Loading...
Loading...
All product recalls affecting Vermont.
Includes nationwide recalls (tagged “Nationwide”) and recalls with Vermont in the distribution area.
Squeeze Toys Recalled by Reliance NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE May 24, 1982 Release # 82-022 Reliance "Protecto Hold Me Tite" Squeeze Toy Recalled Because Of A Choking Hazard WASHINGTON, D.C. -- In cooperation with the Consumer Product Safety Commission, Reliance Products Corporation, Woonsocket, Rhode Island, today announced a voluntary recall of approximately 390,000 "Protecto Hold Me Tite" squeeze toys, Assortment #06233, because of the danger of choking and/or suffocation. Since 1974 approximately 390,000 of the toys have been sold for approximately $1.97 each. There have been two separate reports alleging that a four month old and a six month old infant choked and suffocated when the handle of the "Hold Me Tite" squeeze toy lodged in the throat and caused obstruction of the airways. The product is an animal shaped squeeze toy with a handle and a built in squeaker. Three models are involved: a pink elephant, a yellow bear and an orange lion. The product is packaged and sold under the brand name "PROTECTO" and labeled "Hold Me Tite" assortment number 06233. Stamped on the squeaker section on the back of the head is "Reliance Products Corporation, Made in Taiwan." Consumers should remove these products from use immediately and return them to the retailer where purchased for a full refund. Or consumers may return the squeeze toy to Reliance Products Corporation, 108 Mason Street, P.O. Box 1220, Woonsocket, Rhode Island for a full refund. Retailers should remove the toys from sale immediately and return to Reliance Products Corporation for a full refund.
Attic Ventilators Recalled by Emerson NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE May 17, 1982 Release # 82-020 Emerson Electric Company Recalling Powered Attic Ventilators In cooperation with the U.S. Consumer Product Safety Commission, Emerson Electric Company, St. Louis, Missouri, today announced a voluntary recall of 11,500 roof-mounted powered attic ventilators sold by Sears, Roebuck and Co. The motors of the ventilators may overheat and cause roof-top fires. The attic ventilators were sold nationwide through Sears retail stores and catalog sales in 1980 and 1981, for approximately $70.00. The ventilators have a light-gray molded polyvinyl outer hood. The identification plate on the back of the motor bears the Model No. 758.648360. The manufacturer has received several reports from consumers, since September 1981, alleging that these ventilators were involved in roof-top fires. No consumers have been injured in these fires. Consumers should examine the back of their attic ventilator and check the model number. Owners of the affected ventilators should discontinue using them and contact Emerson Electric Company on their toll-free number: l-800-325-4130. Missouri residents may call collect at 314-595-2507. The Companies will arrange for a service technician to visit the consumer's home and replace the motor of the ventilator free of charge.
Vac Attachments Recalled by Sun Hill NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE April 22, 1982 Release # 82-019 1000 Sun Vac Attachments Recalled WASHINGTON, D.C. -- Sun Hill Industries, Inc. of Stamford, Connecticut, in cooperation with the U.S. Consumer Product Safety Commission, announced today that it is recalling its Sun Vac, a wet vac/dry cleaning vacuum attachment, because of a potential electric shock hazard. This product converts a regular dry vacuum cleaner to a vacuum cleaner which can pick up water or other liquids from floors and other surfaces. The product consists of a 3 l/2-gallon plastic bucket and two adapter hoses, one of which can be connected to a dry vacuum cleaner. Sun Hill Industries and the CPSC are concerned that an electric shock hazard could result if the product's bucket becomes full of water or accidentally tips over. Water could then be sucked into the vacuum cleaner, soaking the motor. This could result in a potentially severe or fatal electric shock if anyone touched a metallic part of the vacuum cleaner while standing on a wet floor. No accidents have been reported by purchasers or users of the attachment since it was first introduced in March of 1980. However, Sun Hill Industries is recalling the product in the interest of consumer safety. Sales were discontinued in February 1981, after almost 1,000 units had been distributed. Consumers who have purchased the Sun Vac are requested to return the product directly to Sun Hill Industries, Inc., Glenbrook Industrial Park, 652 Glenbrook Road, Stamford, CT 06906. Refunds for the original purchase price, and for transporting Sun Vac back to the company, will be forwarded directly to the purchaser. Consumers who have questions on return of the product or who wish further clarification should call collect Sun Hill Industries, Inc. at 203-324-7550.
