Loading...
Loading...
All product recalls associated with Hydro Air.
Total Recalls
2
Past Year
0
Class I (Serious)
0
Most Recent
Feb 1997
Data from FDA, USDA, CPSC, and NHTSA public records. Recall counts vary by company size, industry, and reporting practices. Always check official sources for current information.
Spas, Hot Tubs, and Swimming Pools Drain Covers Recall NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE CONTACT: February 3, 1997 (301) 504-7908 Release # 97-065 CPSC and Hydro-Air Industries Recall Main Drain Covers in Spas, Hot Tubs, and Swimming Pools WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Hydro-Air Industries of Orange, Calif., is recalling about 206,000 (model 10-6200) main drain covers in spas, hot tubs, and swimming pools. Hydro-Air's model 10-6200 drain cover is designed to cover pipes carrying water out of spas, hot tubs, and swimming pools. Under certain circumstances, a bather's head can be held under water if the bather's hair becomes entangled in the drain cover as the water and hair are drawn through the drain. Hydro-Air is aware of two drownings and one near drowning resulting from hair getting trapped in the drain cover. Hydro-Air's model 10-6200 drain cover is a white circular plastic disc, measuring 6 inches in diameter with 18 rectangular openings on top. Each rectangular opening measures 3/4 inch long by 5/16 inch wide. "Hydro Air P/N 10-6200" is imprinted on the top of the cover. This drain cover was installed in spas, hot tubs, and swimming pools from 1980 to 1995. Consumers should inspect their spas, hot tubs, and swimming pools to determine if the model 10-6200 drain cover is installed. If so, consumers should immediately stop using their spas, hot tubs, and pools and contact Hydro-Air at (800) 230-9560 to receive a free replacement part. Swimming pool owners can contact Hydro-Air at (800) 230-9560 for guidance in the inspection process. Consumers should not use their spas, hot tubs, and swimming pools until the replacement part has been installed. If consumers choose to use their spas, hot tubs, and pools before the replacement part is installed, consumers should use extreme caution and follow these precautions: Keep long hair away from the main drain cover. Wear a bathing cap or pin hair up. Never allow a child to play in a way that could permit the child's hair to come near the main drain cover. Always supervise children around a spa, hot tub, or swimming pool. If the main drain cover is missing or broken, shut down the spa, hot tub, or swimming pool until the cover is replaced. Know where the cut-off switch for the pump is located, so that you can turn it off in an emergency.
Hot Tub Suction Drain Fittings Recalled by Hydro Air NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE May 28, 1982 Release # 82-023 Recall Of Hot Tub, Spa, Whirlpool Suction Drain Fitting Because Of Hair Entrapment WASHINGTON, D.C. --The U.S. Consumer Product Safety Commission in cooperation with Hydro Air Industries Inc., Orange, California, today announced a voluntary recall of approximately 125,000 suction drain cover fittings for spas, hot tubs and whirlpools because of the danger of hair entrapment. Three incidents have occurred when pre-teenage girls put their heads under water and their long hair became entangled in the suction drain cover fitting. Two incidents resulted in death by drowning, and in one incident the victim was pulled free. Water is drawn from the spa through 3-5/8 inch plastic suction fitting or drain covers located on the wall of the spa l-3 inches from the bottom. A powerful strong suction exists at the water outlet suction fitting or drain cover when the high speed whirlpool suction is turned on. The Hydro Air suction drain cover fittings can be identified by the three slots on the face of the fitting cover. The middle slot measures 3/16 inches by l-1/2 inches and the two slots on either side measures 3/16 inches by l-1/4. These suction/drain cover fittings have been sold nationwide since 1979. Most sales occurred within California, Arizona, Texas and Florida. Consumers should immediately stop using their hot tubs, spas and whirlpools. They should contact the company responsible for the installation, or Hydro Air Industries, Inc. (1317 W. Grove, Orange, CA 92665, Telephone: 714-974-1920, call collect), to determine whether their unit has a defective suction/drain cover and to make arrangements for a free replacement.