Loading...
Loading...
All product recalls affecting Arizona.
Includes nationwide recalls (tagged “Nationwide”) and recalls with Arizona in the distribution area.
April 24, 1978 Release # 78-026 Gas Valves Prompt Warning WASHINGTON, DC (Apr. 24) -- The U.S. Consumer Product Safety Commission (CPSC) today warned consumers that certain manually operated gas valves, imported since 1976 may leak, creating the possibility of fire or explosion in the home. Hundreds of thousands of these valves have been distributed nationwide. The suspect gas valves, used to shut off the gas supply to gas appliances, have reportedly been involved in two fires and 15 gas leaks in Sacramento County, California. The CPSC staff is currently investigating these reports and attempting to identify all importers of the gas valves. According to Commission staff, the defective valves, all manufactured in Taiwan, are believed to have been imported and distributed by a number of firms since early 1976. The valves can be identified by the number "3/4" or "l/2" stamped on the side of the unit and the word "Taiwan" on the unit's washer. However, gas valves manufactured in Taiwan by other companies could bear similar identification. If you live in a house built or remodeled since early 1976 which uses gas appliances or in a home where new gas appliances have been installed, check your gas lines to see if one of the defective valves has been used. If you are not sure where to look for the valves, contact your builder, gas appliance installer or local gas company for help. You should call your local gas company if you suspect one of the defective valves is in your house or if you smell gas. Anyone aware of a fire or gas leak stemming from a defective valve should report the incident to CPSC's toll-free hotline by calling 800/638-2772
G.L. Electric Flasheat Water Heaters warning NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE April 24, 1978 Release # 78-024 Shock Hazard Tied To Water Heaters WASHINGTON, D.C. (Apr. 21) -- The staff of the U.S. Consumer Product Safety Commission (CPSC) today warned consumers that certain portable, immersible electric water heaters manufactured by G.L. Electric Flasheat Co., Harper Woods, Mich., may cause serious electric shock during use. An identically designed electric water heater made by another company was reportedly involved in the electrocution of a teenage girl last year. The heaters are sold, among other things, to heat water in the bathroom and kitchen. They are plugged into a standard electrical outlet and consist of an exposed resistive heating element contained either inside a cylindrical perforated metal case or within two round, flat porcelain shells open around the edge. Both types allow water to flow inside the casings and directly into contact with the heating element, thus presenting a dangerous shock hazard if the heaters are on. Consumers are warned that they may be electrocuted should they touch the water container or the water itself while the heater is on. The heaters in question include the "Fast Heat," model 401. Models 501 and 101 have the perforated metal case and model 401,the two porcelain shells. The heaters are sold nationally, primarily in hardware stores and tack shops. On March 24,1978, the Commission authorized its staff to bring an administrative proceeding against G.L. Electric Flasheat Co.. to remove these products from the marketplace. Anyone aware of shocks or electrocutions from one of these immersible electric water heaters should report the incident by calling CPSC's toll-free Hotline at 800/638-2772.
Sump Pumps Repaired NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE April 24, 1978 Release # 78-025 Sump Pumps Pose Shock Hazard WASHINGTON, DC (April 24) -- The U.S. Consumer Product Safety Commission (CPSC) today announced that certain upright, pedestal sump pumps having solid black plastic float switches positioned on top of the pump motor may present an electric shock hazard. The models in question are SW-500, BPV-500 and PSP-330 sold under the following brand names: Agway, American Jet Stream Pump, Hydro-Lux, Menards, Super Flo, True Value Sump Pump, Wayne, and Wheatbelt. Anyone having one of these pumps should immediately disconnect the motor from its power source and contact the place of purchase for a free, simple repair to remove the possible hazard. Retailers have been advised of the possible hazard and have been sent repair instructions. If there are any questions concerning this problem, retailers should immediately contact their supplier. Pumps bearing bright metal float switches on top of the motor do not pose the possible shock hazard. While only a few of the approximately 5,600 pws that were distributed to retailers have been sold, consumers are warned that the installed location of the pumps in or around water increases the danger of electrical shock. No injuries have been reported to date.
