Loading...
Loading...
All product recalls associated with THOR MOTOR COACH.
Total Recalls
1000
Past Year
100
Class I (Serious)
84
Most Recent
Dec 2025
Data from FDA, USDA, CPSC, and NHTSA public records. Recall counts vary by company size, industry, and reporting practices. Always check official sources for current information.
THOR MOTOR COACH (TMC) IS RECALLING CERTAIN MODEL YEAR 2012 FREEDOM ELITE MOTOR HOMES MANUFACTURED FROM FEBRUARY 1, 2011, THROUGH FEBRUARY 16, 2011. THE BRACKETS ATTACHING THE GRAY WATER TANK TO THE VEHICLE IS NOT PROPERLY ATTACHED TO THE TANK.
This recall affects all 2009 LT-Z400 and LT-Z400Z QuadSport ATVs. The words "QuadSport" and the model number are written on the front left fender of the ATV.
THOR MOTOR COACH (TMC) IS RECALLING CERTAIN RECREATIONAL VEHICLES MANUFACTURED FROM MARCH 9, 2010, THROUGH MARCH 9, 2011. THE WIRING FOR THE OXYGEN (O2) SENSOR THAT CONNECTS TO THE CATALYTIC CONVERTER MAY NOT BE PROPERLY SECURED. WHEN NOT SECURED, WIRING CAN FALL ONTO THE EXHAUST, MELT, AND SHORT OUT CAUSING A CHECK ENGINE LIGHT (CEL) AND, IN SOME CASES, THE ENGINE TO SHUT DOWN WHILE DRIVING.
ARVINMERITOR IS RECALLING CERTAIN MC16 AND MC16 TYPE TAG AXLE ASSEMBLIES THAT WERE SHIPPED TO MOTOR COACH INDUSTRIES BETWEEN OCTOBER 21, 2010, AND DECEMBER 6, 2010, FOR USE ON RECREATIONAL VEHICLES. BOLTS USED TO CONNECT THE AXLE HOUSING TO THE SPINDLE OF THE AXLE MAY NOT HAVE BEEN PROPERLY HEAT TREATED, RESULTING IN POTENTIALLY COMPROMISED HARDNESS AND STRENGTH THAT, IN TURN COULD LEAD TO REDUCED JOINT INTEGRITY.
This recall involves Buzz Lightyear, Tinker Bell and Lightning McQueen brand light-up watches. The Buzz Lightyear watch has a blue band with a blue outline on the face of the watch. The Tinker Bell watch has a purple band and purple crystals on the face of the watch. The Lightning McQueen watch has a red band and a red outline on the face of the watch. Each model watch is sold separately and is intended for children ages three years and older. All have a light up function that enables a child to press a button to illuminate colorful lights on the dial of the watch. A tracking code is engraved on the back of the watch, as well as printed on the back of the packaging. The tracking code is: K130-6377-7-10187.
This recall involves the LED 12-volt lamps with UL number E316865. The UL number is found on a label located at the base of each lamp.
ARVINMERITOR IS RECALLING CERTAIN TL SERIES TRAILER AXLES THAT CONTAIN THE FAG BRAND BEARING SYSTEM. THESE AXLES ARE SOLD AND INSTALLED AS ORIGINAL EQUIPMENT ON VARIOUS RECREATIONAL VEHICLES. THE BEARING SYSTEM HAS EXHIBITED LOW DURABILITY LIFE IN CERTAIN VEHICLE APPLICATIONS.
ARVINMERITOR IS RECALLING CERTAIN TL SERIES TRAILER AXLES SOLD AS AFTERMARKET REPLACEMENT EQUIPMENT AND SOLD AND INSTALLED AS ORIGINAL EQUIPMENT IN HEAVY TRUCKS AND RECREATIONAL VEHICLES. THE SPINDLE NUT MAY NOT HAVE BEEN PROPERLY TORQUED OR NOT TORQUED AT ALL ALLOWING EXCESSIVE END-PLAY IN THE WHEEL-END SYSTEM AND COULD PROGRESS TO A WHEEL SEPARATION.