Metal Utility Clamp Lamps Recalled by Mid-State NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE April 2, 1982 Release # 82-011 Metal Utility Clamp Lamps Recalled Because Of Shock Hazard WASHINGTON, D.C. -- A voluntary recall of approximately 8,000 metal socket utility clamp lamps was announced today by the Mid-State Manufacturing Corp. of Minneapolis, Minnesota , in cooperation with the U.S. Consumer Product Safety Commission. The recall is being conducted because of a potential shock or electrocution hazard from an electrical short to the metal reflector, lamp base, and handle. One consumer has received a serious electric shock using the product. The recall covers Mid-State models P60, R208, R68, R205, R65, LX6 and LG9, sold nationwide since March 1981 in retail and hardware stores including Coast- to-Coast, Gamble Skogmo, and some Hardware Hank stores. Only models with metal sockets are being recalled. The Mid-State identification appears on a cardboard tag on the product cord. Consumers should immediately stop using the product and return to the place of purchase or directly to the manufacturer for a free replacement. Mid-State Mfg. Corp., 1111 Aldrich Ave., North, Minneapolis, Minnesota 55441. Anyone wishing to verify model numbers or retail locations where the lamps were sold may contact CPSC's toll-free Hotline at 800-638-2772.
Release # 82-008 WASHINGTON, D.C. -- Creative Playthings had renewed its efforts to replace all estimated 137,000 to 239,000 Creative Playthings Indoor Gym House ladders following a recent strangulation death. The product was manufactured prior to 1980 by Creative Playthings, a unit of Gabriel Industries, a division of CBS Inc., New York, N.Y. Consumers are urged to remove and destroy the ladder immediately. The replacement program was conducted in cooperation with the U.S. Consumer Product Safety Commission which advised the firm of the death of a two-year-old California boy on February 9, 1982, in an accident associated with a Creative Playthings Indoor Gym House. The firm first took corrective action for the product in February, 1980, after learning of an accidental death and an incident causing brain damage which later resulted in death to a child playing with the product. The firm then urged owners of the product to obtain a free replacement ladder because the original ladder posed a strangulation hazard. The Creative Playthings Indoor Gym House consists of a hollow, fiberboard-and-wood box 20 inches in height which supports a two-step wooden ladder on one side and a short slide on the opposite side. The top of the box or "platform" serves as a bridge between the ladder and the slide and is protected on two sides by wooden railings. The product is intended for use by children ages 18 months through 3 l/2 years, according to the manufacturer. It was sold for approximately $29 to $50 in toy stores and other retail outlets nationwide in knocked-down form to be assembled by the owner. The ladder that was being replaced was manufactured from 1962 through 1979. The gym houses with ladders that were being replaced are those with "Creative Playthings" printed on the side or with no lettering. The space between the upper rung of the ladder and the platform was small enough for a child's head to be inserted and become entrapped creating a potential for strangulation. The replacement ladder that had been offered by the firm was redesigned to reduce the likelihood of head entrapment. The Creative Playthings company that conducted the recall no longer exists. The replacement ladders are no longer available, and consumers should discard or destroy the ladder if they have the product. Creative Playthings had undertaken additional efforts to advise owners to destroy the old ladder. The firm sent letters and posters to pediatricians and daycare centers throughout the United States, advertised in magazines, provided a public service announcement to major networks, aimed a news campaign to consumer affairs editors, and sent advisory bulletins to organizations serving parents of young children. Creative Playthings "Indoor Gym House
Lawn Mowers Recalled by Black & Decker NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 Note: Telephone Number Change. FOR IMMEDIATE RELEASE Originally issued March 9, 1982; Revised May 27, 2003 Release # 82-007 Recall Of Black And Decker Lawn Mowers WASHINGTON, D.C. -- The Black & Decker Manufacturing Company, in cooperation with the U.S. Consumer Product Safety Commission, today announced the recall and repurchase of approximately 18,000 of its Model No. 8055 19" Battery Powered (Cordless) Lawn Mowers because of a possible fire hazard. The lawn mowers were sold nationwide between 1976 and the present and are orange and white in color. The company said it wants to recover every mower of that model and is offering refunds to owners. Black & Decker has received reports of a possible fire hazard associated with the battery used to power the Model No. 8055 Lawn Mower. These reports indicate that under certain circumstances, it is possible for a fire to occur as a result of an unexpected discharge of the lawn mower battery. The discharge occurs when the lawn mower battery is not in use and is either being recharged or is unattended. Black & Decker will grant a prorated refund to all owners of the Model 8055 Battery 'Powered Lawn Mower and is attempting to locate all owners to inform them of the possible fire hazard and the repurchase program. Black & Decker will mail certified letters to all persons who have informed the company that they own one of the mowers to provide them instructions on how to return the mower and obtain a refund. This recall and refund program applies to every Model No. 8055 Lawn Mower, including those which may have been modified by Black & Decker during the past year. All owners of the model No. 8055 Battery Powered Lawn Mower who have not received a certified letter from Black & Decker should contact the company immediately by calling (410) 665-7400, 8:00 a.m. to 5:00 p.m. Eastern Time, or call the Commission's toll free Hotline at (800) 638-2772.