April 17, 1978 Release # 78-022 Flammable Sweatshirts Recalled WASHINGTON, D.C. (Apr.17)-- The U.S. Consumer Product Safety Commission (CPSC) and the SAN FRANCISCO SHIRT WORKS, INC., announced today that the San Francisco Shirt Works is voluntarily recalling and refunding the purchase price on four styles of ladies' sweatshirts because they fail to comply with Federal flammability standard. If exposed to an ignition source such as a cigarette ash, an open flame, or any spark, they could ignite and burn with a rapid and intense flame. (No injuries have been reported to date.) These sweatshirts were sold by department stores and specialty shops throughout the nation as part of the company's 1977 holiday line. Some 22,500 of these ladies' sweatshirts were imported by San Francisco shirt Works, Inc., from a Hong Kong manufacturer and distributed nationwide to retailers during October and early November 1977. Shirts which appear to be identical but which were delivered to retailers in approximately July of 1977 have passed the flammability test required by the standard. Only those shirts sold to retailers during and after October 1977 fail to comply with the standard. All the ladder's shirts are 100% cotton, fleecy side out, with long sleeves. Sewn-in labels at the back of the neck say "SAN FRANCISCO TEA PARTY: with a cablecar woven in the label. The identifying labels also say "Made in Hong Kong". These sweatshirts were available in winter white, pink, yellow, peach, blue, and chamois. The following styles of "soft to touch" sweatshirts fail to comply with the Federal Standard for Flammability of Clothing Textiles: 2115--Regular collar, patch on sleeve and pockets of same color, snap fasteners, and pull string tie at waits;2116--Pullover, with small center pockets for hands;2184--Hooded, with pull string tie on neck and wait-front snaps, one pocket;2185--Zippered front, regular collar, two front pockets. Style numbers appeared on "hang tags" at the time of sale and would have been removed before wearing. The company will refund to consumers the purchase price of suspect garments. Persons who believe they have these sweatshirts should write for refund procedures to: San Francisco Shirt Works, Inc.Attn. Nancy Bush1111 -17th StreetSan Francisco, California 94107 Or they may call CPSC's toll-free Hotline (800)638-2772 for refund instructions. CPSC strongly urges consumers who bought any of the described shirts during and after October 1977 to immediately stop wearing them and start the refund process. CPSC believes that spring weather will increase the burn danger because of camping, barbeques and other outdoor activities and hopes women will take the initiative to return the potentially hazardous sweatshirts. This is the first time the company's products have been the source of such hazards. the company has been taken steps to avoid similar safety problems in the future by testing for flammability safety all fabrics to be used prior to each production order. Additionally, the firm has permanently dropped the suspect fabric from its line of products and will not reorder the same fabrication from the manufacturer. The firm had changed Hong Kong manufacturers for the subject holiday line, and did not know the fabrics obtained from the source had not been tested for flammability compliance, which had been a standard procedure with its previous imports. Their new procedures should eliminate this possibility
Baseball Pitching Machines Warning NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE April 14, 1978 Release # 78-021 CPSC Warns On Hazardous Baseball Pitching Machines WASHINGTON, DC (April 14) -- The Consumer Product Safety Commission (CPSC) today warned the public not to use certain unguarded automatic baseball pitching machines which it considers extremely hazardous. The Commission advises anyone having possession of such unguarded machines to place these machines in a locked storage area where unwary persons will not have access to them. The machines, which were sold to schools, recreational organizations and individuals, may be labeled "Dudley" or "Commercial Mechanisms." In a lawsuit filed in U.S. District Court, the Commission alleges that the unguarded, rotating metal pitching arm can go off suddenly, without warning, and strike persons standing in the path of the arm. The Commission alleges that this has happened in numerous incidents even though the machines were unplugged or turned off. Everyone should be careful of pitched balls. However, the hazard addressed in this action relates to the unguarded arm. The Commission has received numerous reports of serious injuries -- including paralysis, skull fractures, brain damage, loss of sight, and other severe injuries such as broken bones -- suffered by persons hit by the pitching arm. In one reported incident, a nine-year-old boy was left a permanent paraplegic as a result of being hit in the head by the pitching machine. According to reports received by the Commission: baseball coaches, high school students, "Little League" instructors, and even small children who have come up to the machine just to look at it, have been seriously injured. These reported injuries have occurred on school grounds, in city parks, and at private homes. Reportedly, about 7,500 of the baseball pitching machines were manufactured between 1956 and 