Loading...
Loading...
All product recalls affecting Arizona.
Includes nationwide recalls (tagged “Nationwide”) and recalls with Arizona in the distribution area.
December 8, 1977 Release # 77-120 WASHINGTON, DC (Dec. 8) -- The M.W. Kasch Company, Mequon, Wisconsin, in cooperation with the U.S. Consumer Product Safety Commission (CPSC) today announced the recall of 8,400 sets of wooden toy alphabet blocks. According to CPSC laboratory tests, paint used on some of these blocks has a lead content which exceeds the current permissible level of 0.5%. The agency's lead-in-paint regulation is intended to reduce the risk of lead poisoning in children who may ingest paint chips or peelings. Effective February 28, 1978, the maximum permissible level for paint used on toys manufactured after that date will be reduced to 0.06%. The blocks being recalled were packaged in a plastic bag, either 15 or 28 to a set, with a cardboard label stapled at the top stating "ABC Educational Blocks - Made in Taiwan for Skyline International, Milwaukee, Wisconsin U.S.A." The 15-block set retailed for about $1.35 and the 28-block set for about $3.00. The blocks are painted either red, green, yellow or blue and the letter background is white. The blocks have been sold since March 1976 in the following states: Illinois, Indiana, Iowa, Michigan, Minnesota, North Dakota, Ohio, Oklahoma, Pennsylvania, West Virginia and Wisconsin. Consumers who have a set of these blocks should return them to the store where purchased for a full refund. A pre-Christmas survey by the Commission of 41 retail stores throughout the U.S. turned up other toys which the agency will be investigating further
Toy Golf Clubs Recalled by H-G Toys NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE November 29, 1977 Release # 77-117 Toy Golf Clubs Recalled WASHINGTON, DC (Nov. 29) --The U.S. Consumer Product Safety Commission, in cooperation with H-G Toys of Long Beach, N.Y., today warned consumers of a possible defect in "Par-Golf Toy Golf Clubs," model numbers 721 and 723. Because of faulty staple assembly, the club's metal rod may separate from its handle when swung and thus be propelled into anyone who may be standing in the rod's path. The models in question were shipped into commerce before May 1, 1977. Ghey bear a single staple which fastens the club rod to the handle. Consumers who have purchased the model 721 or 723 toy golf clubs are urged to carefully examine them to make sure the rod is securely attached to the handle. If the connection is weak, consumers are instructed to discontinue use and may return the clubs to their retailer for refund or replacement. The toy golf clubs are packaged in pairs along with two golf balls on a cardboard backing labeled "Par Golf" and "H-G Toys." No identifying markings appear on the clubs or balls themselves. The model 721 and 723 clubs were distributed nationwide and retail from about $1.50 to $2.50 in specialty and variety stores. It is currently not known how many of the toy clubs are still available for purchase by consumers since the products were marketed primarily for sale during the summer season. Consumers who desire additional information should write to H-G Toys, Inc., 750 Park Place, Long Beach, N.Y. 11561.
