Loading...
Loading...
All product recalls affecting South Dakota.
Includes nationwide recalls (tagged “Nationwide”) and recalls with South Dakota in the distribution area.
February 5, 1979 Release # 79-007 Toy Cork Gun Recalled WASHINGTON, D.C. (Feb. 5) -- Eagle Family Discount Stores, Inc., Opa Locka, Fla., in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today warned consumers that about 5,844 double-barreled toy cork shotguns sold in their stores during the 1976 and 1977 Christmas seasons may present a hazard of eye injury to a young child. Consumers who have bought one of these toys should not let their children play with it, and should return it to their nearest Eagle Family Discount Store for a full refund. CPSC believes that serious eye injury could occur if a child abuses the toy by removing the muzzle end of the gun barrel, exposing the ends of two metal rods covered with plastic plunger caps. These caps can be removed by a force of three or four pounds, leaving the ends of the metal rods completely exposed. If the toy gun is cocked and discharged, the exposed ends of the metal rods could then be propelled forward into a child's face or eyes. The double-barreled toy cork shotgun retailed for about $1.27 in Eagle Family Discount Stores located in Florida and in a few stores in Alabama and Georgia, according to Eagle. The words, "Gun Fighter," appear in silver on each side of the toy gun. The stock is colored brown, the gun barrels are black and the cocking lever is chrome-colored plastic. The toy gun was made in Hong Kong or Taiwan, according to Eagle, and was identified as product no. 97-S-510,, which appears on the toy gun's package. To date, CPSC is aware of one incident of eye injury occurring when a three and one-half year-old boy apparently shot the toy gun into his eyes and was struck by the unprotected metal rod. Although the injury occurred to a three and one-half year old, the product's package contains, according to Eagle, a cautionary statement that the toy shotgun is not recommended for children under five years of age. To verify the product number, consumers can call the toll-free CPSC Hotline on 800/638-2772
Fly Control Devices Recalled by Pestolite NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 Note: Firm is out of business. Do not use these products. Please discard or destroy these products. FOR IMMEDIATE RELEASE Originally issued January 18,1979; Revised June 5, 2003 Release # 79-003 Fly Control Devices Recalled WASHINGTON, D.C. (January 18) -- Pestolite, Inc., Lancaster, Pa., in cooperation with the U.S. Consumer Product, Safety Commission (CPSC), announced a voluntary recall of 1,005 Commercial Fly Control Devices, model SK-4, because of a possible fire hazard. The products are used to keep flying insects under control in or around residences, restaurants, stores, hotels, plants and recreational areas. They were produced from March 1976 through August 1976, and sold nationwide. If too many dead insects accumulate and block the centrifugal fan, the unit may overheat and create a fire hazard. The device has been linked to 25 fires since 1976. To identify the product, look for the "Pestolite" name molded in raised silver letters on the black upper housing of the unit. Devices not specifically exhibiting the raised "Pestolite" name on the upper housing are not being recalled, nor are units manufactured, reworked, inspected or repaired by Pestolite, Inc., after December 1977, which have affixed a red imprinted white label stating, "CAUTION: Continued operation with clogged fan will render unit inoperative." The firm is out of business and cannot be contacted. Do not use these products. Please discard or destroy these products. Consumers who need to verify the model number should call CPSC's Toll-Free Hotline at 800-638-2772.
Battlestar Galactica space toys Replaced by Mattel NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE January 11, 1979 Release # 79-001 Mattel Announces Toy Replacement Program HAWTHORNE, CALIF. (January 11) -- Mattel, Inc., in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced that it has voluntarily initiated a "Missile Mail-In" campaign to reduce the possibility of accidents which might occur in connection with four of its "Battlestar Galactica" space toys. Each of the four toys is sold with a set of small red plastic missiles which can be launched from each toy. Although all of the products meet or exceed all existing and ration proposed safety standards, there have been instances of accidental swallowing or aspiration of a missile including one reported death of a four-year-old child. The "Missile Mail-In" plan offers parents and children the opportunity to mail all of their remaining small 1-1/4 inch red plastic missiles to Mattel and receive in return a free "Hot Wheels" car. Missiles should be mailed to: Mattel Mail-In P.O. Box 813 Hawthorne, California 90250, along with the consumer's name and address. To encourage immediate response, this program will expire on March 1, 1979. The missiles accompany Mattel's "Colonial Viper" (No. 2531), "Colonial Scarab" (No. 2534), "Colonial Stellar Probe" (No. 2533), and "Cylon Raider" (No. 2532) space vehicles. Mattel and the Consumer Product Safety Commission stated that the Mail-In program was initiated to remove the possibility of an accident and to inform parents of the need to caution children regarding small objects of any type which might be put in the mouth. At the same time, the offer of a free "Hot Wheels" miniature car is intended to compensate for any loss of play value due to return of the missiles. In addition to the mail program, Mattel announced that it has redesigned the four "Battlestar Galactica" toys for 1979 so that, missiles cannot be launched from the body of the toys. Retail and wholesale inventories of the 1978 product are currently being exchanged for the redesigned toys. For further information, consumers may call Mattel toll-free on 800/421-2826; California residents call collect to 213/644-2752. Letters may be addressed to Mattel, Inc., at 5150 Rosecrans Avenue, Hawthorne, California 90250. To verify model numbers, consumers can call the toll-free CPSC Hotline on 800/638-2772.