1975 and distributed nationwide. The majority of the owners appear to be institutions such as schools and "Little League" teams, but some machines are privately-owned. The machines were sold under various brand names including: "Olympia, " "Olympic," "Champ," "Blazer," "Super Blazer," "Pro-Blazer," "Range Blazer, " "Range, " "Master," "Mentor," "Pro-Trainer," and "Professional." The pitching machines are operated by electricity or gasoline engine. Even when the machine is turned off or unplugged, however, if the pitching arm is cocked in approximately the "10 o'clock position," the machine can fire if jarred or subjected to vibration. Consequently, the Commission warns that the machines should be locked up to prevent accidents and should never be left in areas where children can reach them. Before locking up the machine, CPSC advises that the pitching arm cable be disconnected carefully from the coil spring. The Commission has filed a lawsuit in the U.S. District Court for the District of Columbia seeking to compel the manufacturer and distributors of the machines to provide a guard for the pitching arm at no cost to the purchaser. Without such a guard, the Commission warns, the machines are dangerous and may cause severe injury. The Commission urges people not to use these machines.
Water Wiggle Toy Recalled by Wham-O NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE April 13, 1978 Release # 78-020 Recall Of Wham-O Water Wiggle Toy WASHINGTON, D.C. (Apr. 13) -- Wham-O Manufacturing Co., San Gabriel, Calif., in cooperation with the U.S. Consumer Product Safety Commission, today announced it is voluntarily stopping sale and recalling its "Water Wiggle" toy. Approximately 2 1/2 million of these toys have been sold throughout the United States over the past 17 years. The toy consists of a seven-foot plastic hose attached to an aluminum water-jet nozzle which is covered by a bell-shaped plastic head. The toy is designed to be attached to a garden hose for water fun. It retails for approximately $3.50. Wham-O stated that the recall is occasioned by the death of a four-year-old child in March 1978. The youngster was playing with some other children in his backyard with a dismantled "Water Wiggle," one from which the bell-shaped head had been removed or had come off. The exposed aluminum nozzle became lodged in his mouth and he drowned. Wham-O stated that it had no knowledge of how or why the toy was dismantled or how the nozzle became lodged in the child's mouth. A "Water Wiggle" was involved in a similar death of a three-year-old boy in 1975. Parents are advised not to allow their children to play with this product. Wham-O requests its retailers to remove all "Water Wiggles" from their shelves. Consumers who own a "Water Wiggle" toy should return the product to the retail store where purchased for a full refund or credit toward another product. Consumers requiring information concerning this recall should contact the Customer Service Department, Wham-O Manufacturing Company, 835 East El Monte Street, San Gabriel, California 91778 (toll free numbers 800/423-4592 and 800/423-4593) or call the U.S. Consumer Product Safety Commission toll-free hotline 800/638-2772.
Crib Teething Rails Recalled by Okla Homer Smith Furniture NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE July 13, 1978 Release # 78-063 Crib Teething Rails Recalled WASHINGTON, D.C. (July 13) -- Okla Homer Smith Furniture Manufacturing Co., Inc., Ft. Smith, Ark., in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced a recall and replacement program for plastic teething rails on about 70,000-80,000 full-sized baby cribs made by the company. The cribs have been sold under about 180 model numbers by numerous department and baby furniture stores across the country, including Sears, Roebuck and Co., and Montgomery Ward. A spokesman for the furniture company said the plastic teething rails may become brittle and pose a potential hazard of cracking when chewed. Broken pieces could be swallowed by a teething infant, become lodged in the windpipe or perhaps injure a baby in other ways. The cribs with the teething rails being recalled can be identified by the label, "OKLA HOMER SMITH FURNITURE MANUFACTURING CO., INC.," on the inside of the headboard near the bottom, and a numerical manufacturing date for the period June 1976 through December 1976, ink-stamped underneath the headboard. Only cribs made in the June-December 1976 timeframe carry the potentially defective teething rails. Since the model numbers are too voluminous to list here, it is important that consumers look for the manufacturer's label and the manufacture date to see if they own one of the cribs. All of the cribs are wooden, and almost all of the teething rails are white, with about one percent being red. The cribs ranged in price from $50-$100. New rail covers can be obtained free-of-charge by contacting the retailer, or Okla Homer Smith at P.O. Box 1148, Ft. Smith, Ark. 72902. Consumers should be prepared to provide their names, addresses, whether the cribs are single - or double-drop-side units, and whether teething rails are present on the end panels. Since the teething rails can crack at any time, anyone owning one of the cribs is entitled to free replacement rail covers even if the teething apparatus currently does not show signs of brittleness.
