( Feb 12, 1976) - The U.S. Consumer Product Safety Commission announced today that it has provisionally accepted a consent agreement prohibiting Venture Industries, Inc., of Atlanta, Ga., from selling carpets that fail to meet the standards of the Flammable Fabrics Act. The company produced only 245 yards of a domestic style pattern and imported and marketed 1,565 rugs of two other styles, "Grafica" and "57th Street," that failed flammability standards (DOC FF 3-70). The domestically produced pattern involved in the order is identified as "Floridian," No. 6772, a nylon shag pile carpet with foam backing and produced in various colors. The "Grafica" style carpet involved patterns 320 and 324, a wool shag carpet. The 320 color is a combination of plum, coral and gray and the 324 color is red, orange and plum. The "57th Street" style, also wool shag pile carpet, involved color 310, a combination of orange, red and plum, and color 314, a combination of black, tobacco and earth colors. Of the total 1,565 imported rugs of the four colors in two styles, more than 1,000 were recovered. Consumers who may have purchased the carpet covered in the consent order may contact Venture Industries, Inc., 1401 West Paces Ferry Road, N.W., Atlanta, Ga., 30339. The carpet was tested in September 1971. At the time, the manufacturing and importing company was known as Concept Industries, Inc. A consent order does not constitute an admission that the company had violated a law but it provides for a settlement. Any violation of the consent agreement by the corporation could result in the assessment of substantial civil penalties. Under the consent order, the company agrees to stop marketing goods that do not comply with the flammability standard and to notify purchasers of substandard goods in order to recall the defective items for correction or destruction. The complaint and consent order will be subject to public review for 60 days through April 12, 1976, during which time any interested party may submit comments to the Office of the Secretary, Consumer Product Safety Commission, Washington, D.C. 20207. After considering any comments, the Commission may accept the agreement or withdraw its provisional acceptance. For additional information about the order, contact the Bureau of Compliance, Consumer Product Safety Commission, Washington, D.C. 20207.
February 9, 1976 Release # 76-011 WASHINGTON, D.C. (Feb. 9) -- The U.S. Consumer Product Safety Commission in cooperation with Creative Handweavers, Inc., of Los Angeles, California, today warned consumers that they have found skeins of yarn containing animal hair or wool that may be contaminated with anthrax spores. Approximately 15,000 pounds of this affected yarn have been distributed nationwide. The hand-spun yarn, imported from Pakistan and distributed nationwide, utilizes animal materials and retails for between $1 and $2 per skein, and has been imported by Creative Handweavers, Inc., Los Angeles, California, from Safraz Brothers, Lahore, Pakistan. The types of hand-spun yarn include: gray goat; black goat; white goat; white goat/camel; gray goat/ camel; black goat/camel; and 100% camel. The skeins bear no label. The Commission learned of the contamination by the death of a 31-year-old weaver in Morro Bay, California, in late January. Yarn obtained from Creative Handweavers was found in the weaver's home. According to Commission investigators, the contaminated yarn appeared to have been offered for sale through many retail outlets over the last year. Some may have been sold by mail order. Consumers who own this yarn should seal the yarn or products made from it in an airtight double plastic bag and call a local or state health department for disposal instructions. Consumers should not attempt to sterilize the yarn, incinerate it, or throw it away because of the risk of further contamination. Anthrax is an acute bacterial disease which can be fatal for humans if untreated. It can be transmitted from a product bearing the anthrax spores mainly through skin contact and in rare circumstances through inhalation. Anthrax infection is not contagious from one person to another. While risk of dangerous human infection is low, the disease can be quite serious. The disease may start with a blister and can develop into a depressed area of dead tissue with a dark crust. Fever and other symptoms may not appear until the disease is severe. This warning is being issued in the interest of the public health and safety and in conjunction with the Center for Disease Control, Atlanta, Georgia. The Commission is continuing its investigations to determine whether the contaminated yarn has been sold to other importers. For further information, contact the U.S. Consumer Product Safety Commission toll-free hotline at 800/638-2772