Stuffed Teddy Bear Toys Recalled by Far East International NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE February 27, 1981 Release # 81-009 Stuffed Teddy Bear Toy Animals Recalled To Eliminate Safety Hazards WASHINGTON, D.C. (February 27) -- An estimated 23,000 children's stuffed teddy bears distributed nationwide by a New York importer are being recalled by the importer in cooperation with the U.S. Consumer Product Safety Commission because the toys may present safety hazards which could injure young children. Testing of the toy animals by CPSC showed that a substantial percentage of the noses and eyes of the teddy bears could be pulled off easily, thus posing a potential choking hazard. The tests, simulating normal use and abuse of the toys by a young child, were performed on a random sample of the teddy bears; they have been determined to be "banned hazardous substances" under the Federal Hazardous Substances Act. The teddy bears were manufactured in Korea and distributed nationwide to toy stores by Far East International, Inc., of New York City. Product code tags on the potentially hazardous toys are numbered 202-50, 202-94, 202-95 or 202-219. Another label sewn to the leg of each teddy bear reads "Sunkyung Limited. Made in Korea." Consumers are being urged to mail their children's teddy bears directly to Far East International at 1182 Broadway, Room 901, New York, New York, 10001. The company will provide full refunds or another toy animal of comparable value and will reimburse consumers for mailing costs. The importer also will alert each of its retail customers to the safety hazards and to the procedures to be followed in carrying out the recall. The company has stopped making further shipments of these teddy bears.
Gas Control Valves Recalled By Honeywell NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE January 15, 1982 Release # 82-001 Explosion Hazard Results In Recall Of Honeywell Heating Gas Control Valves-- Investigation Continuing WASHINGTON, D.C. (Jan. 15) -- The U.S. Consumer Product Safety Commission announced the recall of more than 200,000 gas control valves used in heating appliances fueled by LP ( Liquid Propane) gas because they may create an explosion hazard. CPSC staff are continuing to investigate the use of 2.5 million of the same gas control valve in heating appliances fueled by natural gas to determine whether a similar explosion hazard is presented. These gas control valves were last manufactured in 1972. CPSC has been informed of 28 explosion incidents involving LP fueled appliances which have occurred since February 1972, in which Honeywell valves, which are a component in an overall furnace system were present. These incidents resulted in 5 deaths and 21 injuries. The valves being recalled were manufactured from 1966 through 1972 and distributed to a variety of manufacturers for use on their LP fueled heating appliances which were principally central furnaces, but also boilers, unit heaters, conversion burners and space heaters. The recall is being conducted voluntarily by the manufacturer of the valves, Honeywell, Inc., Minneapolis, Minnesota. The combination valves serve the dual purpose of regulating the gas supplied to the appliance and of shutting off the gas supply when the pilot light is extinguished. In a number of these incidents, it is alleged that the valve may have failed allowing LP gas to leak. Because LP gas, unlike natural gas, is heavier than air, it may accumulate near the floor. If the gas is exposed to an ignition source such as electric sparks or matches, an explosion may occur causing property damage and personal injury. The recall pertains to combination gas control valves which bear one of the following model numbers and were used in LP fueled heating appliances: C5133 C5134 CS5133 CS5134 V4136 V4146 V5118 v5189 V7284 V8129 V8136 V8139 V8146 VS8133 VS8138 VS8141 Consumers should exercise caution when attempting to locate the valve and its model number which is located on the side of the gas valve. To locate the valve, consumers may have to remove the access panel on the front of their heating appliance. If any odor of leaking gas is present, consumers should not attempt to locate the valve, but should instead, immediately contact their gas supplier for assistance. When looking for the valve and model number, consumers should be careful not to use matches or any other ignition source which could cause any accumulated gas to explode. Honeywell voluntarily initiated the gas valve recall in March 1980, and have contacted LP gas suppliers nationwide, who in turn have contacted LP gas users. Consumers who own one of these valves should contact immediately their LP gas supplier or the nearest Honeywell Residential Office to arrange to have a new control valve installed free-of-charge. Anyone who has difficulty locating the control valve or its model number should contact their local LP gas supplier or Honeywell by writing to Honeywell, Inc., (14N 38-4286), 10400 Yellow Circle Drive, Minnetonka, Minnesota 55343. The Commission is seeking complaint and incident data concerning gas control valves and encourages consumers to report this information to the U.S. Consumer Product Safety Commission's toll-free hot line at 800-638-2772.