Hot Pots Recalled by Nevco NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE March 17, 1978 Release # 78-017 Electric Hot Pot Recalled WASHINGTON, D.C. (Mar. 17) -- Nevco, of Lyndhurst, N.J. in cooperation with the Consumer Product Safety Commission, today announced the voluntary recall of 217,000 electric ceramic hot pots. The pots, intended for heating up to 4 cups of liquid such as water or soup, may pose a potential shock hazard to the user. According to CPSC staff if the heating coil at the bottom of the pot is heated while not immersed in liquid, the coil will be damaged. If a user, while grounded, should subsequently stir the liquid in the pot using a metal article, the user could receive a potentially severe electrical shock. These hot pots come in various color combinations and are decorated with several different types of decals. The box in which the unit is packaged is clearly marked with the Nevco name. On the bottom of each unit are imprinted the words "120V-350W JAPAN." They have been sold nationwide under the Nevco name since January 1975, and have retailed from $2.99 to $4.99. Because these same unbranded pots have been imported and distributed by other yet unidentified firms, consumers who do not have the box are asked to contact the dealer from whom they purchased the pot or Nevco to confirm that this is one of the pots on which refund can be given. If so, the consumer should return the hot pot to Nevco, Page & Schuyler Avenues, Lyndhurst, N.J. 07071, with a statement of where the pot was purchased and the amount of the purchase price (and if available, a copy of the sales receipt, the box in which the unit was packed or other documentation of purchase) for a refund, including postage. If a consumer determines that his or her hot pot is not a Nevco pot but otherwise matches the description given above, the consumer is urged to discontinue use and to notify the Commission of the name of the importer or distributor using the toll-free number listed below.
Pellet Pistols Repaired by Crosman Arms NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE March 2, 1978 Release # 78-015 Repair Program For Hazardous Pellet Pistols Announced WASHINGTON, D.C. (Mar. 2) -- The Consumer Product Safety Commission (CPSC), in cooperation with Crosman Arms, a division of the Coleman Company, Inc. announced today that certain single shot, pump-up pellet pistols may discharge accidentally due to inadequately tightened screws. Approximately 35,000 Model 1377 "American Classic" and Model 1322 "Medalist" pistols are suspect. They were distributed during 1977 and through January, 1978 and may have an improperly installed screw. These pistols operate normally at first but, repetitive use may cause the grip frame to loosen. If this occurs, there are three possible consequences: The pistol cannot be cocked and is inoperative unless manually held together. It can be cocked, but may discharge with the safety on. It can be cocked and may discharge without the trigger being pulled. To prevent this from happening, Crosman advises owners of the pistols to take their pistols to any Crosman authorized service center. A list of those service centers was provided with each pistol. The pistols should not be used until examined by a Crosman representative. All Model 1377 and 1322 pistols should be examined. Models produced after January, 1978 DO NOT contain the defect and are identified by an "R" stamped on the pistols and on the outside of the pistol carton. The service will be performed at no cost to the customer. For more information or for the name of the nearest service center, contact Crosman Arms, 980 Turk Hill Road, Fairport, New York 14450. Telephone (716) 223-6000.