Airflow Mattress Stops manufacturing/importing Mattress NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE February 9, 1976 Release # 76-010 CPSC Provisionally Accepts Consent Agreement With Airflow Mattress, Inc., Brooklyn, New York WASHINGTON, D.C. (Feb. 9) -- The U.S. Consumer Product Safety Commission today announced that it has provisionally accepted a consent agreement prohibiting Airflow Mattress, Inc., Brooklyn, New York, a corporation, and Ralph Levine, individually and as an officer of the corporation, from manufacturing or importing products which fail to meet the requirements of the Flammable Fabrics Act. Specifically the agreement requires Airflow Mattress to conduct all flammability tests specified by the Mattress Standard (FF-4-72); to label each mattress manufactured with a permanent, accessible and legible label containing the appropriate production unit identification; and, to maintain all records required by the Standard and the Commission's regulations. Additionally as part of the provisional consent agreement, Airflow Mattress is to notify all of its customers who have purchased or to whom have been delivered mattresses manufactured by them between June 22, 1973, and December 22, 1973, that they may return these non-complying mattresses to the manufacturer for complete refund or replacement, at the option of the manufacturer, plus an allowance for reasonable costs (the means of transportation to be determined by the manufacturer). The Mattress Standard went into effect on June 22, 1973. However, a six-month "grace period" was provided during which manufacturers could attach warning labels to non-complying mattresses to indicate that they did not meet the Standard in lieu of compliance with the sampling and testing requirements. Since December 22, 1973, all newly manufactured mattresses must be produced in accordance with the sampling and testing requirements of the Standard. This agreement is for settlement purposes only and does not constitute an admission by Airflow Mattress, Inc., that it has violated the law. A future violation of this consent agreement by the company could result in the assessment of substantial civil penalties. The complaint and consent agreement will remain on the public record for 60 days through April 9, 1976, during which time any interested person may submit comments to the Office of the Secretary, U.S. Consumer Product Safety Commission, Washington, D.C. 20207. After considering any comments on the case, the Commission may finally accept the agreement or withdraw its provisional acceptance. For additional information about this consent agreement contact the Bureau of Compliance, U.S. Consumer Product Safety Commission, Washington, D.C. 20207.
Anthrax Contamination In Imported Yarn Warned by Tahki NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE February 6, 1976 Release # 76-009 CPSC Warns About Possible Anthrax Contamination In Imported Yarn WASHINGTON, D.C. (Feb. 6) -- The U.S. Consumer Product Safety Commission in cooperation with Tahki Imports, Ltd., today warned consumers that they have found balls of yarn containing animal wool or hair that may be contaminated with anthrax spores. The yarn, imported from Pakistan and distributed nationwide, utilizes animal and a combination of animal and synthetic materials and retails for between $4 and $7 per ball, and has been imported by Tahki Imports, Ltd., Teaneck, New Jersey, from Safraz Brothers, Lahore, Pakistan. The types of yarn include: 100% camel hair, white goats hair/ camel hair, gray goats hair/camel hair, black goats hair/camel hair, 2-ply wool, goats hair/wool, and rayon/wool. The contaminated balls have a label which says "Tahki Imports, Ltd., imported from Pakistan." According to Commission investigators, the contaminated yarn appeared to have been offered for sale through many retail outlets over the last year. Consumers who own this yarn should seal the yarn or products made from it in an airtight double plastic bag and call a local or state health department for disposal instructions. Consumers should not attempt to sterilize the yarn, incinerate it, or throw it away because of the risk of further contamination. Anthrax is an acute bacterial disease which can be fatal for humans if untreated. It can be transmitted from a product bearing the anthrax spores mainly through skin contact and in rare circumstances through inhalation. Anthrax infection is-not contagious from one person to another. While risk of dangerous human infection is low, the disease can be quite serious. The disease may start with a blister and can develop into a depressed area of dead tissue with a dark crust. Fever and other symptoms may not appear until the disease is severe. This warning is being issued in the interest of the public health and safety and in conjunction with the Center for Disease Control, Atlanta, Georgia. The Commission is continuing its investigations to determine whether the contaminated yarn has been sold to other importers. For further information contact the Consumer Product Safety Commission toll-free hotline at 800/638-2772.