The recalled mini tillers have Honda GX25 mini four-stroke engines and their engine serial numbers can be found on the engine near the fuel tank cap. Both brands come in red and black. Honda Mini Tiller: Model number FG110 with serial numbers GCALT 1696948 to 1700567.Mantis Mini Tiller: Model numbers 7262 and 7270 with serial numbers GCART-1165215 to 1171495.
The recall involves the grab bar on Tike Tech Single City X3 and X3 Sport strollers. "Tike Tech" is printed on the footrest and on the back of the stroller on the left and right sides. The ID codes are located on the interior left side frame. The following ID codes are included in this recall: ID-Codes TT-18-01 TT-18-02 TT-18-03 TT-18-04 TT-18-05 TT-18-06 TT-18-07 The grab bar is optional and can be removed from the stroller.
ARVINMERITOR IS RECALLING CERTAIN MPA TRAILER SUSPENSION SYSTEMS INSTALLED AS ORIGINAL EQUIPMENT ON VARIOUS HEAVY TRUCKS. THE SYSTEMS WERE SHIPPED TO VEHICLE MANUFACTURERS BETWEEN APRIL 12, 2010, AND JUNE 30, 2010. THE SUSPECT SYSTEMS MAY HAVE MISSING WELDS AT THE INTERFACE OF THE LOWER SEAT BRACKET AND AXLE BEAM.
This recall involves Toro® Power Clear 180 Single Stage snow blowers. The recalled snow blowers have model numbers 38272 and 38282. Serial numbers included in the recall range from 310000001 through 310999999. The model and serial number can be found on a decal on the lower right side of the snow blower.
UFI FILTERS USA IS RECALLING CERTAIN AFTERMARKET FUEL FILTERS SOLD UNDER THE PUROLATOR BRAND NAME, P/N F65277, SHIPPED FROM MARCH 11 THROUGH APRIL 27, 2010, FOR USE ON VARIOUS PASSENGER VEHICLES. DUE TO INCORRECT DESIGN, THE QUICK CONNECTORS MAY NOT FUNCTION PROPERLY.
ARVINMERITOR IS RECALLING CERTAIN FRONT AND TAG AXLE ASSEMBLIES SOLD AND INSTALLED AS ORIGINAL EQUIPMENT FOR CERTAIN MCI TRANSIT BUSES. THE SUSPECT AXLES MAY HAVE HAD IMPROPER TORQUE APPLIED TO THE HUB/ROTOR/WHEEL ADAPTER BOLTS DURING THE ASSEMBLY PROCESS. REDUCED BOLT TORQUE COULD LEAD TO VIBRATION LOOSENING OF THE BOLT.
This recall involves the non-power steering models. Model names can be found on both the right and left hand side of the unit on the side panel.The following model numbers are affected by this recall: Model Year Model Name Model Number 2009 Grizzly 550 YFM550FGHY 2009 Grizzly 550 YFM550FGY 2010 Grizzly 550 FM550FGHZ 2010 Grizzly 550 YFM550FGZ Model Year Model Name Model Number 2008 Grizzly 700 YFM700FGHX 2008 Grizzly 700 YFM700FGX 2009 Grizzly 700 YFM700FGHY 2009 Grizzly 700 YFM700FGY 2010 Grizzly 700 YFM700FGHZ 2010 Grizzly 700 YFM700FGZ
VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
SmarTemp Disposable Probe covers may contain microscopic holes in the molded seam that would allow liquids or body fluids inside the cover and potentially contaminate the temperature probe.
SmarTemp Disposable Probe covers may contain microscopic holes in the molded seam that would allow liquids or body fluids inside the cover and potentially contaminate the temperature probe.
SmarTemp Disposable Probe covers may contain microscopic holes in the molded seam that would allow liquids or body fluids inside the cover and potentially contaminate the temperature probe.
A component used in assembly is out of specification, resulting in failure to retract, eject specimens, exposure below the safety zone, piercing of specimen tubes, or error message to display.