Baby Cribs Modified by Bassett NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE February 21, 1978 Release # 78-014 Modification Of Baby Cribs Announced WASHINGTON, D.C. (Feb. 21) -- Bassett Furniture Industries, Inc. and the U.S. Consumer Product Safety Commission (CPSC) today jointly announced the company's continuing voluntary notification program which is aimed at advising some 1,654 purchasers of certain Bassett Cribs that modification kits are available free of charge. The Commission urges that the kits be used to correct a potentially dangerous design problem. Bassett Cribs with model numbers 5028 and 5127 were produced with a cut-out design in the headboards and footboards. The Commission believes that infants may be entrapped and strangled while standing in the cribs because it has received and investigated two such reports. Bassett stopped manufacturing these models when the company learned of the first such incident and has undertaken a nationwide program to advise consumers, retailers, and salespeople that a free modification kit is available from retailers. The company believes that the majority of these cribs sold nationally have already been modified or returned. The model numbers of the cribs being modified are 5028-505 and 5028-510, both stained in maple; and 5127-505 and 5127-510, both stained in pine. No other models of Bassett cribs are involved. The model numbers are printed on adhesive labels affixed to the headboards of the cribs below the mattresses. These cribs retailed for approximately $100 each and were sold nationwide from December 1975 to mid-October 1977. Bassett has removed the cut-out design from its product line and has shipped to all stores which received these cribs a modification kit to close the openings in the headboards and footboards. Bassett has directed these stores to contact owners of the cribs to arrange for free installation of the modification kits. Consumers who have one of these unmodified cribs should immediately contact the store where purchased to arrange for free installation of this kit. If that is not possible contact the nearest Bassett retailer by checking your local phone directory or call Bassett collect at area code 703/629-7511, ext. 340. Caution should be exercised in the use of these cribs until the modification kit is installed. Information on this modification is also available by calling the Commission's toll-free HOTLINE at 800/638-2772.
Nobility Coffeemakers Recalled NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE February 3, 1978 Release # 78-012 Recall Of Coffeemakers Announced WASHINGTON, D.C. (Feb. 3) -- The U.S. Consumer Product Safety Commission (CPSC) today announced the recall of approximately 14,500 Nobility-brand 10-cup Automatic Coffeemakers, Model # 151, because they pose a potential fire hazard. According to the Commission staff, a defect in the internal construction may cause corrosion of the metal bracket which holds the thermostat against the heating element. When this happens, the thermostat will fall away from the heating element and the unit will remain in a constant "On" position, generating unnecessary heat until it ignites the plastic case. Consumers who own a Nobility coffeemaker, Model #151, should stop use immediately and return the unit to the store where purchased for a full refund. All coffeemakers involved in the recall have the name "NOBILITY" written across the front of the upper section of the unit where the water is added. Etched into the metal plate at the base of each coffeemaker are the words: UL LISTED 4293, MADE IN SINGAPORE, DO NOT IMMERSE IN WATER, and E57635 MODEL 232. (This model number is not to be confused with Model #151 which is printed only on the box in which the coffeemaker is packaged). The units have been sold nationwide under the Nobility name since approximately June 1976, and retailed for about $16.50. These same coffeemakers have been imported and distributed by other as yet unidentified firms under different brand names. All units, however, bear the same inscriptions on the base plate. Consumers who have coffeemakers that are not Nobility but otherwise match the above description should discontinue use and notify the Commission of the brand name of the unit and the place of purchase by calling the Commission's toll-free hotline at 800/638-2772.