October 25, 1977 Release # 77-111 WASHINGTON, DC (Oct. 25) -- The U.S. Consumer Product Safety Commission (CPSC), in cooperation with the Crosman Arms Company, a division of The Coleman Company, Inc., announced today the possibility of an inoperative safety in certain BB repeater pistols marketed under the Crosman name. About 25,000 model number 454 repeater pistols were manufactured and distributed nationwide during 1977 for recreational shooting. In a portion of these, an improper dimension on a receiver cover raises the possibility of the pistol discharging when the trigger is pulled with the safety engaged. The company is trying to locate the pistols involved in order to make modifications to eliminate the possible problem at no cost to the consumer. The pistols are identified as Crosman model 454, 16-shot, semi-automatic .177-caliber CO2 powered BB pistols. Suspect pistols can be identified by the first three digits of the serial number. The digits are 477, 577, 677, 777, or 877. The serial number is located on the left side of the pistol just below the name Crosman. Pistols bearing these serial numbers but with an "R" stamped on the right-hand side of the casting under the grip or below the barrel on the front of the receiver have been inspected by Crosman and do NOT contain the possible malfunction. Owners of the pistols are requested to take the pistol to the nearest authorized service center listed on a brochure which was included with the pistol when purchased. Owners may also write the Crosman Arms Company, 980 Turk Hill Road, Fairport, New York 14450 or call the Crosman service department at (716)223-6000
October 21, 1977 Release # 77-110 WASHINGTON, D.C. (Oct. 21) -- The U.S. Consumer Product Safety Commission (CPSC) today warned consumers of a possible serious shock hazard from certain portable, immersible electric water heaters manufactured by the Ambory Corp., of Hazel Park, Mich. One of these heaters was reportedly involved in the recent electrocution of a 17-year-old girl in Little Fork, Minn. Sold to heat water in and around the home, the heaters are constructed of an exposed resistive heating element contained within a perforated metal case which permits water to contact the heating mechanism. This element is powered by electrical current from a standard electrical outlet. Potential for serious shock injuries, possibly resulting in electrocution, exists when water contacts the powered heating element. The four heaters in question are the "Ambory Special," "Jiffy, Jr. ," "Jiffy, Sr.," and "Ram." Distributed nationwide, they are sold primarily in hardware stores and tack shops. CPSC estimates that approximately 50,000 of the immersible water heaters are currently in consumers' hands. On October 20, the Commission authorized its staff to proceed against the Ambory Corp.9 to remove this alleged hazard from the marketplace. CPSC urges consumers to take extreme caution if they use one of these heaters. All four models are sold with instructions warning users not to touch the water container or the water itself while the heater is "on." Consumers are also directed to turn off the heater and unplug it before testing the water temperature. Anyone aware of any shock or electrocution incidents associated with an Ambory immersible electric water heater is urged to immediately call CPSC's toll-free Hotline at 800/638-2772
October 3, 1977 Release # 77-103 WASHINGTON, D.C. (Oct. 3) -- The U.S. Consumer Product Safety Commission (CPSC) in cooperation with the Kentucky Department of Human Resources and the American Printing House for the Blind, today announced the recall of 12 products which have excessive Lead content their paint. The products were produced and distributed nationwide by the American Printing House for the Blind in Louisville, Kentucky, and are intended for use by blind children. these products are not normally found on retail shelves, but are sold by mail order to consumers, school systems, and government agencies. A regulation under the Federal Hazardous Substances Act establishes a 0.5% permissible level for lead in paint to reduce risk of lead poisoning to children who may ingest paint chips or peelings. No injuries or illnesses have been reported associated with the products now being recalled. The products currently under recall are: l-0301 Biological Modelsl-0332 Land Forml-0340 Mitchell Form Setsl-0357 Sports Field fitl-0371 Shape Boardl-0382 Textured Blocksl-0372 Puzzle Form Board Kitl-0872 Sound Matching Board 11l-0108 Large U.S. Mapl-0109 Small U.S. Mapl-0329 Fractional Partsl-0359 Stokes Place Holder Persons who have these products should return them to the place of purchase for replacement or a full refund
Banned "Snoopy" Bank Recalled by Ideal Toy Corporation NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE September 12, 1977 Release # 77-099 CPSC Announces Recall Of Banned "Snoopy" Bank WASHINGTON, D.C. (Sept. 12) -- The U.S. Consumer Product Safety Commission (CPSC) in cooperation with Ideal Toy Corporation, Hollis, New York, today announced the recall of 60,000 banned "Snoopy" toy banks. The paint used on these products has a lead content which exceeds the Commission permissible level of 0.5%. Effective February 28, 1978, the maximum permissible level for paint used on toys manufactured after that date will be reduced to 0.06%. The agency's lead-in-paint regulation is intended to reduce the risk of lead poisoning in children who may ingest paint chips or peelings. No injuries or illnesses associated with these toys have been reported to the Commission. A routine check by Ideal revealed the excessive lead content in the paint. The multicolored banks are approximately six inches high and represent the "Snoopy" character in the following costumes or poses: Snoopy "Joe Cool" Bank Snoopy Santa Bank Snoopy in Tuxedo Bank Snoopy Dog House Bank Model #5272-0; Model #5270-4; Model #5273-8; Model #5271-2. Persons who have these banks should return them to the place of purchase for a full refund. For further information, consumers can call Ideal collect at (212) 454-5000.