Colony Carpets Stops Sale Carpets & Rugs NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE February 5, 1976 Release # 76-005 CPSC Provisionally Accepts Consent Agreement With Colony Carpets, Inc., Dalton, Georgia WASHINGTON, D.C. (Feb. 5) -- The U.S. Consumer Product Safety Commission today announced that it has provisionally accepted a consent agreement prohibiting Colony Carpets, Inc., Dalton, Georgia, from manufacturing or selling any carpets or rugs which fail to meet the requirements of the Standard for the Surface Flammability of Carpets and Rugs (IX FF l-70) of the Flammable Fabrics Act. The agreement cites 62 rolls of "301, Shalimar" shag carpeting with a jute back, offered in a variety of colors, which were manufactured and sold nationwide by Colony Carpets, between April 16, 1971, and April 1, 1972. The 62 rolls were re-dyed by the finishers without the knowledge of Colony Carpets, who maintain that the re-dying process affected the flame-retardant characteristics of the carpeting. Colony Carpets, as part of the provisional order, is to notify all customers who have purchased or to whom have been delivered "301, Shalimar" of its flammability and that it may be returned to the manufacturer to be reworked or destroyed. Customers who may have this carpeting are advised to contact the place of business from which it was purchased for recall information. Listed below are the identifying roll numbers of the "301, Shalimar" carpeting found to be flammable and being recalled: 10669 10670 10917 10933 10934 10943 10944 10946 10947 10950 10954 11125 11130 11131 11133 11140 11163 11164 11167 11168 11170 11185 11190 11262 11264 11266 11272 11273 11276 11282 11377 11330 11365 11369 11376 11378 11393 11395 11939 11990 12197 12198 12201 12204 12207 12222 12261 12272 12277 12280 12286 12396 12406 12476 12477 12478 12483 12484 12600 12615 12616 13383 The Standard for the Surface Flammability of Carpets and Pugs went into effect April 16, 1971, and applies to all types of carpets and rugs used as floor covering materials regardless of their method of fabrication or the types of fibers used. Antique, oriental or hide carpeting may be excluded from this particular testing procedure pursuant to conditions established by CPSC. This agreement is for settlement purposes only and does not constitute an admission by the company that it has violated the law. Any violation of this consent agreement by Colony Carpets could result in the assessment of substantial civil penalties. The complaint and consent order will remain on the public record for 60 days through April 5, 1976, during which time any interested person may submit comments to the Office of the Secretary, U.S. Consumer Product Safety Commission, Washington, D.C. 20207. After considering any comments, the Commission may accept the agreement or withdraw its provisional acceptance. For additional information about this consent order, contact the Bureau of Compliance, U.S. Consumer Product Safety Commission, Washington, D.C. 20207.