Plastic Table Lamps Warning NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE December 3, 1981 Release # 81-029 Consumers Warned That Four Million Plastic Lamps May Pose Electrocution Hazard WASHINGTON, D.C. ( Dec. 3 ) -- Three firms today alerted consumers that approximately four million plastic table lamps if misused or carelessly handled may pose a risk of eIectrocution or electrical shock. The warning was issued voluntarily in cooperation with the U.S. Consumer Product Safety Commission by A-Bee Syndicate, Inc., of New York, New York; B & D Molded Products, Inc., of Shelton, Connecticut; and Injection Corporation, of Plainfield, New Jersey. CPSC staff has identified these companies as manufacturers and distributors of the lamps according to definitions in the Consumer Product Safety Act. According to the firms, the lamps were designed and manufactured in conformity with existing industry practices. They could, however, pose a potential safety hazard if the lightbulb socket is dislodged or removed from the lamp base, thereby exposing two electrical terminals positioned on either side of the socket. The lamps consist of a black plastic base with three legs which supports a plastic shade covered with bubble-like protrusions. The shades were produced in three colors: white, lime-green and neon-orange. The lamps stand approximately 16 inches tall, and some were made with the name "A-Bee" on the smooth collar at the base of the shade. The lamps were sold nationwide for approximately $1 each in variety retail stores from 1965 through 1975, although the majority were distributed in the eastern half of the U.S. Some lamps may have been given away as promotional items. Consumers who own one of the lamps should take the following steps to determine if there is a safety hazard: Unplug the lamp; Remove the shade and turn the lamp upside down; Throw the lamp away if the bulb socket falls out of the base or is loose enough to expose the electrical terminals. Anyone requiring additional information about this warning should contact CPSC's toll-free Hotline at 800-638-2772. Warning Certain of the pictured table lamps may contain a potential electrocution or shock hazard. Each lamp consists of a black, plastic three-legged base supporting a plastic shade covered with bubble-like protrusions. The shades are available in white, neon-orange, and lime-green. The lamps were distributed from 1965 through April 1975 and sold for approximately $1.00. The lamps may often be identified through the name "A-BEE" which may be visible on the smooth collar on the base of the lamp's shade. If the lamp is titled or tipped, the bulb socket may dislodge from the lamp's base, thereby exposing two copper electrical terminals. Consumers should check to see if their lamp is one affected by talking the following steps: Unplug the Lamp Remove the shade from the lamp's base Turn the lamp upside down If a bulb socket works itself loose or falls out exposing the electrical terminals, the lamp should not be used. In certain of the affected table lamps, the bulb socket may not be securely fastened to the lamp's base or may have been able to work itself loose from the lamp's base. Consumers owning one of the affected lamps are warned to immediately stop use of the lamp and remove it form children's access.
Baby Crib Brackets Recalled by Questor NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE November 17, 1981 Release # 81-028 Baby Crib Brackets Recalled WASHINGTON, D.C. (Nov. 17) -- A voluntary recall of the brackets used on approximately 98,000 baby cribs for suspending the springs was announced today by the Questor Juvenile Furniture Company of Los Angeles, California, in cooperation with the U.S. Consumer Product Safety Commission. The recall is being conducted to replace the plastic brackets on about 98,000 full-sized "Baby Line" cribs manufactured by Questor. In several cases the plastic brackets have broken or bent, causing the mattress and springs to drop slightly. Three infants reportedly have received minor injuries. The plastic "crib-spring hanger brackets" are mounted on each of the crib's four corner posts to suspend the springs by means of hooks. The recall covers those brackets used on 29 models of Baby Line cribs date-coded from June, 1977 through September, 1978 . Included in the 98,000 cribs are approximately 34,000 cribs which are continuing to be recalled by Questor as a result of a program which has been underway since 1979 for the same problem. Only cribs bearing the following date codes are involved: 677, 777, 877, 977, 1077, 1177, 1277, 178, 278, 378, 478, 578, 678, 778, 878 and 978. The date code is on a label on the inside bottom of the crib headboard. (A complete list of cribs with the plastic brackets are attached to this release.) Owners of these cribs should write to the manufacturer to obtain a free replacement kit containing metal hanger brackets and installation instructions. Letters should be addressed to Baby Line Furniture Co., 6235 South Street, Andrews Place, Los Angeles, California 90047, Attention: Corrective Program. Anyone wishing to verify model numbers and assembly dates may contact CPSC's toll-free Hotline at 800-638-2772.