September 2, 1977 Release # 77-096 WASHINGI'ON, D.C. (Sept. 2) -- The U.S. Consumer Product Safety Commission (CPSC) has culminated a major regulatory proceeding by issuing a final ban on lead-containing paint and on toys and furniture coated with such paint. This action was taken to reduce the risk of lead poisoning in children who may ingest paint chips or peelings. Until now, the maximum level of lead allowed in consumer paints has been 0.5 percent. CPSC has lowered this amount to 0.06 percent, a level conforming with the maximum permissible under the Lead-Based Paint Poisoning Prevention Act. This Act, administered primarily by the Department of Housing and Urban Development, prohibits application of lead-based paint to housing constructed or rehabilitated with federal assistance. Exempted from the new ban are mirrors backed with lead-containing paint which are part of articles of furniture, as well as artists' paints and related materials. Also exempted, provided they bear specified cautionary labeling, are certain agricultural and industrial coatings, touch-up coatings for appliances and lawn and garden equipment, graphic arts coatings, and certain coatings for powered model aircraft. This ban under the Consumer Product Safety Act will take effect 180 days after publication September 1 in the Federal Register and will apply to products manufactured on and after that date
Refrigerator Repaired by Amana Amana Refrigeration, Inc., Amana, Iowatoday announced voluntary corrective action program involving approximately 240,000 Amana side-by-side refrigerator/freezers manufactured between February 1969 and September 1974. Those refrigerator/freezers to be repaired are Amana model numbers SR 17, SR 19, SR 22, SR 25, SD 19, SD 22, and SD 25. The units can be further identified by checking the serial numbers on the serial plate located behind the removable black grill at the front of the refrigerator/freezer. Those serial numbers beginning with the letters S, E, B, L, A, or C are affected by this program. These refrigerator/freezers contain a hinge wire assembly in both of the doors which powers the heaters to the butter keeper and the anti-sweat device. The hinge wire may wear from frequent door openings causing contact between the bare wire and the inside of the door. There is a possibility that someone contacting or grasping both of the doors at the same time will be severely shocked. Forty-one shock incidents have been reported to the Commission. Amana is identifying and contacting owners of these refrigerator/freezers by letter in order to advise that modifications to eliminate this potential hazard should be made by the owner without delay. Until the written instructions are received consumers owning this product are advised to contact Amana through its toll-free number 800/553-6333 or write directly to Amana at: Amana Refrigeration Inc., Amana, Iowa 52204. In the event that Amana can not be reached, consumers are advised to contact the U.S. Consumer Product Safety Comnission's toll-free HOTLINE at 800/638-2772. Important Information About The Safety Of Your Side-By-Side Refrigerator Dear Amana Owner: Amana products have earned an excellent reputation for quality and safety. This comes in part through continued testing and monitoring of performance both in our plants and in the homes of our customers. However, some of the units, we have discovered, have had the wiring installed incorrectly. You may have one of these units. Excessive wear in these units can result in the electrical wires wearing out in the freezer or refrigerator door. Should this happen in either door, you may receive a severe electrical shock if you touch both door handles at the same time. The units involved were produced from February 1969 through September 1974, models beginning with the letters SR or SD. These are further identified by the letters S, E, B, L, A or C preceding the serial numbers. Our records indicate that you have one of these units. Please take the following steps at once. You should have no reluctance to perform these steps as they do not pose any hazard whatsoever. If you take these steps, you will eliminate any possibility of the shock hazard described above. In taking these steps, refer to the illustration. Disconnecting Hinge Wires 1. Remove Black Grille. 2. Unplug each plug. 3. Install Black plugs enclosed. 4. Add safety sticker to each wire. 5. Replace black grille.