January 3, 1978 Release # 78-001 Decorative Christmas Light Bulbs Recalled WASHINGTON, DC (Jan. 3) -- Le Gran Imports, Long Beach, California, and the U.S. Consumer Product Safety Commission (CPSC) today announced that Le Gran Imports is voluntarily withdrawing from sale certain imported Christmas light replacement bulbs which were made in Taiwan. The Commission staff discovered a defect in some of the bulbs which could create a fire or shock hazard when electrical current is first applied. The defect is a thin strand of wire approximately l/4" in length or longer, which may protrude from the side of the bulb base or from the solder tip at the base of the bulb. Consumers who may have purchased these replacement bulbs are urged to immediately inspect them to see if a thin strand of wire is protruding from the side of the bulb base or from the solder tip at the base of the bulb. If a protruding wire is present, the bulb is defective and should not be used. The consumer should return the defective bulbs to the place of purchase for exchange or refund. The bulbs subject to the defect are identified on the package as Item No. LC-7005P size 7 l/2. The words "Christmas Lamps" and the name "Le Gran Imports" also appear on the package. The bulbs, sold five to a package, retailed for approximately $.75¢ or less and were sold nationwide. Le Gran Imports and the Commission warn that other distributors may have imported these same bulbs from Taiwan and may be selling them under different brand names. The consumer is cautioned to inspect all such replacement light bulbs before installing them in decorative lighting fixtures
Scuba Regulators Replaced by Parkway Fabricators NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE December 27, 1977 Release # 77-131 Safety Replacement Program WASHINGTON, D.C. (Dec. 27)-- The U.S. Consumer Product Safety Commission (CPSC) and Parkway Fabricators of South Amboy, N.J. today announce a voluntary part-replacement program of 2000 "Poseidon" brand "Cyklon 300" model regulators for SCUBA diving systems sold in 1974. The regulators manufactured in Sweden by Poseidon Industries AB, imported and distributed nationwide by Parkway Fabricators can be identified by the "Poseidon" brand name, the "Cyklon 300" model name and the following serial number ranges: 15024 through 16523 and 18050 through 18549. The brand name is embossed on the purge button and the serial number is located on the first stage of the regulator. The intermediate air hose on these regulators may become disconnected from its fitting due to a defect in the hose material. If the fitting disconnects while the unit is submerged, air flow to the diver would be cut off. Consumers are warned to immediately stop using these regulators. The company is providing free replacement hoses to all consumers who own one of the affected regulators. To obtain the replacement hose, consumers should write to Parkway Fabricators, # 1 Raritan Street, South Amboy, N.J., attn: Cyklon 300 Recall, and provide his or her name, address, telephone number and the serial number of the regulator. A replacement hose along with instructions for installation will be mailed to each owner. In addition, Parkway has sent direct notification to the approximately 80% of the purchasers of the regulators who have filed warranty cards with the firm. Parkway is also notifying its dealers nationwide and is providing them with posters to warn customers not to use the regulator until a replacement hose is provided. The firm is aware of approximately 20 instances when the intermediate air hose on the regulator has become disconnected from its fitting. However, no injuries have resulted to divers as a result of this problem. Consumers who require additional information should contact Ken Musiak, Parkway Fabricators, # 1 Raritan Street, South Amboy, N. J., telephone 201/721 -5300.If consumers are unable to contact Parkway Fabricators, they may contact CPSC at 800/638-2772.
Christmas Light Sets Recalled by New York Merchandise NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE December 22, 1977 Release # 77-130 Christmas Light Sets Recalled WASHINGTON, D.C. (Dec. 22) -- The U.S. Consumer Product Safety Commission (CPSC), in cooperation with New York Merchandise Co., Inc., today announced that New York Merchandise will voluntarily stop sale of their 15-bulb "Renown" Christmas tree light sets, model number 222/15B, indoor only. The Christmas light sets, retail for $4.50-$5, are packaged in a white and red cardboard box with a clear cellophane window, and were distributed nationwide. The bulb sockets in these sets may contain incorrectly placed metal electrical contacts that may create a potential fire hazard by shorting out the bulb and overheating the wires. The company urges consumers who have purchased one of these light sets to carefully examine the inside of each socket, noting the placement of the two metal electrical contacts. If correctly constructed, one metal contact is mounted horizontally across the inside base of the socket and the other stands vertically along the inside wall. If both contacts are in the vertical position, the set is defective and should not be used. Consumers can return a defective set to their dealer for a full refund or replacement. Anyone wishing additional information should write to New York Merchandise Co., 32 W. 23rd St., New York, N.Y. 10010, or call the company at 212/675-3500.
