Loading...
Loading...
All product recalls affecting Tennessee.
Includes nationwide recalls (tagged “Nationwide”) and recalls with Tennessee in the distribution area.
Expansion of recall of size 14 mm Codman Disposable Perforators for inadequate welds to size 11 mm and 9 mm Codman Disposable Perforators out of an abundance of caution.
Although the etched length on the screw is correct, the length marked on the external packaging is incorrect. Specifically, 42mm screws were packaged and labeled as 46mm, while 46mm screws were packaged and labeled as 42mm.
Due to products manufactured under an inadequate quality system to include unvalidated manufacturing processes.
Potential loss of monitoring on affected monitors when powered by certain batteries. Affected batteries can lose capability to hold charge and provide back up power. If this situation occurs, it will cause loss of patient monitoring and potentially delay recognizing patient status changes requiring treatment.
Zimmer Biomet is conducting a medical device recall for two (2) lots of the Dual Mobility Vivacit-E Bearing due to a commingle. The outer package is labeled as a Size F 44 mm, however, the implant inside the package is a Size G 46 mm, and vice versa.
Due to products manufactured under an inadequate quality system to include unvalidated manufacturing processes.
Potential loss of monitoring on affected monitors when powered by certain batteries. Affected batteries can lose capability to hold charge and provide back up power. If this situation occurs, it will cause loss of patient monitoring and potentially delay recognizing patient status changes requiring treatment.
Due to products manufactured under an inadequate quality system to include unvalidated manufacturing processes.
Due to products manufactured under an inadequate quality system to include unvalidated manufacturing processes.
Due to products manufactured under an inadequate quality system to include unvalidated manufacturing processes.
Out-of-Specification (OOS) result during the 6-month stability testing; decreased preservative concentration.
Issue 1: The potential for unintentional continued gantry/couch movement when a specific button series is used requiring use of manual stop. Issue 2. When performing a helical/Axial scan with ORI (Dose Right index)/ DOM (Dose Modulation), the WED (Water Equivalent Diameter) value might set itself to zero, and this may lead to an insufficient dose setting after the surview. If operator misses the insufficient dose and the WED value in User Interface and continues with the subsequent helical/Axial scans, then the obtained images will be noisy due to low dose setting. Issue 3: Due to a software failure, the ECG wave file is not saved. As a result, the cardiac offline image reconstruction fails due to the missing ECG wave file, and the user might rescan the patient. Issue 4: This issue is software fault in which the patient orientation will be changed to NULL under specific random scenarios resulting in radiation being delivered from the wrong orientation (surview scan) or in the wrong position (clinical scan) and will generate incorrect and undiagnosable surview/clinical images. Patients may be rescanned for surview and/or clinical images. Issue 5: During scanning, the preview image display is not consistent, the images are not arriving at a fixed rate, skipping images from time to time during scanning. The obtained images might not support making the clinical diagnosis and the user might decide to re-scan the patient. Issue 6: If a user presses the left and middle/right mouse buttons together or afterwards in a short time, both commands are executed and an incorrect auto ROI is created. This ROI coordinates won t be assigned as the object is empty. As a result, the threshold of contrast level will not be reached in the UI and this will prevent the system from automatically triggering the subsequent clinical scan. There is potential safety risk identified for additionally tracker shots and/or rescan of a patient when the clinical scan is not triggered. This issue only affects the manual ROI process.
This recall involves "RELIEVE" numbing cream. The cream comes in a short wide-mouthed white container. A label is located on the front with black lettering and "RELIEVE" in large type and the company's logo and "Mad Rabbit", "Numbing Cream" and "Menthol" in smaller type.
Issue 1: The potential for unintentional continued gantry/couch movement when a specific button series is used requiring use of manual stop. Issue 2. When performing a helical/Axial scan with ORI (Dose Right index)/ DOM (Dose Modulation), the WED (Water Equivalent Diameter) value might set itself to zero, and this may lead to an insufficient dose setting after the surview. If operator misses the insufficient dose and the WED value in User Interface and continues with the subsequent helical/Axial scans, then the obtained images will be noisy due to low dose setting. Issue 3: Due to a software failure, the ECG wave file is not saved. As a result, the cardiac offline image reconstruction fails due to the missing ECG wave file, and the user might rescan the patient. Issue 4: This issue is software fault in which the patient orientation will be changed to NULL under specific random scenarios resulting in radiation being delivered from the wrong orientation (surview scan) or in the wrong position (clinical scan) and will generate incorrect and undiagnosable surview/clinical images. Patients may be rescanned for surview and/or clinical images. Issue 5: During scanning, the preview image display is not consistent, the images are not arriving at a fixed rate, skipping images from time to time during scanning. The obtained images might not support making the clinical diagnosis and the user might decide to re-scan the patient. Issue 6: If a user presses the left and middle/right mouse buttons together or afterwards in a short time, both commands are executed and an incorrect auto ROI is created. This ROI coordinates won t be assigned as the object is empty. As a result, the threshold of contrast level will not be reached in the UI and this will prevent the system from automatically triggering the subsequent clinical scan. There is potential safety risk identified for additionally tracker shots and/or rescan of a patient when the clinical scan is not triggered. This issue only affects the manual ROI process.
A manufacturing issue could lead to a malformed cover tube press which can lead to internal components' movement during firing - leading to the potential for uncontrolled motion.
This recall involves Persilux-branded zebra blinds. The recalled stock blinds were sold in beige, black, dark gray, light gray and white, with sizes ranging from 22 to 73 inches wide and 64 to 72 inches high. "Persilux and "Zebra Blinds" is printed on the product packaging. "X003FFPT63" is printed on the barcode label.
International Motors, LLC (International) is recalling certain 2025-2026 IC Bus CECB commercial buses. A tire may contact and damage the air dryer discharge line, causing an air leak and the unintentional activation of the parking brake.
Altec Industries, Inc. (Altec) is recalling certain 2024-2025 A Class vehicles. The platform retaining plate bolts might not have been properly tightened during assembly.
Chrysler (FCA US, LLC) is recalling certain 2022-2024 Jeep Wagoneer and Jeep Grand Wagoneer vehicles. The quarter trim on the driver and passenger windows may not have been properly secured, which can allow it to detach.
This recall involves Autoez-branded bamboo shades. The recalled bamboo shades were sold in brown, with sizes ranging from 24 to 72 inches wide and 64 to 72 inches high. "Autoez" is printed on the sticker label on the top rail of the shade.