General Felt Stops Sale Carpets NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE February 5, 1976 Release # 76-007 CPSC Provisionally Accepts Consent Agreement With General Felt Industries, Inc., Saddle Brook, New Jersey WASHINGTON, D.C. (Feb. 5) -- The U.S. Consumer Product Safety Commission today announced it has provisionally accepted a consent agreement prohibiting General Felt Industries, Inc., Saddle Brook, New Jersey, from selling products that fail to meet the standards of the Flammable Fabrics Act. Through its Falcon Carpet Mills division in Dalton, Georgia, General Felt manufactured and sold to retailers and distributors throughout the country about 183,000 yards of carpet that failed flammability standards (DOC FF l-70). The carpet involved in the order was produced from April 16, 1971, to March 31, 1973, when Falcon went out of business. The carpet was marketed as "Fashion Right" style in various colors. It was an all nylon shag pile carpet with a jute back. Customers who may have purchased the "Fashion Right" style carpet should contact the place of business where it was purchased to determine if it is carpet that failed the standard. The carpet covered by the consent order included all rolls of an experimental production using Enka bulk yarn and manufactured in the summer of 1971; all rolls of a "Tigress Gold" color manufactured between April 16, 1971, and October 7, 1971; roll no. 29574-c of dye lot 5259 and two additional rolls in this dye lot in the color "Green Mist," manufactured October 4, 1971. Rolls nos. 39247-l manufactured March 10, 1972; 42657-0 manufactured March 14, 1972; 39317-2, manufactured March 15, 1972; 39452-1, manufactured March 16, 1972, and two other rolls manufactured during the shifts that these four rolls were produced. Rolls nos. 44330-0, manufactured May 30, 1972, and 49515-0, manufactured July 11, 1972, and the other rolls which, prior to those dates were manufactured after extended plant shutdown and restart procedures. And roll no. 56922-0 of dye lot 13813 and the three additional rolls of this dye lot manufactured October 18, 1971; roll no. 56761-0 of dye lot 13668 and the three additional rolls of this dye lot manufactured October 10, 1971; and roll no. 47641-1 dye lot 007056 and the one additional roll of this dye lot manufactured June 21, 1972. A consent agreement does not constitute an admission that the company has violated a law but does provide for a settlement. Any violation of this consent agreement by the corporation could result in the assessment of substantial civil penalties. Under the consent order, the company agrees to stop marketing goods that do not comply with the flammability standard and to notify known purchasers of substandard goods in order to recall the defective items for correction or destruction. The complaint and consent order will remain on the public record for 60 days through April 5, 1976, during which time any interested person may submit comments to the Office of the Secretary, U.S. Consumer Product Safety Commission, Washington, D.C. 20207. After considering any comments, the Commission may accept the agreement or withdraw its provisional acceptance. For additional information about the order, contact the Bureau of Compliance, U.S. Consumer Product Safety Commission, Washington, D.C. 20207.
Jorges Carpet Mills Stops Sale Carpets NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE February 5, 1976 Release # 76-006 CPSC Announces Provisional Consent Agreement With Jorges Carpet Mills, Inc., Rossville, Georgia WASHINGTON, D.C. (Feb. 5) -- The U.S. Consumer Product Safety Commission today announced a provisional consent agreement that prohibits a Georgia carpet firm from marketing carpet that fails to meet the standards of the Flammable Fabrics Act. The order involves Jorges Carpet Mills, Inc., Rossville, Georgia, which produced a nylon shag carpet with jute back that failed to meet a flammability standard developed in 1971 (IX FF l-70). The carpet was marketed as style 087, "Magic Affair," and produced in varying colors. Sold in 12 foot rolls or as rugs, it made up about one percent of the total production. Customers who may have purchased the "Magic Affair" style carpet should contact the place of business where it was purchased to determine if it is carpet that failed the standard. A consent agreement does not constitute an admission that the company had violated a law but it provides for a settlement. Any violation of this consent agreement by the corporation could result in the assessment of substantial civil penalties. Under the consent order, the company agrees to stop marketing goods that do not comply with the flammability standard and to notify purchasers of substandard goods in order to recall the defective items for correction or destruction. The complaint and consent order will be subject to public review for 60 days through April 5, 1976, during which time any interested party may submit comments to the Office of the Secretary, U.S. Consumer Product Safety Commission, Washington, D.C. 20207. After considering any comments, the Commission may accept the agreement or withdraw its provisional acceptance. For additional information about the order, contact the Bureau of Compliance, U.S. Consumer Product Safety Commission, 5401 Westbard Avenue, Bethesda, Maryland 20207.