Toy Telephone Sets Recalled by Montgomery Ward NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE November 9, 1979 Release # 79-064 Montgomery Ward Recalls 20,000 Toy Telephone Sets WASHINGTON, D.C. (Nov. 9) -- Montgomery Ward is recalling approximately 20,000 toy telephone sets offered for sale through its mail-order catalog, the U.S. Consumer Product Safety Commission today announced. The phone sets were imported from Yugoslavia and are very similar to the toy telephones recalled last month by another U.S. firm. The sets include two battery-operated toy telephones connected by means of a detachable cord. The two-prong plugs at each end of the cord so closely resemble genuine electrical plugs that children may try to force them into household sockets, thereby receiving severe shocks or burns. While Montgomery Ward has received no consumer complaints of injuries from the cords, CPSC staff reports that an 8-year-old girl was burned earlier this year when she forced a plug from a similar phone set (which was distributed by another company) into a wall electrical outlet. The sets are ivory in color, and are equipped with functional intercoms, signal lights and buzzers. The name "Mehanotehnika" is printed on the bottom of each phone. The sets have been sold through Ward's catalogs since 1975. They are advertised in the current Christmas catalog as a "Desk Phone Set," number 48T20192, at a retail price of $9.96. Consumers ordering the toy phones are being informed that such orders are not being filled until the company can equip the phone sets with cords and plugs which are safe. Consumers should return the toy to any Montgomery Ward catalog store for a full refund.
December 12, 1978 Release # 78-104 Armour Replaces Safety Caps On Thyroid Tablets WASHINGTON, D.C. (Dec. 12) -- Armour Pharmaceutical Company and the U.S. Consumer Product Safety Commission (CPSC) today announced that Armour will replace the child-resistant caps on approximately 140,000 100-tablet bottles of prescription thyroid tablets. Efficacy and safety of the tablets themselves are not in question and no recall is involved. The firm voluntarily initiated the cap replacement program, which involves only those packages held in its warehouses, after Commission testing indicated that some adults might be unable to properly reclose the safety feature of the present package during use in the home. Regulations under the Poison Prevention Packaging Act currently require that at least 90% of those adults tested be able, not only to open the packages, but also to properly close them to protect young children from accidentally swallowing the contents. In addition to replacing caps on current inventory, Armour plans to continue its on-going safety packaging program to meet its own standards of quality and to assure compliance with CPSC regulations. In presenting this matter to the Commission, the staff acknowledged that upon receipt of the results of Commission testing, Armour promptly stopped distribution of the product in question and took immediate action to investigate and correct the problem
Riviton Sets Recalled by Parker Brothers NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE December 11, 1978 Release # 78-103 Riviton Sets Voluntarily Held WASHINGTON, D.C. (Dec. II) -- More than 125,000 toy construction sets manufactured by Parker Brothers are being voluntarily held in inventory in two company warehouses in Salem, Massachusetts and Des Moines, Iowa, after the company announced its voluntary recall of 900,000 Riviton sets. A Parker Brothers spokesman told the Consumer Product Safety Commission (CPSC) that 27,000 of the Riviton construction sets have now been returned. Parker Brothers had made the decision to voluntarily withdraw this product from the market because of two accidental deaths associated with the product. The company reached this decision after the recent death of a 9-year-old child was attributed to the choking on a rubber fastening rivet from the Riviton Construction Toy. Riviton Construction Toys have been distributed nationally during the past two years. Parker Brothers, a subsidiary of General Mills, Inc., is asking all consumers to return the product for a full refund to the store from which it was purchased or to mail it direct to Parker Brothers, 190 Bridge Street, Salem, MA 01970. All retailers have been asked to remove the product from their shelves. Any consumer seeking further information may contact Parker Brothers, Consumer Response, Riviton Recall, 50 Dunham Road, Beverly, MA 01915. Consumers can call Parker Brothers collect at 617/927-4900.