High Chair Recalled by Century NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 Note: Replacements are no longer available. Do not use these products. Please discard or destroy these products. FOR IMMEDIATE RELEASE Originally issued August 22, 1977; Revised August 27, 2001 Release # 77-092 High Chair Recall WASHINGTON, D.C. (AUG. 22) -- Century Products Inc. and the U.S. Consumer Product Safety Commission (CPSC) today announced a voluntary recall of Century's non-folding 747 Command high chair. According to the Commission's staff, this chair could break at the weld which joins the metal support column with a metal seat support plate. If this should occur, the chair seat and any young child in the seat could fall to the floor. The recall involves only the non-folding 747 Command high chair in which the metal pedestal column is welded to a metal support plate fastened to the bottom of a plastic seat and involves no other chair manufactured by Century. The non-folding 747 high chair can be identified by numbers found on the back of the plastic seat. Only units bearing these numbers, 7403 through 7412, 7501 and 7502, are affected. Approximately 600 of these chairs were produced between March 1, 1974, and February 28, 1975, and distributed in Alabama, California, the District of Columbia, Florida, Georgia, Illinois, Louisiana, Massachusetts, Mississippi, New York, New Jersey, Ohio, ad Pennsylvania. The retail price of the units was approximately $24.95. Consumers who have one of these high chairs should stop using it and discard or destroy the product. Replacement high chairs are no longer available. For more information, the company's customer service number is 800-345-4109.
August 17, 1977 Release # 77-086 WASHINGTON, D.C. (Aug. 17) -- Black and Decker Manufacturing Company, in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced a voluntary recall of approximately 40,000 No. 8209 Type 1 weed and grass trimmers. The trimmers were produced in the spring and summer of 1977 and distributed nationwide. The orange-colored trimmer has a suggested retail price of $59.99 and uses nylon line to cut weeds and grass. It is sold with an unassembled two-part handle that consumers must assemble prior to use. According to Black and Decker, engineering tests have indicated that consumers could damage the insulation surrounding the electrical cord when assembling the handle. Such damage could result in serious electrical shock. Consumers are urged to immediately stop using the No. 8209 Type 1 trimmer and to return it to only a Black and Decker service center or a Black and Decker-authorized service center listed in the Yellow Pages. Products subject to the recall will be modified to a No. 8209 Type 2 trimmer at no cost to the consumer. All No. 8209 Type 2 trimmers incorporate an additional safety feature to safeguard against any future possibility of electrical shock from this problem. Black and Decker, which informed CPSC of the potential safety hazard on August 1, has mailed certified letters providing recall instructions to all consumers who mailed in the registration card packed with the trimmer. Consumers who require additional information should place a collect call to Black and Decker, 301/828-2955, between 8 A.M. and 5 P.M. Eastern Daylight Time
Smoke Detectors Recalled by BRK Electronics NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE August 1, 1977 Release # 77-083 Recall Of Smoke Detectors Continues WASHINGTON, D.C. (Aug. 1) -- BRK Electronics, in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today issued a second notice of the recall of all BRK SS749 series smoke detectors manufactured before September 26, 1975. The first notice of this recall was issued January 25, 1977, but between 85-90,000 of these smoke detectors have not been located. The recall was begun voluntarily by BRK when the company discovered that incorrectly- rated resistors were used in the SS749 series smoke detectors produced from March 1974 to September 26, 1975. These resistors could fail, making the unit inoperable, and may under certain circumstances cause a fire inside the detector. Although the detector is enclosed in self-extinguishing plastic, the units are being recalled as a precautionary measure. According to BRK, all distributors who purchased the detectors have been contacted and with the company's help have been notifying the contractors who installed the detectors to organize factory supervised replacement programs. The units subject to this recall are 110 volt AC-powered