Loading...
Loading...
All product recalls affecting Louisiana.
Includes nationwide recalls (tagged “Nationwide”) and recalls with Louisiana in the distribution area.
This recall involves LINKCOO corded window shades. The roller shades were sold in white, gray and black, and in sizes ranging between 10 and 75 inches wide and 79 inches high. "LINKCOO" is printed on the label sticker on the shades' lower pole.
Due to a potential open seal in the sterile barrier packaging.
Due to a potential open seal in the sterile barrier packaging.
Due to a potential open seal in the sterile barrier packaging.
Corp. Micro Bird, Inc. (Micro Bird) is recalling certain 2012, 2015-2019, and 2024 G5 school buses equipped with Type 2 seat belts. The seat reinforcement supports may not have been installed. As such, these vehicles fail to comply with Federal Motor Vehicle Safety Standard numbers 207, "Seating Systems" and 210, "Seat Belt Assembly Anchorages."
An issue has been identified in the production of the RTS873 robotic total stations that may result in the green aiming laser output power being above its laser safety Class 2 classification.
CGMP Deviations; detection of Nitrosamine Drug Substance-Related Impurities (NDSRI), N-nitroso-desmethyl-diphenhydramine (n-dph), above the FDA Recommended Intake Limit
CGMP Deviations: presence of Nitrosamine Drug Substance Related Impurity (NDSRI), N-nitroso-duloxetine, above the recommended interim limit.
Mack Trucks, Inc. (Mack) is recalling certain 2022-2025 Mack LRBE trucks. The high voltage batteries may have loose hardware that can fall inside the battery pack and create a short circuit.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2026 Freightliner eM2, Freightliner 108SD, Freightliner 114SD, Freightliner Cascadia, 2025-2026 Freightliner Business Class M2, Western Star 47X, and Western Star 49X vehicles. A software error in the advanced signal and actuator module for the automatic emergency braking system may cause the brake lights to fail to illuminate.
Lucid USA, Inc. (Lucid) is recalling certain All-Weather Floor Mats without anchors, model numbers ending in -00. Please see the recall report for a complete list of all affected part numbers. The floor mats may move and trap the accelerator pedal, causing unintended acceleration.
Volvo Trucks North America (Volvo Trucks) is recalling certain 2023-2025 VNR Electric trucks. The high voltage battery may contain loose hardware, which can create a short circuit inside the battery cells.
The hip cup liner that was packaged with the incorrect labeling. HDL-060-C22S-000101 from Lot 1788258 contained a hooded liner, but it was labeled to have a standard liner.
Keystone RV Company (Keystone) is recalling certain 2025 Kodiak 2900FKSP and 308BHSL travel trailers. The patio travel latch screws may become loose, causing the patio latch to detach during transit.
Boston Scientific has identified that IceSeedTM CX needles manufactured between April 2024 and February 2025 have been programmed with DEMO settings instead of Commercial settings (see Affected Product Listing). Upon initial connection of an IceSeed CX needle to the Cryoablation System, the user will be prompted to perform the Needle Integrity and Functionality Test (NIT) per standard protocols. The affected needles perform as intended unless they are disconnected and reconnected to any channel after testing. In this case, the Cryoablation System will prompt re-execution of the NIT.
The Quadrature Body Coil (QBC) seal adhesive may fail, creating sharp edges that may come in contact with patients. If the QBC seal becomes loose during the scanning process, the risk to the patient may include skin abrasions, bruises, lacerations, hair loss/entanglement, and tissue injury.
The Quadrature Body Coil (QBC) seal adhesive may fail, creating sharp edges that may come in contact with patients. If the QBC seal becomes loose during the scanning process, the risk to the patient may include skin abrasions, bruises, lacerations, hair loss/entanglement, and tissue injury.
The Quadrature Body Coil (QBC) seal adhesive may fail, creating sharp edges that may come in contact with patients. If the QBC seal becomes loose during the scanning process, the risk to the patient may include skin abrasions, bruises, lacerations, hair loss/entanglement, and tissue injury.
The Quadrature Body Coil (QBC) seal adhesive may fail, creating sharp edges that may come in contact with patients. If the QBC seal becomes loose during the scanning process, the risk to the patient may include skin abrasions, bruises, lacerations, hair loss/entanglement, and tissue injury.
Boston Scientific has identified that IceSeedTM CX needles manufactured between April 2024 and February 2025 have been programmed with DEMO settings instead of Commercial settings (see Affected Product Listing). Upon initial connection of an IceSeed CX needle to the Cryoablation System, the user will be prompted to perform the Needle Integrity and Functionality Test (NIT) per standard protocols. The affected needles perform as intended unless they are disconnected and reconnected to any channel after testing. In this case, the Cryoablation System will prompt re-execution of the NIT.