December 8, 1978 Release # 78-102 Mattel Puts Safety Labels On Toys WASHINGTON, D.C. (Dec. 8) -- Mattel, Inc., Hawthorne, California, in cooperation with the U.S. Consumer Product Safety Commission (CPSC) today announced that it has initiated a voluntary program of attaching labels on warehouse inventories of certain of its Battlestar Galactica line of space toys. The label states: "Caution: Do Not Point Or Fire Red Missiles Into Mouth Or Toward Face." The small red missiles are sold with Mattel's "Colonial Viper" (No. 25311, "Colonial Scarab" (No. 25341, "Colonial Stellar Probe" (No. 2533), and "Cylon Raider" (No. 2532) space vehicles and each is equipped to launch the missiles. Mattel emphasizes that the products meet or exceed all existing and proposed product safety standards. The action is being taken in response to reports of three accidents involving the products. In each case, a child swallowed or aspirated a red missile, received medical treatment and was released. Mattel and the Consumer Product Safety Commission remind parents that small pieces are found in many manufacturers' toys and games intended for older children. Parents should caution children against putting small objects of any type in their mouths even in fun and should insure that small pieces from older children's toys are kept away from younger brothers and sisters. For further information, consumers may call Mattel toll-free on 800/421-2826; California residents call collect to 213/644-2752. Letters may be addressed to Mattel, Inc. at 5150 Rosecrans Avenue, Hawthorne, California 90250
November 24, 1978 Release # 78-096 Warning Issued On Portable Air Tanks WASHINGTON, D.C. (Nov. 24 ) -- Citation Mfg. Co., Inc., Siloam Springs, Ark., in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today issued a warning that some portable air tanks manufactured by the company, may rupture or explode because of defects in the metal tank casing. The company has received numerous reports about ruptured tanks causing injuries since 1973, including one death in Tennessee. The tanks are used for such purposes as pressurizing tires. A recall of these same products was conducted by the company individually on several occasions and with the help of CPSC in 1973, but the firm suspects 118,000 tanks may yet be in the hands of consumers. The tanks were made between 1969 and 1975. They may be painted red, blue or yellow. Red tanks may be labeled, "Citation Power Cleaning Equipment"; Yellow tanks, "Camel Big Airy No. 5510"; and blue tanks, "General Service Line No. 9-774 Portable Air Tank". Each tank is cylindrical in shape, 21 inches long and 14 inches high and weighs 23 pounds. Anyone wanting more information about these tanks should contact Mr. Delbert Phillips at Citation (501/524-6471). To verify model numbers and brand names, call CPSC's toll-free Hotline at 800/638- 2772
November 22, 1978 Release # 78-095 Thermostat "Activator" Units Recalled WASHINGTON, D.C. (Nov. 22) -- Fuel Sentry Corp., Mt. Vernon, N.Y., in cooperation with the U.S. Consumer Product Safety Commission (CPSC) today announced a voluntary recall of the "Activator" part of some 20,000 Automatic Day/Night Thermostat Controls, model FS-5, because of a possible fire hazard. The thermostat control is packaged in a kit including the "Activator" unit and an electric timer. The controls were sold nationwide and retailed for $20-$25. The control allows residential heating systems to be automatically set at lower operating temperatures. The "Activator" unit may contain a defective carbon resistor which could cause a fire if it fails. Since July 1977, there have been 12 reported failures with minor fires occurring in ten instances. There have been no injuries reported. Subject to recall are "Activators" made between September 1976 and August 1977 and between November 1977 and May 1978, and bearing codes 396 through 526, 017 through 327, 437 through 527 and 018 through 218. The date codes are on the back of the "Activator" units. Note that these codes indicate week and year of manufacture (396 for example, means 39th week of 1976). Further verification may be made by visual inspection through the key hole slot in the back of the unit. The potentially defective resistors are brown. Any other color is not subject to this recall. Consumers who have an affected unit should stop use and return the "Activator" portion only, for repair, including refund of postage costs, to: Fuel Sentry Corp., 435 E. Third Street, Mt. Vernon, N.Y. 10553 (914/699-6192). Date codes and the model number can be verified by calling CPSC's toll-free hotline at 800/638-2772