detectors which sold for a suggested retail price of $39.95. No battery-powered detectors are involved. Some models were manufactured with ordinary power cords (line cord) which plug into wall outlets, others have pigtail leads (hard wire) for installation directly into the household circuit The units subject to this recall are 110 volt AC-powered detectors which sold for a suggested retail price of $39.95. No battery-powered detectors are involved. Some models were manufactured with ordinary power cords (line cord) which plug into wall outlets, others have pigtail leads (hard wire) for installation directly into electric wiring. The detectors were marketed by BRK, American Machine & Foundry (AMF), I-T-E Imperial Corporation (I-T-E) and Sears, Roebuck & Company (Sears). They have the following model numbers: BRK SS749AC (hard wire) SS749ACS (hard wire) SS749L (line cord) SS749SL (line cord) AMF 2000AC (hard wire) 2000ACL (line cord) I-T-E IT0l-AC (hard wire) Sears 9-57049 (hard wire) 9-57047 (line cord) 9-57048 (line cord) Homeowners who suspect they have one of these smoke detectors are urged to check the model number on their unit. (Caution: Before inspecting hard-wired detectors, electrical power to the unit must be turned off at the fuse box or circuit breaker; line cord detectors must be unplugged before inspection). Once the power is off, remove the cover and examine the side of the plastic base for a label which contains the model number. Anyone who has one of the Sears units affected by this recall should contact the nearest Sears store, which will arrange for inspection and free replacement of the unit containing the defect. People who believe they have any of the other detectors under recall should contact BRK to obtain a fact sheet, which gives very specific criteria for identifying potentially defective units, as well as replacement instructions. Additional information concerning the recall can be obtained by contacting BRK Electronics, 780 McClure Avenue, Aurora, Illinois 60507, Attention: Dennis Wm. Clair, Project 749 Director; or by calling toll-free 800/323-9005 and asking for the Project 749 Department.
July 29, 1977 Release # 77-081 WASHINGTON, D.C. (July 29)-- Master Lock Company, Milwaukee, Wisconsin, in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced a voluntary recall of approximately 32,000 "Master" number 2551 battery-operated smoke alarms and number 2553 dual-powered smoke alarms made late in 1975 and during part of 1976. The recalled smoke alarms can be identified by the following range of serial numbers: 1 to 10,000; 17,735 to 20,000 and 2,000,001 to 2,020,000. The serial number is located on the back cover of the smoke alarm under the mounting bracket. Some of the units may fail to alarm when the relative humidity is over 70% in the home because they were inadequately cleansed of soldering flux after initial assembly. Other units may not be sensitive enough to alarm at minimum smoke levels set by industry standards. The company has received one complaint from a consumer who noticed an alarm did not function properly during a routine test. Consumers who own a "Master" smoke alarm with a serial number that falls within the range of 1 to 10,000; 17,735 to 20,000 or 2,000,00l to 2,020,000 are asked to write: Master Lock Company, 2600 N. 32nd Street, Milwaukee, Wisconsin 53210, Attention: Department #16, including their name, address, telephone and serial number of the alarm. The company will promptly send the consumer a form detailing full return instructions. The units will either be replaced or corrected, depending on the problem, without cost to the consumer. Consumers who require additional information should write to the company
Automatic Baseball Pitching Machines Warning NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE July 21, 1977 Release # 77-078 Warning Issued On Automatic Baseball Pitching Machines WASHINGTON, D.C. (July 21) -- The Consumer Product Safety Commission (CPSC) today issued an urgent warning to purchasers and users of certain automatic baseball pitching machines of the potential for severe bodily injury which the machines present. The machines are labeled as follows: "Blazer (Champ)," the "Professional," "Range, " "Pro-Trainer (Olympia)," and/or the "Dudley Automatic Pitching Machine." They were manufactured by Commercial Mechanisms, Inc., of Spring Park, Minnesota, and Kansas City, Missouri. The Commission has two reports of permanent and severe brain damage resulting from these machines. There are about 