Cribs Recalled by Questor NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE October 19, 1981 Release # 81-027 Approximately 17,000 Portable Cribs Recalled WASHINGTON, D.C. (Oct. 19) -- Approximately 17,000 portable cribs are being recalled by the Questor Juvenile Furniture Company, of Piqua, Ohio, because the bottom of the cribs may separate from the sides, allowing an infant to fall to the floor. The recall is being conducted voluntarily in cooperation with the U.S. Consumer Product Safety Commission. CPSC staff has been informed of 36 incidents since 1979, in which infants fell to the floor when the soft vinyl crib "basket" became unstitched from the net sides. Four infants were reported injured. The recall pertains only to model 320 "Kantwet Trav-L-Cribs" that do not contain a date code on the reverse side of the large white "law tag" attached to the crib mattress, The cribs are constructed of a colored vinyl "basket" with net sides hung on a collapsible metal frame. The model number, 320, is located on the front of the law tag. If the tag has a date code on its reverse side, the crib is not being recalled. The cribs were manufactured between January and June, 1979, and sold for approximately $35 in retail stores east of the Rocky Mountains. The cribs were not marketed west of the Rockies. Consumers who own a non-date-coded model 320 "Kantwet Trav-L- Crib" can obtain a free replacement unit by mailing a six-inch- by-six-inch swatch of materiai cut from the vinyl basket plus the white law tag from the mattress to: "Trav-L-Crib," 1801 Commerce Drive, Piqua, Ohio, 45356. Cribs With Plastic Brackets Model Number Description Finish Approximate Retail Price 30705-08 Jennylind Maple $130 30706-50 Jennylind White $130 30707-10 Jennylind Pine $130 6071-08 Jennylind Maple $140 6071-50 Jennylind White $140 6574-03 Calico Kids Walnut $100 6574-58 Calico Kids Yellow $100 7430-03 Shaggy Dog Walnut $100 7430-50 Shaggy Dog White $100 6068-03 Springtime Walnut $100 6068-58 Springtime Yellow $100 6074-10 Cannonball II Windsor Burnished Pine $140 6074-50 Cannonball II Windsor White $140 6072-08 Colonial Maple $140 6072-10 Colonial Burnished Pine $140 6072-50 Colonial White $140 7475-10 Colony Burnished Pine $100 7475-50 Colony White $100 7475-58 Colony Yellow $100 7112-03 Barnyard Pals Walnut $75 7112-50 Barnyard Pals White $75 7419-03 Carousel Walnut $80 7419-58 Carousel Yellow $80 7400-03 Contempo Walnut $80 7400-08 Contempo Maple $80 7400-50 Contempo White $80 8078-03 Snoopy Walnut $100 8078-50 Snoopy White $100 30445-50 Winnie-the-Pooh (sold on West Coast only) $100
Seat Attachment Parts On Exercise Bikes Replaced by Beacon NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE October 13, 1981 Release # 81-026 Seat Attachment Parts To Be Replaced On 120,000 Exercise Bikes WASHINGTON, D.C. (Oct. 19) -- Beacon Enterprises, Inc., of Yonkers, N.Y., is conducting a program to replace the seat-attachment hardware on more than 120,000 stationary exercise bikes because of reports that some customers failed to follow the assembly instructions properly and were seriously injured when the metal seat post unexpectedly broke through the seat. The manufacturer, in cooperation with the U.S. Consumer Product Safety Commission, announced that the voluntary recall involves units of its Scandia model 462 dual-action cycler built between August 1976 and July 1980. The bikes were sold under the Beacon name through catalogs of major merchandisers including Montgomery Ward and Alden's, and at a number of retail stores nationwide, Some units also were sold through catalogs of Sears, Roebuck and Co, under the Sears name as model 2930. Retail prices ranged from about $20 to $30. No exercise bikes other than Beacon's Scandia model 462 or the Sears model 2930 are involved in the recall. Beacon and the CPSC warn that if customers ignore the products assembly instructions and neglect to secure the seat with a bolt and nut supplied in the parts bag accompanying each bike, the unit's plastic seat may be punctured by the seat post. The CPSC said that no reports of injury were received when the bikes were properly assembled. According to the CPSC, six injuries were reported between 1979 and 1981. No injuries were reported from bikes sold by Alden's or Sears. As part of its voluntary program, the manufacturer is providing a free replacement kit consisting of a bolt, lock washer, nut, warning decal, and instructions for attaching the seat. The kit also tells customers how to look for signs of possible seat failure, The CPSC said that design changes for the seat mount which the company made starting in August 1980 limit the recall to units manufactured before that date. Exercise bikes built after August 1980 bear orange-red decals on the seat tops. The agency said that owners of units without the seat bolt and nut in place should stop using them and contact the manufacturer. Owners of units with the bolt and nut in place should make sure that the nut is secured tightly. Beacon has established a 24-hour telephone service to provide full information about the product and to take orders for the free replacement kits. Consumers are urged to call 212-683-9288 collect for further details about the recall.