November 22, 1978 Release # 78-094 Amana Freezers WASHINGTON, D.C. (Nov. 22)-- The U.S. Consumer Product Safety Commission (CPSC) and Amana Refrigeration, Inc., Amana, Iowa, today announced that 96,000 owners of Amana side-by-side refrigerator-freezers made between February 1969 and September 1974, have been contacted by the company and given instructions for modifying the units to eliminate any possibility of shock hazard. In its first announcement of the possible defect made jointly with Amana in August 1977, CPSC described the voluntary repair program for about 240,000 units. According to Amana, it has exhausted all available lists of consumers to contact concerning the modification program and wants the remaining owners to get in touch with the company immediately. The Amana models to be modified are SR17, SR19, SR22, SR25, SD19, SD22, and SD25, whose serial numbers begin with the letters IS, E, B, L, A or C. The appliances in question can be positively identified by checking the model and serial number on the serial plate located behind the removable black grille at the lower front of the unit. The possibility of a shock hazard is caused by a defective hinge wire assembly which powers the butter-keeper heater and anti-sweat heater. CPSC has learned of 41 shock incidents to date. Anyone owning one of the 144,000 units that have not yet been modified should immediately furnish model, serial number, name and address to Amana Refrigeration, Inc., Amana, Iowa 52204. If consumers are unable to contact Amana directly they should call, with the same information, CPSC's toll-free hotline at 800/638-2772
Chain Guard Kit for Bicycle Offerred by Columbia NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE November 15, 1978 Release # 78-091 Columbia Bicycle Offers Chain Guard Kit WASHINGTON, D.C. (Nov. 15) -- The Columbia Manufacturing Company, Westfield, Mass., in cooperation with the Consumer Product Safety Commission (CPSC), is providing consumers with a chain guard kit. This kit will be furnished free to consumers who have purchased Columbia bicycles which do not meet Federal bicycle requirements. The bicycles in question, which were manufactured between November 13,1976 and August 13,1978 and distributed nationwide, consist of the following: 3-speed, 24-inch racers called "Miami," girls' Models Nos. 1433 and 1439, and boys' Model No. 1434; and "Gold Crest" 3-speed 26-inch racers, men's Model No. 3648. The round disc-type guard affixed to the front sprocket on these Columbia models, while acceptable on derailleur-type bicycles, does not provide coverage of the top of the chain or of any part of the chain to the rear of the front sprocket. To date, no consumer complaints or injuries have been reported. Federal bicycle regulations, effective 11/13/76, require a full coverage chain guard on all bikes having a single front and single rear sprocket, and set specifications for the extent of chain coverage for such bicycles which are intended to prevent entrapment of clothing or body parts. Consumers are advised to contact the place of purchase of their bikes to receive the chain guard kit. The kit consists of a new chain guard which is to be fitted over the existing disc-type guard and a complete set of instructions. According to Columbia, installation of the new chain guard can be easily accomplished by the owner using a screwdriver. Inquiries should be addressed to Customer Service Department, Columbia Manufacturing Company, Westfield, Mass. 01083.