18 other injuries including brain concussions, severe lacerations and severe facial disfigurement. The Commission has authorized its staff to prepare the necessary papers for filing a complaint in U.S. District Court seeking recall of the machines and a declaration that they are an imminent hazard. About 5,000 of these machines have been distributed throughout the United States to schools, colleges, clubs, recreation departments, and other athletic organizations. They were manufactured from 1963 to 1975. The Commission is asking consumers who have access to or know the location of a machine to call tie U.S. Consumer Product Safety Commission's toll-free hotline 800/638-2772. The pitching machines have rotary pitching arms propelled by a gasoline engine or electric motor which powers a gear, pulley and tension spring mechanism. The revolving pitching arm which has no guard retains sufficient energy to "pitch" even though the machines are unplugged or disconnected. This energy can release the pitching arm after only slight vibration of the machine. The downward rotation of the pitching arm at high velocity has resulted in serious injuries to persons in its path. The pitching arm may also separate from the machine during operation, becoming an uncontrolled and potentially lethal missile. The machines may also fire pitches erratically in unintended directions. Consumers are alerted to follow these important safety precautions: Avoid placing any portion of the body within the arc or path through which the pitching arm revolves, unless the machine is disconnected from its power source and the coil spring is disengaged from the spring holder. Disengage the coil spring from the spring holder after use, and lock the machine in a location that will restrict unauthorized or unsupervised access. If the machine must be moved, disconnect the machine from its power source and disengage the coil spring from the spring holder before moving. Never store the pitching machine with the pitching arm in the 10:00 o'clock position. An Example of A Pitching Machine With An Unguarded Arm (Blazer "Little Champ" Model) Guardless
June 23, 1977 Release # 77-070 WASHINGTON, D.C. (June 23) -- The U.S. Consumer Product Safety Commission and Under Sea Industries of Compton, California today announced a recall of all Scubapro Mark VII and Pilot Mark VII scuba regulators produced since August 25, 1976. The regulators may contain a defective "O" ring in the first stage which could result in failure of the unit's audio warning device, or in a reduction in the air flow to the diver. In either event, there is a potential for serious injury or suffocation, according to the Commission staff. No injuries associated with these regulators have been reported to the Commission. Approximately 2200 regulators are being recalled. The Mark VII and the Pilot Mark VII retail for approximately $180 and $270 respectively. Consumers who have purchased one of these regulators since August 25, 1976 should return it to the place of purchase in order to have the "O" rings replaced free of charge
Product Substitution For Excedrin Announced NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE June 7, 1977 Release # 77-059 Product Substitution For Excedrin Announced WASHINGTON, D.C. (June 7) -- Bristol Myers Products, a division of Bristol Myers Company, and the Consumer Product Safety Commission (CPSC) announced today a product substitution of the company's 225 tablet package size and 375 tablet size of Excedrin analgesic tablets which were distributed nationwide prior to April 1977. CPSC testing found same packages for this product failed to comply with Federal regulations requiring that the packages be child-resistant. The product substitution covers warehouse inventories of those major wholesale and retail customers handling approximately 81% of the merchandise. Existing inventories of these packages are being retrieved and replaced by upgraded packages which were tested by Bristol Myers to assure CPSC compliance. The product substitution will involve approximately 150,000 packages and will be completed by the middle of June. These two sizes represent less than 3% of Excedrin analgesic annual unit sales volume. Bristol Myers Products, in addition, has improved its packages for these sizes of Excedrin analgesic products and has expanded its quality control program to reduce the likelihood of similar situations arising in the future. This program is not a substitute for any legal action which may be deemed necessary by CPSC.