December 21, 1977 Release # 77-128 WASHINGTON, D.C. (Dec. 21) -- Market Research Imports (MRI), Incline Village, Nevada, and the U.S. Consumer Product Safety Commission today announced that MRI is voluntarily withdrawing from sale certain imported Christmas light replacement bulbs which were made in Taiwan. MRI discovered a defect in some of the bulbs which could cause them to shatter with explosive force when electrical current is first applied. The defect is a thin strand of wire approximately l/8" to l/4" in length, which may protrude from the solder tip at the base of the bulb. Consumers who may have purchased these replacement bulbs are urged to immediately inspect them to see if a thin strand of wire is protruding from the solder tip at the base of the bulb. If a protruding wire is present, the bulb is defective. The defect may be safely removed by simply snipping off the protruding wire at the solder tip with a pair of. scissors or pliars with cutting edges. The consumer may also elect to return the defective bulbs to the place of purchase for exchange or refund. Two models of bulbs are subject to the defect, and are identified on the package as Item No. LC-9004 size 9 l/4, and Item No. LC-7004 size 7 l/2. The words "Replacement Bulbs" and the letters "MRI" also appear on the package. The bulbs, sold four to a package, retailed for approximately $1.00 or less and were sold nationwide. MRI and the Commission warn that other distributors may have imported these same bulbs from Taiwan and may be selling them under different brand names. The consumer is cautioned to inspect all such replacement light bulbs before installing them in decorative lighting fixtures
Refrigerator repaired by Kelvinator NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE December 20, 1977 Release # 77-127 Refrigerator repair program announced WASHINGTON, D.C. (December 20) -- The U.S. Consumer Product Safety Commission (CPSC) and Kelvinator Appliance Co. today announced that Kelvinator is voluntarily modifying 1,508 of its 14-cubit-foot refrigerators because they present a possible shock hazard if not properly grounded and that all but 341 of the refrigerators have already been modified. These refrigerators may contain an improperly placed heater wire which could, under sane circumstances, contact the refrigerator's cabinet or evaporator, thereby presenting a possible shock hazard to a consumer touching the refrigerator. The company emphasizes that no shock incidents have been reported regarding the refrigerators. The 14-cubit-foot refrigerators subject to the modification are identifiable by model number TPX140MN, manufactured between October 19 and November 11, 1977. Only those refrigerators bearing a 10-digit serial number beginning with 107 are affected. Consumers are instructed to find the model and serial numbers on the serial plate located on the lower left-front comer of the refrigerator above the kick- plate grating. The serial plate is visible only when the refrigerator door is Open- In opening the door to view the serial plate, the consumer is cautioned not to touch any other kitchen appliance, including the kitchen sink. Consumers who have a TPX140MN 14-cubic-foot refrigerator within the indicated serial number block should contact the dealer from whom it was purchased for inspection and repair, if necessary, at no charge to the consumer. If consumers are unable to contact the dealers, they may contact Kelvinator at 616-455-9190. If consumers are unable to contact Kelvinator, they may contact CPSC at 800-638-2772.
Refrigerator Repaired by White-Westinghouse NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE December 20, 1977 Release # 77-125 Refrigerator Repair Program Announced WASHINGTON, D.C. (Dec. 20) -- The U.S. Consumer Product Safety Commission (CPSC) and White-Westinghouse Company today announced that White-Westinghouse is voluntarily modifying 17,508 of its 14-cubic-foot refrigerators because they present a possible shock hazard if not properly grounded. These refrigerators may contain an improperly placed heater wire, which could, under some circumstances, contact the refrigerator's cabinet or evaporator, thereby presenting a possible shock hazard to a consumer touching the refrigerator. The company emphasizes that no shock incidents have been reported regarding the refrigerators. The 14-cubic-foot refrigerators subject to the modification are identifiable by model numbers RT146T, RT145T, RT141T, RT144T, RT14XW and RT14YW, which were manufactured between March 8 and Nov. 11,1977, and distributed nationwide, including Puerto Rico. Only those refrigerators bearing serial numbers commencing with the letters RUD, RUE, RUF, RUG, RUH, RUJ, RUK, RUL, and RTG and followed by five numbers are affected. Consumers are instructed to find the model and serial numbers on the serial plate located on the lower left-front corner of the refrigerator above the kick plate grating. The serial plate is visible only when the refrigerator door is open. In opening the door to view the serial plate, the consumer is cautioned not to touch any other kitchen appliance, including the kitchen sink. Consumers who have a 14-cubic-foot refrigerator within the indicated serial number block should contact the dealer from whom it was purchased for inspection and repair, if necessary, at no charge to the consumer. If consumers are unable to contact their dealers, they may contact White- Westinghouse at 800-245-0600 (Pennsylvania residents 800-242-0580; Puerto Rico residents 733-5143). If consumers are unable to contact White-Westinghouse, they may contact CPSC at 800-638-2772.