Smoke Detectors Recalled by BRK Electronics NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE November 6, 1978 Release # 78-089 Pittway-BRK Press Release WASHINGTON, D.C. (Nov. 6) - The Consumer Product Safety Commission (CPSC) today announced an agreement with the Pittway Corp., Northbrook, Ill., doing business as BRK Electronics, whereby Pittway has agreed to pay $100,000 in settlement of a civil penalty action which the Commission had decided to file. The agreement was negotiated between Pittway and CPSC staff and accepted by the Commission on Nov. 1. The Commission's action against Pittway concerned the company's alleged failure to report a defect in the BRK SS749 series smoke detectors which could cause such products to fail to operate and, in certain instances, to catch fire. The defect consisted of incorrectly rated resistors used in the SS749 smoke detectors produced by the BRK Electronics division of Pittway from March 1974 to September 26,1975. The Consumer Product Safety Act requires a manufacturer to notify the Commission immediately after learning of a defect which could create a substantial product hazard. In agreeing to a settlement of this matter, the Pittway Corporation has neither admitted nor denied violating the notification requirements of the Act. The company has cooperated in voluntarily carrying out an extensive program to recall the approximately 115,000 smoke detectors involved. Thus far, approximately 60,000 smoke detectors have been returned. The company has agreed to continue, and to intensify, its efforts to locate the remaining smoke detectors. The units subject to this recall are 110 volt AC-powered detectors which sold for a suggested retail price of $39.95. No battery-powered detectors are involved. Some models were manufactured with ordinary power cords (line cord) which plug into wall outlets, others have pigtail leads (hard wire) for installation directly into electric wiring. The detectors were marketed by BRK, American Machine & Foundry (AMF), I-T-E Imperial Corporation (I-T-E) and Sears, Roebuck & Company (Sears). They have the following model numbers: BRK SS749AC (hard wire) SS749ACS (hard wire) SS749L (line cord) SS749SL (line cord) AMF 2000AC (hard wire) 2000ACL (line cord) I-T-E ITOl-AC (hard wire) Sears 9-57049 (hard wire) 9-57047 (line cord) 9-57048 (line cord) Homeowners who suspect they have one of these smoke detectors are urged to check the model number on their unit. (Caution: Before inspecting-hard-wired detectors, electrical power to the unit must be turned off at the fuse box or circuit breaker; line cord detectors must be unplugged before inspection). Once the power is off o remove the cover and examine the side of the plastic base for a label which contains the model number. Anyone who has one of the Sears units affected by this recall should contact the nearest Sears store, which will arrange for inspection and free replacement of the unit containing the defect. People who believe they have any of the other detectors under recall should contact BRK to obtain a fact sheet, which gives very specific criteria for identifying potentially defective units, as well as replacement instructions. Additional information concerning the recall can be obtained by contacting BRK Electronics, 780 McClure Avenue, Aurora, Illinois 60507, Attention: Dennis Wm. Clair, Project 749 Director; or by calling toll-free 800/323-9005 and asking for the Project 749 Department.
October 26, 1978 Release # 78-088 Fuel Cylinders Recalled WASHINGTON, D.C. (Oct. 26) -- Cleanweld Products, Los Angeles, in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced a voluntary recall of all its yellow CleanBurn Fuel Cylinders, model CB-1000, manufactured from June 1977 to April 1978. A separation at the point where the threaded connector meets the cylinder may cause a fuel leak, resulting in possible ignition and burns to the user. Fuel leakage could also de-pressurize the cylinder quickly enough to propel it. The cylinders are used to fuel portable torches. They were sold as part of the "Whirlwind Torch Kit" (PR-3600) or separately. They cost about $4.75, and were distributed nationwide. Only the yellow cylinders are being recalled. Consumers should stop use and return the product to the place of purchase for a full refund. Anyone who wants additional information should contact Cleanweld Products, 4000 Medf ord Ave., Los Angeles, Calif. 90063 (toll-free 800/421-6253). Model numbers can be verified by contacting CPSC's toll-free hotline at 800/638-2772
October 19, 1978 Release # 78-086 WASHINGTON, D.C. (Oct. 19) -- Carrier Corporation, Syracuse, N.Y., in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced it is voluntarily recalling two models of room air conditioners produced between 1962 and 1964. The company said engineering tests on several of the 14 to 16-year-old units had revealed the deterioration of a terminal board insulator which could cause an electrical short that might ignite adjacent combustible material. Three fires last May involving these unit models in an apartment complex in Anaheim, Calif., were reported by the company to CPSC. There were no reported injuries related to those fires. The product involved is a 6,000 BTU air conditioner sold under the Carrier "Weathermaker" brand name and identified by the mode1 number 51GA0661 or 51GB0661. The model number will be found on a metallic plate behind the unit's decorative front grille, which can be snapped out easily. The