Loading...
Loading...
All product recalls affecting Iowa.
Includes nationwide recalls (tagged “Nationwide”) and recalls with Iowa in the distribution area.
Although the etched length on the screw is correct, the length marked on the external packaging is incorrect. Specifically, 42mm screws were packaged and labeled as 46mm, while 46mm screws were packaged and labeled as 42mm.
Due to products manufactured under an inadequate quality system to include unvalidated manufacturing processes.
Potential loss of monitoring on affected monitors when powered by certain batteries. Affected batteries can lose capability to hold charge and provide back up power. If this situation occurs, it will cause loss of patient monitoring and potentially delay recognizing patient status changes requiring treatment.
Zimmer Biomet is conducting a medical device recall for two (2) lots of the Dual Mobility Vivacit-E Bearing due to a commingle. The outer package is labeled as a Size F 44 mm, however, the implant inside the package is a Size G 46 mm, and vice versa.
Due to products manufactured under an inadequate quality system to include unvalidated manufacturing processes.
Potential loss of monitoring on affected monitors when powered by certain batteries. Affected batteries can lose capability to hold charge and provide back up power. If this situation occurs, it will cause loss of patient monitoring and potentially delay recognizing patient status changes requiring treatment.
Due to products manufactured under an inadequate quality system to include unvalidated manufacturing processes.
Due to products manufactured under an inadequate quality system to include unvalidated manufacturing processes.
Due to products manufactured under an inadequate quality system to include unvalidated manufacturing processes.
Out-of-Specification (OOS) result during the 6-month stability testing; decreased preservative concentration.
This recall involves "RELIEVE" numbing cream. The cream comes in a short wide-mouthed white container. A label is located on the front with black lettering and "RELIEVE" in large type and the company's logo and "Mad Rabbit", "Numbing Cream" and "Menthol" in smaller type.
A manufacturing issue could lead to a malformed cover tube press which can lead to internal components' movement during firing - leading to the potential for uncontrolled motion.
This recall involves Persilux-branded zebra blinds. The recalled stock blinds were sold in beige, black, dark gray, light gray and white, with sizes ranging from 22 to 73 inches wide and 64 to 72 inches high. "Persilux and "Zebra Blinds" is printed on the product packaging. "X003FFPT63" is printed on the barcode label.
International Motors, LLC (International) is recalling certain 2025-2026 IC Bus CECB commercial buses. A tire may contact and damage the air dryer discharge line, causing an air leak and the unintentional activation of the parking brake.
Altec Industries, Inc. (Altec) is recalling certain 2024-2025 A Class vehicles. The platform retaining plate bolts might not have been properly tightened during assembly.
Chrysler (FCA US, LLC) is recalling certain 2022-2024 Jeep Wagoneer and Jeep Grand Wagoneer vehicles. The quarter trim on the driver and passenger windows may not have been properly secured, which can allow it to detach.
This recall involves Autoez-branded bamboo shades. The recalled bamboo shades were sold in brown, with sizes ranging from 24 to 72 inches wide and 64 to 72 inches high. "Autoez" is printed on the sticker label on the top rail of the shade.
The IFU (Information for Use) on the wrap instructs the user to heat the hot and cold compression wrap in the microwave for 3 minutes, which may cause the wrap to leak or break at the seams and/or reach temperatures capable of causing a second degree burn.
Cognito Motorsports (Cognito) is recalling certain Rev C Ball Joints with part number 91253, for installation on 2011-2025 GMC and Chevrolet 2500HD and 3500HD trucks. The ball stud may pull through the housing, causing the upper control arm to disengage.
BMW of North America, LLC (BMW) is recalling certain 2026 M4 and 430i vehicles. The positive battery cables may not be properly connected to the power distribution box, resulting in an engine stall and a fire.