Terry Cloth Bathrobes Recalled by Sears NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE October 13, 1981 Release # 81-025 Sears Recalls Terry Cloth Bathrobes WASHINGTON, D.C. (Oct. 13) -- Approximately 160,000 men's terry cloth bathrobes are being recalled by Sears, Roebuck and Co. of Chicago, Illinois, because the fabric may burn rapidly if ignited after repeated washing and drying. The 100 per cent cotton robes were sold through Sears stores from Fall 1977 through Spring 1980. The recall, first announced in November 1980, is being repeated voluntarily by Sears in cooperation with the U.S. Consumer Product Safety Commission. Although the robes meet CPSC flammability standards for clothing, Sears has received several reports that the robes ignited. Two styles of men's cotton terry cloth bathrobes are involved one a shawl-collar wrap-around robe, the other a kimono-style with three-quarter length sleeves. They sold for approximately $13 to $16. Consumers can identify the garments by looking for a label at the neckline that states: "Sail-Made in China-10090 cotton - for Sears, Roebuck and Co." No other Sears robes are affected by this recall. To receive a full refund, consumers should return the robes to the customer convenience center service desk of any Sears store. Anyone wishing additional information should contact the customer service department of any Sears store, or call the CPSC toll-free Hotline at 800-638-2772.
Chain Saws Recalled by McCulloch NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE October 5, 1981 Release # 81-024 Approximately 8,000 Chain Saws Recalled WASHINGTON, D.C. (Oct. 5) -- The McCulloch Corporation, of Los Angeles, California, is voluntarily recalling approximately 8,000 "Electramac" electric chain saws imported to the U.S. from Canada since April, 1981. The firm is conducting the recall in cooperation with the U.S. Consumer Product Safety Commission. The recall applies to "Electramac" EM 10, EM 12A and EM 14A chain saws, which include an electric cord connected to the back of the unit. The saws have been sold nationwide for approximately $70 to $110. No other McCulloch products with electric or gasoline engines are involved. The firm initiated the recall after it learned of four incidents of spontaneous restarting among units manufactured by Black and Decker of Canada, Inc. McCulloch and Black and Decker of Canada are subsidiaries of the The Black and Decker Manufacturing Company, of Towson, Maryland. The saw's "on/off" switch may fail to function properly, causing the chain saw to continue to run after release of the trigger or to start spontaneously when put down after use, No injuries have been reported, although these conditions pose a potential safety hazard, In the one occurrence reported in the U.S., the electric chain saw restarted after being switched off and put down. Black and Decker of Canada has produced an improved '"on/off" switch that will eliminate the restarting problem, according to McCulloch. Consumers should immediately stop using their "Electramac" chain saws and bring them to a Black and Decker Service Center for repair. New "on/off" switches will be incorporated into their saws free-of-charge. Units with new switches, which will now be on sale, will be designated "Type 2" on the label on the saw. To learn the location of the nearest Black and Decker Service Center, consumers should look in the Yellow Pages section of the telephone directory under the heading, "Tools." McCulloch, which informed CPSC of the potential hazard on September 8, has mailed certified letters providing recall instructions to all consumers who returned the registration card packed with the chain saws. Consumers who require additional information about this recall or are too far from a Black and Decker Service Center to return their saws should call McCulloch toll-free at 800-423-6302; in California, 213- 822-9724.
Smoke Detectors Recalled by Chloride Pyrotector NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE August 3, 1981 Release # 81-020 Smoke Detectors Recalled WASHINGTON, D.C. (August 3, 1981) -- Some Commercial and residential battery-operated photoelectric smoke detectors sold since 1979 under the brand names of Chloride Pyrotector, Archer, Masterguard, Vanguard, Vantage I and Protect-er Systems are being recalled because a potentially defective electronic microchip may prevent the alarm from sounding in the presence of smoke. The recall is being conducted voluntarily by the Chloride Pyrotector Division of Chloride, Inc., Hingham, Mass., in cooperation with the U.S. Consumer Product Safety Commission. Some of the firm's 185,000 smoke detectors manufactured from March 1, 1979 to March 15, 1981 may contain a transistor array semiconductor that will not operate in the presence of smoke. Owners of the smoke detectors have been asked by the manufacturer to remove the back plate of the product so that the model or code number may be checked on the interior hosing. Potentially defective smoke detectors include the following: Chloride Pyrotector - Models 3077,3078,3079; Archer number 275453 sold through Radio Shack; Masterguard MGB 360; Vanguard 817; and Protect-er Systems P365. Potentially defective models also will have a 6-digit data code on the housing showing dates between 030179 and 031581. Consumer wishing to verify the model number should contact CPSC's toll-free Hotline at 800-638-2772. Commerical and residential users may verify the integrity of the smoke detectors by testing the horn with a fresh factory specified 9-volt battery. If the horn sounds when the test button is pressed, the detector does not contain a defective microchip; if the horn does not sound, the user is requested to call Roberta Calla of Chloride Pyrotector at 1-800-343-5647 for instructions on where to send the product for a free replacement or repair.