June 7, 1977 Release # 77-058 WASHINGTON, D.C. (June 7) -- King Athletic Goods, Fairfield, New Jersey, in cooperation with the U.S. Consumer Product Safety Commission (CPSC) is offering an update kit to repair a possible defect on the "King Sport" aluminum bat. Commission reports indicate that the rubber grips on these aluminum baseball bats can become loose, worn, torn or otherwise damaged. According to Commission staff, this creates a risk of injury because a bat while in use may separate from a deteriorated grip, may be propelled through the air, and may strike a person. To prevent this, King Athletic is offering the update kit free of charge. Only bats sold under the trade name of "King Sport" are subject to this repair. Owners of such bats are asked to write to King Athletic Goods, 277 Fairfield Road, Fairfield, New Jersey, indicating: the Model Number, Length and Color of Bat, Dealer's Name and Address, and the approximate date of purchase. The appropriate repair kit will be sent to the consumer as soon as possible
Air Humidifiers Recalled by Air Comfort NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE June 3, 1977 Release # 77-054 Recall Of Air Humidifiers Announced WASHINGTON, D.C. (June 3) -- The U.S. Consumer Product Safety Commission (CPSC), and the Air Comfort Division of the McGraw-Edison Company, Albion, Michigan, today announced the voluntary recall of one model of a console air humidifier, and one model of a combination air cleaner/humidifier. The recall involves inspecting the fan speed control. The 6,002 units of the suspect models were produced between July 1974 and July 1975. Some of these units contain a speed control which could short circuit and, under certain circumstances, could smoke or burn. The console humidifier is identified by type number 9Al5GA, serial numbers L9000001 through L9002502, and L9003501 through L9005500. The combination air cleaner/humidifier is type number 9A16RA, serial numbers L9025501 through L9025823 and L9026100 through L9027000. The identifying type and serial numbers are displayed on a rating plate located on the lower right hand corner of the rear panel of the units. McGraw-Edison has instituted a certified mail notification program aimed at reaching all dealers, distributors and known consumers of these products. This press release is issued in the interest of consumer safety to notify persons who could not be reached otherwise through customer records. The Company asks that owners of suspect models not use the products until the fan speed control is checked by factory authorized personnel. Consumers are advised to disconnect their humidifiers by unplugging the electric supply line cord from the wall socket. Free inspection and repair will be made by authorized representatives. Consumers are asked to notify the dealer where the suspect humidifiers were purchased in order to initiate the inspection and repair process, if repairs prove necessary.
Electric Train Transformers Recalled by Boyd Models NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE April 15, 1977 Release # 77-035 CPSC Announces Toy Recall WASHINGTON, D.C. (Apr. 15) -- The U.S. Consumer Product Safety Commission (CPSC) today announced the recall of three(3) electric train transformers which fail to comply with federal regulations for electrically- operated toys and are, therefore, banned from sale. The recalled items, all distributed by Boyd Models, Costa Mesa, California, are "Marklin Mini-Club Transformer Model #6727," "Marklin Transformer, Model #6153," and "Marklin Transformer, Model #6667." Model numbers 6667, 6727, and 6153, contain improperly soldered connection and are therefore in violation of the Federal Hazardous Substances Act (FHSA). All three(3) transformers are constructed of blue plastic. The model number is printed on the metal face plate of these transformers. The toys were distributed nationwide to hobby and toy stores. Model #6727 retailed from $29.95 to $52.95; model #6153 retailed from $38.95 to $54.95; and model #6667 retailed from $31.95 to $39.95. Approximately four hundred(400) units are being recalled. The FHSA requires banned products to be repurchased by the manufacturer, distributor and dealer. Therefore, Boyd Models, in compliance with the FHSA regulations, is asking consumers to return the toys to the place of purchase or directly to the distributor, Boyd Models, 1837 Whittier Avenue, Building(B)-1, Costa Mesa, California 92626 for a full refund including tax and reasonably necessary transportation costs. If the consumer agrees replacement of the product, in place of repurchase, is also possible. The Commission learned of this violation as the result of a nationwide electric toy survey it conducted late last fall. The Commission's Los Angeles Area Office is monitoring the recall.