Refrigerator Repaired by Magic Chef NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE December 20, 1977 Release # 77-126 Refrigerator Repair Program Announced WASHINGTON, D.C. (Dec. 20) -- The U.S. Consumer Product Safety Commission (CPSC) and Magic Chef, Inc., announced today that Magic Chef is voluntarily modifying 2,607 of its 14-cubic-foot refrigerators because they present a possible shock hazard if not properly grounded. These refrigerators may contain an improperly placed heater wire which could, under some circumstances, contact the refrigerator's cabinet or evaporator, thereby presenting a possible shock hazard to a consumer touching the refrigerator. The company emphasizes that no shock incidents have been reported regarding the refrigerators. The 14-cubic-foot refrigerators subject to the modification are identifiable by model number FB 148, manufactured between Sept. 9 and Nov. 11, 1977. Only those refrigerators bearing serial numbers commencing with the letters RUH, RUJ, RUK and RUL and followed by five numbers are affected. Consumers are instructed to find the model and serial numbers on the serial plate located on the lower left-front corner of the refrigerator above the kick plate grating. The serial plate is visible only when the refrigerator door is open. In opening the door to view the serial plate, the consumer is cautioned not to touch any other kitchen appliance, including the kitchen sink. Consumers who have a model FB 148 14-cubic-foot refrigerator within the indicated serial number block should contact the dealer from whom it was purchased for inspection and repair, if necessary, at no charge to the consumer. If consumers are unable to contact their dealers, they may contact Magic Chef at 615-472-3371. If the consumers are unable to contact Magic Chef, they may contact CPSC at 800-638-2772.
December 16, 1977 Release # 77-124 WASHINGTON, D.C. (Dec. 16) -- Gerico Inc., Boulder, Colorado, in cooperation with the U.S. Consumer Product Safety Commission (CPSC) today announced a voluntary repair program affecting 40,000 potentially defective portable baby strollers. "Gerry Carryfree," model numbers 0-95, 0-99, 0-100, 0-110, and "Sears 'Stroll 'N Fold,' " model number 36443, both manufactured by Gerico may have defective locking devices which could cause the stroller to collapse forward on the child. No injuries have been reported. The potentially defective strollers, all manufactured during a 46-day period between January 10, 1977 and February 25, 1977, can be identified by a 4-digit code number running from 7010 through 7056, stamped on the strap located beneath the stroller seat. The strollers retailed for about $25 each and were sold at Sears and other stores throughout the country. Consumers who have one of these strollers should contact the store where it was purchased or the company, Gerico Inc., P.O. Box 998, Boulder, Colorado 80306. A repair kit will then be provided free-of-charge
December 9, 1977 Release # 77-122 WASHINGTON, DC (Dec. 9) -- U.S. Divers Co., Santa Ana, California, in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced a voluntary recall of all of its scuba regulators sold after December 1, 1976. A very substantial number of regulators is involved. The regulators were distributed nationwide. The recalled regulators may have a potentially defective clamp ring which may cause unseating of the second stage regulator diaphram. The second stage is that portion of the regulator which the diver holds in his mouth. The unseating of this diaphram could result in the regulator being flooded with water and the air flow to the diver being cut off. The recalled scuba regulators were sold under the name of U.S. Divers and/ or the following model names: Conshelf XII; Conshelf Supreme; Calypso J; Calypso IV; Aquarius; Octopus; and Hookah. The model name and/or-U.S. Divers appears on the product on the purge button. Consumers are warned to immediately stop using these regulators. Consumers should return them to an authorized U.S. Divers dealer for free replacement of the clamp ring. Consumers who require additional information should contact U.S. Divers Co., Customer Service Department, 3323 West Warner Avenue, Santa Ana, California 92702 (714/540-8010)