Mobile Home Furnaces Repaired by HOME NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE June 9, 1981 Release # 81-017 Carbon Monoxide Gas Hazard Prompts Repair Program For Mobile Home Furnaces WASHINGTON, D.C. (June 9) -- A program to repair as many as 55,000 liquid propane and natural gas furnaces used in mobile homes is being conducted by the manufacturer because the furnaces may pose a risk of death or poisoning by leaking carbon monoxide gas if portions of the vent system corrode. The repair program pertains to all model MMG "Miller"-brand gas furnaces manufactured by the HOME Division of Lear Siegler, Inc., of Holland, Michigan. The firm, in voluntary cooperation with the U.S. Consumer Product Safety Commission, has agreed to replace the flue-pipe extension within the furnaces. Corrosion in the flue-pipe extension and vent system may permit carbon monoxide gas to be emitted into the living areas. CPSC has been informed of 19 deaths since 1969 which have been associated with carbon monoxide leakage from the MMG model furnaces. Approximately 46,000 furnaces were manufactured from 1964 through 1971, and an additional 9,000 furnaces were converted to liquid propane or natural gas, although it is unlikely that all of the furnaces still are functional because of their age. The furnaces were sold exclusively for use in mobile homes either as original equipment or as replacement appliances. Mobile home owners should check their gas furnaces for the presence of the "Miller" brand name on the top of the louvered door. Consumers then should identify whether they possess an MMG model by opening the door and determining whether the large vertical pipe inside is approximately five inches across (see attached drawing). If so, consumers should call the manufacturer's toll-free number at l-800-253-3874 (in Michigan, call collect at 1-616-394-4326). The firm will arrange for free installation of a new flue-pipe extension. Consumers who are uncertain whether they own an MMG model gas furnace after inspecting the interior pipe are encouraged to contact the manufacturer's toll-free number for assistance in identifying their furnace. CPSC also is reminding consumers that all gas furnaces require periodic inspections and maintenance by qualified personnel in order to detect such hazards as vent pipe corrosion. Consumers should contact their local heating contractor for suggestions on arranging such inspections.
Sweatshirts Recalled by Grace NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE April 15, 1981 Release # 81-015 Recall Of 40,000 Sweatshirts Announced Due To Potential Fire Hazard WASHINGTON, D.C. (April 15)-- About 40,000 recreational sweatshirts made in China and distributed nationally by a New York importer are being recalled because they fail to meet federal flammability standards. The recall is being conducted by the importer, Grace International Apparel, Inc., of New York City, in cooperation with the U.S. Consumer Product Safety Commission. The garments were distributed between June and October, 1980. Each sweatshirt was manufactured with a snapped inner surface, a hood, a zipper and a drawstring; tests showed that the inner surfaces of the sweatshirts are too flammable. A label sewn into each sweatshirt reads "Made in the People's Republic of China CA VA." A second label also is attached to each sweatshirt which reads "CA VA *** A product of G.I.A.I., 350 Fifth Ave." The garments were distributed throughout the United States through 20 direct consignees based in California, Georgia, Florida, New Jersey, New York, North Carolina and Pennsylvania. One of these was a large New York City-based chain of stores, Korvettes, which no longer is in business. Consumers are being advised to return the garments to the store from which they purchased them to obtain full refunds. In the case of sweatshirts purchased from Korvettes, consumers should mail them directly to Grace International Apparel, Inc., Room 7401, Empire State Building, 350 Fifth Avenue, New York, New York, 10001. The company has agreed to refund the purchase price ($5.99) plus any appropriate shipping charges.
Kits For Electrical Test Meters Recalled by Radio Shack NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE February 2, 1981 Release # 81-007 Shock Hazard Results In Recall Of Radio Shack Kits For Electrical Test Meters WASHINGTON, D.C. (February 2) -- More than 150,000 lead kits for electrical test meters are being recalled by Radio Shack, of Fort Worth, Texas, because they may pose a shock hazard to consumers. The recall is being conducted voluntarily in cooperation with the U.S. Consumer Product Safety Commission. Radio Shack is a division of the Tandy Corporation. Each kit consists of 11 separate pieces, including two probes which are plugged into lead wire tips and used to test electrical current. Each probe is designed in such a way that metal remains exposed even when it is fully inserted into the lead wire tips, thus posing a potential shock hazard to users. One consumer has reported receiving a shock from the product. The kits were manufactured from 1971 through June, 1980, and were sold nationwide in Radio Shack retail stores for $4.99 each. They can be identified by catalog number 270-332 which appears on the package. Consumers should return their kits to the nearest Radio Shack store for a full refund. For information on store locations, consumers should consult their local telephone directories or write to Radio Shack, One Tandy Center, Floor 1800, Fort Worth, Texas, 76102. Consumers wishing to verify the model number should contact CPSC's toll-free Hotline at 800-638-2772.