India Malaysia Imports Stops Sale Garments NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE February 5, 1976 Release # 76-008 CPSC Accepts Provisional Consent Agreement With India Malaysia Imports, Inc., New York, New York WASHINGTON, D.C. (Feb. 5) -- The U.S. Consumer Product Safety Commission today announced a provisional consent agreement that prohibits a New York City shop from importing and selling products that fail to meet the standards of the Flammable Fabrics Act. The consent agreement involves India Malaysia Imports, Inc., 135 Fifth Avenue, New York, New York, and an officer, Khema L. Mahtani. The company imported from Handicraft Centre in Bombay, India, in May 1971, about 210 full length gypsy type, print skirts. About 150 skirts were sold to unidentified persons by December 26, 1972, when sales were stopped because the skirts were determined not in compliance with the flammability standard for wearing apparel (CS 191-53). Customers who may have purchased the garments should contact India Malaysia Imports, Inc., (212/777-2620) which, under the consent agreement, is required to recall the dresses to correct the deficiencies, destroy them or to return them to the supplier in a container marked to identify the goods for export only and "dangerously flammable wearing apparel -- not to be returned to the United States or its possessions." The skirts are further described as "dye and dye printed" and layered from the waist to the ankles. The skirt has a printed and flowered design in a purple and maroon color. Each layer on the dress is edged with a silver metallic strip with maroon tassels. A sewn-in label is attached at the waist, identifying the garment at "100% cotton--Handwoven in India -- India Malaysia MP; Inc. -- New York." At the waist, each skirt has a draw string with round metallic ornaments on it and at the end of the string there are pink, green and yellow tassels. A consent agreement does not constitute an admission that the company has violated a law but it provides for a settlement. Any violation of the consent agreement by the corporation or its controlling officer could result in the assessment of substantial civil penalties. The complaint and consent order will be available for review for 60 days through April 5, 1976, during which time any interested person may submit comments to the Office of the Secretary, U.S. Consumer Product Safety Commission, Washington, D.C. 20207. After considering any comments, the Commission may accept the agreement or withdraw its provisional acceptance. For additional information about the order contact the Bureau of Compliance, U.S. Consumer Product Safety Commission, Washington, D.C. 20207.
Lamps Warned by Woods Wire Products NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE December 12, 1975 Release # 75-072 CPSC And Woods Wire Products, Inc. Warn Of Severe Shock Hazard WASHINGTON, D.C. -- The U.S. Consumer Product Safety Commission and Woods Wire Products, Inc. today announced that some 40,000 clamp-on lamps with metal reflectors, manufactured during 1970 and 1971 by Woods Wire Products, Inc. may pose an imminent danger of severe electric shock. When the lamp is plugged in, the metal spring protecting the cord from strain at the base of the bulb socket cap may become electrically "hot," thus creating a shock hazard. Most of the lamps were sold in retail stores between April 1970 and December 1971 for approximately $3.00. Some may still be available. Retailers are being notified. The lamp consists of a bulb socket attached to a bowl-shaped metal reflector and to a clamp capable of gripping the edge of a door, table top, or other item of furniture. Such lamps are used for a variety of purposes requiring extra illumination. Consumers can determine whether theirs is one of the potentially defective lamps by DISCONNECTING THE LAMP from the electrical outlet and examining it as follows: The lamp will have a metal spring at the base of the socket, surrounding the power cord and extending into the base of the bulb socket cap. The wire usually has a black vinyl covering, with the trademark "INDUSTRO R" and "300 Volts" printed in white letters. These two characteristics will identify the lamp, but consumers should be aware that the metal spring is the primary identifier. After DISCONNECTING and identifying the lamp, consumers should separate the socket cap from the assembly and examine the inside of the socket. If there is a cardboard disc between the spring and the socket assembly, the lamp does not present the potential hazard. However, if there is no such insulator disc, the consumer should call the manufacturer Woods Wire Products, Inc. toll free at 800/428-9511 (In Indiana call collect at 317/844-7262) to receive instructions on how to return the potentially defective socket assembly to the manufacturer. All postage will be paid by the manufacturer.