Road Racing Sets & Power Pack Toy Transformers Recalled by Strombecker NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE April 11, 1977 Release # 77-033 CPSC Announces Toy Recall WASHINGTON, D.C. (Apr. 11) -- The U.S. Consumer Product Safety Commission (CPSC) today announced the recall of three electric toy road racing sets and certain power pack transformers sold separately. These items fail to comply with Federal regulations for electrically-operated toys and are, therefore, banned from sale. The recalled items, all distributed by Strombecker Corporation, Chicago, Illinois, are "ROAD AMERICA RACE SET - Model #9900," "MONZA ROAD RACE SET - Model #9902," "CAN AM ROAD RACE SET - Model #9924" and replacement power pack toy transformer Model #9703-G. Road Race Set Model numbers 9900, 9902 and 9924 contain power pack toy transformers which fail to comply with certain requirements of the Federal Hazardous Substances Act (FHSA) and pose a potential electrical shock hazard to the user. No injuries associated with these toys have been reported to the Commission. The power pack toy transformers are colored blue-gold or blue-yellow with a black base, the casing is labeled in part, "Power Pack Toy Transformer" near two rivets on either side of the on-off switch and hole in the base. The toys were distributed nationwide to hobby and toy stores. Electric toys are subject to regulation under the FHSA which requires banned toys to be repurchased or replaced by the manufacturer, distributor and dealer. Strombecker Corporation, in compliance with the FHSA regulations, is asking consumers to return the toy to place of purchase or directly to the manufacturer-- Strombecker Corporation, 66 North Pulaski Road, Chicago, Illinois 60624, telephone (312)638-1000 -- for a full refund including tax and reasonably necessary transportation costs or replacement if the consumer agrees to it. The Commission learned of this product as a result of a nationwide electric toy survey it conducted late last year. The Commission's Chicago Area 3ffice is monitoring the recall.
Mr. Coffee Coffemakers Recalled by North American Systems NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE May 5, 1977 Release # 77-045 Recall Of "Mr. Coffee" Announced WASHINGTON, D. C. (May 5) -- The Consumer Product Safety Commission (CPSC), and North American Systems, Inc., manufacturer of the "Mr. Coffee" coffemaker, announced today that North American has initiated a voluntary recall to modify 3.1 million of its machines, manufactured from July through December 1975, and distributed nationwide, which the staff of CPSC believes might pose a potential shock and/or fire hazard. The company emphasized that out of the total number of machines subject to modification, only a relatively small number may pose a hazard. North American Systems, Inc. stated it is taking this voluntary action in order to cooperate with CPSC. "Mr. Coffee" coffeemakers subject to the modification are identifiable by a letter and a two-digit number etched into the upper right-hand portion of the outside of the back cover plate. Only those machines bearing the letters "G", "H", "I", "J", "K', and "L", and the number "75" are affected. (For example, "G-75".) The company asks that consumers examine their machines for these markings, and, if their machines fall into this group, that they write to P.O. Box 22132, Cleveland, Ohio 44122, supplying their name, address, telephone number and the code number of the machine. The company will maintain records of the names, addresses, and phone numbers of these consumers and, will promptly contact them and inform them where to take their machines for free modification. Pending modification of these machines, the company recommends that owners follow these important safety instructions: Do not leave the machine unattended while in use. Be sure to unplug the machine when it is not in use. Turn off the brewing switch when the brewing cycle is completed and turn off the warming switch when the coffee is no longer being kept warm. Do not tamper with or attempt to adjust the machine. The machine should be serviced only by an authorized "Mr. Coffee" service center. The voluntary corrective action plan has been accepted by the Commission. In a related action the Commission has provisionally accepted $25,000 to settle an alleged timeliness violation.