LP Gas Water Heater Controls Warning/Correction NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE January 29, 1981 Release # 81-005 Robertshaw Company Issues New Warning On Explosion Hazard In 1,000 LP Gas Water Heater Controls WASHINGTON, D.C. (January 29, 1981) -- The manufacturer of "Unitrol" fuel control mechanisms used on certain liquid propane gas water heaters is renewing its efforts to publicize and correct a potential defect which may cause severe burn injuries and death resulting from explosion and fires. Since 1954, when the fuel controls first were sold to hot water heater manufacturers, there have been at least 48 deaths and 89 severe burn injuries from explosions of water heaters equipped with these gas controls. The program to replace the old gas controls with new ones is being conducted by the Robertshaw Controls Company of Richmond, Va., in cooperation with the U.S. Consumer Product Safety Commission. The manufacturer also is reissuing a national alert to warn consumers of the severe risk posed by continued use of water heaters equipped with the controls. The warning covers the "Unitrol" model 110 and model 200 gas controls used to regulate the flow of LP (liquid propane) gas to water heaters. These controls, manufactured about 25 years ago by Robertshaw's Grayson Controls division, of Long Beach, California, contain a potentially defective valve which could cause a gas leak and subsequent explosion and fire. Approximately 1,000 of the potentially defective controls still are believed to be in use nationwide. Many of these controls may be found on water heaters located in rural areas, such as in farm homes, in vacation or weekend homes, or in hunting or fishing camps. (LP gas commonly is used to fuel appliances in rural areas due to the unavailability of natural gas lines.) The potentially defective controls were sold to approximately 110 water heater manufacturers from December, 1954, through February, 1957. The controls include Unitrol models 110 and 200 showing any date code which includes the letters W or X, or the letter combinations LV, AY, BY or CY. Consumers can identify the affected units by looking for "Unitrol 110" on the face of the control, or for "Unitrol 200" on the temperature dial on the front of the control. The controls are located near the bottom of the water heater. Date codes are stamped next to the gas pilot outlet which is located on the bottom side of the control and to the right. Use of a small mirror will aid consumers in reading the date code more easily. In 1974, Robertshaw notified CPSC of the potential defect in the gas controls, and subsequently instituted a program to repair the devices. Consumers who own LP gas water heaters should check the heater control to determine if a Unitrol model 110 or 200 with a date code mentioned above has been used. If so, consumers then should contact Robertshaw at its toll-free number 800-421-1130. In California call 800-262-1173. Following a free inspection, the firm will install new controls if appropriate. Anyone wishing to verify the model numbers or the brand name should contact CPSC's toll-free Hotline at 800-638-2772.
Snowmobiles Recalled by Kawasaki NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE January 26, 1981 Release # 81-003 Recall Program To Correct Snowmobiles Arranged By Commission And Kawasaki Motors WASHINGTON, D.C. (January 26) -- Following reports of serious injuries involving snowmobile drive tracks, a three to four million dollar voluntary repair program to correct approximately 16,500 1978 and 1979 model snowmobiles was announced today by the U.S. Consumer Product Safety Commission and Kawasaki Motors Corp. (USA) of Santa Ana, California. CPSC staff learned of the problem with the snowmobile tracks in May, 1980, when the company notified CPSC of several incidents involving bar detachment injuries. To date, CPSC staff has been informed by Kawasaki of approximately 20 such injury incidents, including fractures or severe lacerations which in three cases required the amputation of a finger. These incidents occurred when the snowmobile had been lifted or turned on its side and the track was rotating at high speeds. In settlement of its alleged failure to report promptly to CPSC information which the Commission believes indicated that these snowmobile tracks could pose a substantial risk of injury to the public, Kawasaki has agreed to pay $90,000 to CPSC. The snowmobile tracks involved are the MGB (molded grouser bar) type which were designed and manufactured by Kawasaki and by the Goodyear Tire and Rubber Co. The tracks have experienced detachment of the metal bar from the rubber belts of the track. Kawasaki has not used this track on any of its models since 1979. When the bars become partially or completely detached from the rubber belts and when the snowmobile is lifted or turned on its side exposing the rotating track, bars can strike the hands, legs or feet of a person who is lifting the snowmobile or standing next to the rotating track. Kawasaki is notifying by mail all snowmobile owners with registered warranties for the 1978 and 1979 Invader and Intruder models, informing them of the safety hazard and the company's track replacement program. Notice also will be given through Kawasaki dealers nationwide. Kawasaki has agreed to replace, free-of-charge, all MGB tracks on the 1978-79 Intruder and Invader models with its current model track which has no bars. The company estimates that the replacement program will cost between $3 million and $4 million. Owners of these snowmobile models are being urged to contact their local Kawasaki dealer promptly (but no later than June 30, 1981) for information on the track replacement program. Track replacement will be performed by Kawasaki dealers as the replacement tracks become available from the manufacturer. In connection with the $90,000 payment and the voluntary corrective action plan, Kawasaki denies that there was any failure to report information as required by law, and further denies that any substantial risk of injury exists.