units generally would be used to cool a single small room, such as a bedroom, and, in most instances, would be installed in a window. The units are about 16 1/2 inches high, 22 inches wide, 11 1/4 inches deep and weigh 100 pounds. They were sold throughout the continental U.S. during the years 1962-65 at a retail price of $185 to $210. Carrier said the company had produced a total of 21,591 such units, that they are now well beyond their normally expected product life, and that age, moisture and heat contributed to the deterioration of the electrical terminal board. The company estimates that as many as 2,782 units or as few as 628, might still be in service. Consumers having units as identified for the recall are urged to disconnect the air conditioner from the electrical outlet and to cease using it immediately. They should telephone their nearest Carrier room air conditioning dealer, as listed in the Yellow Pages Directory. Units will be repaired at no cost to the consumers. Consumers who require additional information should write to Carrier Air Conditioning, Carrier Parkway, Syracuse, N.Y. 13221 or phone the company's Consumer Relations Department at 315/432-7651. To verify brand names and model numbers, consumers may contact CPSC's toll-free Hotline at 800/638-2772
October 18, 1978 Release # 78-085 Portable Water Heaters Recalled WASHINGTON, D.C. (Oct. 18) -- Rhinehart Manufacturing Co., Spencerville, Ind., in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today warned consumers about a possible serious shock hazard stemming from its "Miti-Mite" portable, immersible electric water heater. About 15,000 to 25,000 heaters have been sold since production began 15 years ago. The heaters are primarily used to heat small quantities of water in rural areas without hot water facilities. The heater is to be plugged into a standard electrical outlet. It consists of an exposed, resistive heating element contained inside a disc-shaped, perforated, aluminum case. This perforated case allows water to flow inside and directly into contact with the heating element, presenting a dangerous shock hazard if the appliance is "on" and immersed in water. To date, CPSC knows of no injuries involving the Rhinehart heaters. The heater does not bear a model number, but can be identified by the label "Miti-Mite" embossed on top. The heaters are sold in outlets such as hardware stores. They presently sell for about $4-$5 and distribution may be nationwide. An unknown number are currently in consumers' hands. Consumers are warned they may be electrocuted if they touch the water container or the water itself while the heater is "on" and immersed in water. Consumers should immediately stop using these heaters and return them for a refund to: Rhinehart Manufacturing Co., Spencerville, Ind. 47688 (telephone: 219/238-4442). Rhinehart no longer manufactures or repairs the "Miti-Mite" heaters
September 28, 1978 Release # 78-079 J.C. Penney Conducts Repair Program For Bench Grinders WASHINGTON, D.C. (Sept. 28) -- The J.C. Penney Company, Inc., in cooperation with the U.S. Consumer Product Safety Commission (CPSC) and McGraw-Edison Co., has announced a voluntary repair program of about 2,700 J.C. Penney six-inch bench grinders that may pose an electric shock hazard. The model 4030 grinders were sold by J.C. Penney between June 1973 and approximately June 1975. A protective sleeve that insulates a lead wire may wear through if in contact with the motor shaft. Severe shock could result if the bench grinder is not properly grounded, and the user is grounded or touching a grounded metal object such as a water pipe. The repair program applies only to model 4030 grinders purchased after June 1973 which are not imprinted with a three-digit date code (such as 57C) on the nameplate. The bench grinder should not be used until it has been inspected and reworked. Owners of the bench grinders should contact their local J.C. Penney store to make free inspection and repair arrangements. A repair program that included the J.C. Penney grinders was first announced by the McGraw-Edison Co. and CPSC on August 29,1978. To verify the model number, call CPSC's toll-free Hotline at 800/638-2772
September 27, 1978 Release # 78-078 Consumers Urged To Inspect Edger/Trimmer Garden Tools WASHINGTON, D.C. (Sept. 27) --Weed Eater, Inc., Houston, Texas, in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced an inspection and replacement program for the "406 Grass Getter", a nylon string edger/trimmer sold exclusively by Montgomery Ward and Co. The electrical insulation on some of the garden tools may have been damaged during shipping and could expose a user to an electric shock. No injuries have been reported. The units involved were sold by Wards between December 20,1977 and August 10, 1978. They were offered for sale through Wards' retail and catalog stores and sold for about $59.00. The only units affected can be identified by the model number WWH 2052A. This is the only model number affected. The model number appears both on the warning label on the metal shaft and on a name plate on top of the motor housing. The logo "406 Grass Getter" also appears on the name plate. To inspect the unit, the consumer is urged to unplug the unit, separate the upper and lower halves of the metal tubular shaft so as to expose the wiring, and check the visible wiring for cuts in the insulation of the wires. (About four inches of wiring is exposed when the unit is taken apart.
September 25, 1978 Release # 78-077 Portable Electric Fans Recalled WASHINGTON, D.C. (Sept. 25) -- The Vernco Division of the Emerson Electric Co., Columbus, Ind., in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced a potential fire hazard in some of its 13- and 19-inch, portable electric fans. Vernco said that under certain conditions these fans may overheat and possibly catch fire. Some 72,000 fans manufactured in 1973 and 1974 and sold nationwide are being recalled. The affected fans have a plastic fan guard and circular plastic base. Approximately 75 percent were sold through Sears, Roebuck and Co., and are inscribed with the initials "SR" in the center of the plastic fan guard. The Sears units are light green. The 13-inch model sold for approximately $30, and the 19-inch for about $50. The Vernco fans bear the "Vernco" inscription on the plastic fan guard. They are light blue and were sold through other retailers at similar prices. The only fans involved are those having the 5-digit date code ending with the numbers 3 or 4 and bearing Sears model no. 758.80530 or 758.80550, or Vernco no. V-1001 or V-1003. Both the date code and model number are stamped on the bottom of the base. Consumers are cautioned against using these fans and are urged to return them to the place of purchase to arrange for free repair. For further information about the Vernco models, contact Mr. Norman Edwards of Vernco at 812/372-9901. For Sears fans, call the nearest Sears retail store
September 20, 1978 Release # 78-075 J.C. Penney Alerts Consumers To Potential Bike Defect WASHINGTON, D.C. (Sept. 20) -- The J.C. Penney Co., Inc., New York City, in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today warned bike riders that about 33,500 bicycles marketed under the "J.C. Penney" brand name may have a defective pedal crank that could break, possibly resulting in serious injury to the rider. The bicycles with the possibly faulty cranks are deraillure-type, 24-, 26-, and 27-inch, lo-speed, lightweight vehicles. They are painted light tan or dark grey and were manufactured in 1977 and 1978. J.C. Penney marketed the bicycles in their retail and catalog stores in all 50 states and Puerto Rico. One bike sold under the Penney's name was associated with a laceration injury that occurred when the pedal crank broke. Consumers can tell if they have one of the bicycles by looking for the numbers 2131A2, 2141A2, 2180Al or 2181Al on the outside of the left, rear, metal axle plate where the wheel is attached. Also appearing with each number is a J.C. Penney catalog number. The light tan bikes are imprinted with catalog numbers 927-3525, 927-3533, 927-7070, 927-7088, 927-7096, 927-7104 or 927-7112. The dark grey bicycles bear catalog number 927-7120. Penney's and CPSC strongly urge consumers who own one of the possibly defective bikes to contact a J.C. Penney store or catalog center for free inspection and, if necessary, replacement of the pedal crank. A recall that included the J.C. Penney bicycles was first announced by the Huffy Corp. and CPSC on May 31, 1978. To verify model and catalog numbers, call CPSC's toll-free Hotline at 800/638-2772
Bench Grinders Repaired by McGraw-Edison NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE August 29, 1978 Release # 78-074 Bench Grinders To Be Repaired WASHINGTON, D.C. (Aug. 29)-- The Portable Appliance and Tool Group, McGraw-Edison Co., Columbia, Mo., in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced a voluntary repair program for about 16,000 six-inch bench grinders, which may pose a shock hazard. A protective sleeve insulating a lead wire may wear through on some of the units, bringing the wire into direct contact with the motor shaft and possibly resulting in severe shock if the tool is not properly grounded and if the user is grounded or touching a grounded metal object such as a water pipe. Two cases have been reported where the insulation has worn through, one of which resulted in a shock. The tools were manufactured from April through July 1973, and for limited periods between February 1977 and January 1978. The repair program applies to the following models of six-inch bench grinders purchased after June 1973 and not showing any three-digit date code embossed on the nameplate (e.g., 57C): Manning Bowman model 715100, Toastmaster model 5577, Power House model 711100, J. C. Penney model 4030, Western Auto-Wizzard model POE 6203A, Ward's Power Kraft model TGB-5102A, and K-Mart model 30-09Tl. Also involved are K-Mart model 30-90Tl showing the date code 77B, 77D, 77E or 77F, and Ward's Power Kraft model TGB 5102A with the 77F date code embossed on the nameplate. Tools having these date codes and containing an orange inspection sticker on the carton or the unit have already been inspected and are not involved in the repair program. Anyone owning one of these bench grinders should temporarily stop use and write to: Bench Grinder Repair Program, c/o National Service Manager, Portable Appliance and Tool Group, McGraw-Edison Co., 2nd and Vine St., Boonville, Mo. 65233, to get instructions for having the unit checked and repaired free-of-charge. To verify brand names and model numbers, consumers may contact CPSC's toll-free Hotline at 800/638-2772.